Simon Löw: Catalogue data in Autumn Semester 2019

Name Prof. em. Dr. Simon Löw
Name variantsSimon Loew
FieldIngenieurgeologie
Address
Geologisches Institut
ETH Zürich, NO G 69.2
Sonneggstrasse 5
8092 Zürich
SWITZERLAND
Telephone+41 44 633 32 31
E-mailsimon.loew@erdw.ethz.ch
URLhttp://www.engineeringgeology.ethz.ch/
DepartmentEarth Sciences
RelationshipProfessor emeritus

NumberTitleECTSHoursLecturers
651-2915-00LSeminar in Hydrology0 credits1SP. Burlando, J. W. Kirchner, S. Löw, D. Or, C. Schär, M. Schirmer, S. I. Seneviratne, M. Stähli, C. H. Stamm, University lecturers
Abstract
Objective
651-3525-AALIntroduction to Engineering Geology
Enrolment ONLY for MSc students with a decree declaring this course unit as an additional admission requirement.

Any other students (e.g. incoming exchange students, doctoral students) CANNOT enrol for this course unit.
3 credits6RS. Löw
AbstractThis introductory course starts from a descriptions of the behavior and phenomena of soils and rocks under near surface loading conditions and their key geotechnical properties. Lab and field methods for the characterization of soils, rocks and rock masses are introduced. Finally practical aspects of ground engineering, including tunneling and landslide hazards are presented.
ObjectiveUnderstanding the basic geotechnical and geomechanical properties and processes of rocks and soils. Understanding the interaction of rock and soil masses with technical systems. Understanding the fundamentals of geological hazards.
ContentRock, soil and rock mass: scale effects and fundamental geotechnical properties. Soil mechanical properties and their determination. Rock mechanical properties and their determination. Fractures: geotechnical properties and their determination. Geotechnical classification of intact rock, soils and rock masses. Natural and induced stresses in rock and soil. Interaction of soil masses with surface loads, water and excavations. Slope instability mechanisms and stability analyses. Underground excavation instability mechanisms and rock deformation. Geological mass wasting processes.
Lecture notesLecture Material as defined in German PPT Slides of the German Course “651-3525-00L Ingenieurgeologie”.
LiteratureFor English speakers study chapters 1-3 of Part I of the book “Geological Engineering” (Gonzalez de Vallejo & Ferrer 2011, CRC Press), without groundwater flow, consolidation time, geophysical methods, details of triaxial tests in soils and rocks, details of clay mineralogy.
Prerequisites / NoticeParticipate on all exercises of “651-3525-00L Ingenieurgeologie”, Thursday 13-14 pm.
Participate in Written Exam together with students of the German Course
651-3525-00LIntroduction to Engineering Geology4 credits2V + 1US. Löw, M. Ziegler
AbstractThis introductory course starts from a descriptions of the behavior and phenomena of soils and rocks under near surface loading conditions and their key geotechnical properties. Lab and field methods for the characterization of soils, rocks and rock masses are introduced. Finally practical aspects of ground engineering, including tunneling and landslide hazards are presented.
ObjectiveUnderstanding the basic geotechnical and geomechanical properties and processes of rocks and soils. Understanding the interaction of rock and soil masses with technical systems. Understanding the fundamentals of geological hazards.
ContentRock, soil and rock mass: scale effects and fundamental geotechnical properties. Soil mechanical properties and their determination. Rock mechanical properties and their determination. Fractures: geotechnical properties and their determination. Geotechnical classification of intact rock, soils and rock masses. Natural and induced stresses in rock and soil. Interaction of soil masses with surface loads, water and excavations. Slope instability mechanisms and stability analyses. Underground excavation instability mechanisms and rock deformation. Geological mass wasting processes.
Lecture notesWritten course documentation available under "Kursunterlagen".
LiteraturePRINZ, H. & R. Strauss (2006): Abriss der Ingenieurgeologie. - 671 S., 4. Aufl., Elsevier GmbH (Spektrum Verlag).

CADUTO, D.C. (1999): Geotechnical Engineering, Principles and Practices. 759 S., 1. Aufl., (Prentice Hall)

LANG, H.-J., HUDER, J. & AMMAN, P. (1996): Bodenmechanik und Grundbau. Das Verhalten von Böden und die wichtigsten grundbaulichen Konzepte. - 320 S., 5.Aufl., Berlin, Heidelberg etc. (Springer).

HOEK, E. (2007): Practical Rock Engineering - Course Notes. http://www.rocscience.com/hoek/PracticalRockEngineering.asp

HUDSON, J.A. & HARRISON, J.P. (1997): Engineering Rock Mechanics. An Introduction to the Principles. - 444 S. (Pergamon).
701-0565-00LFundamentals of Natural Hazards Management3 credits3GH. R. Heinimann, B. Krummenacher, S. Löw
AbstractRisks to life and human assets result when settlement areas and infrastructure overlap regions where natural hazard processes occur. This course utilizes case studies to teach how a future natural hazards-specialist should analyze, assess and manage risks.
ObjectiveConcepts will be explained step-by-step through a set of case studies, and applied in lab by the students. The following principal steps are used when coping with natural hazard-risks. At each step, students will learn and apply the following skills:
Risk analysis - What can happen?
-Characterize the processes and environmental measures that lead to a natural hazard and integrate modeling results of these processes.
- Identify threats to human life and assets exposed to natural hazards and estimate possible drawbacks or damages.
Risk assessment - What are the acceptable levels of risk?
- Apply principles to determine acceptable risks to human life and assets in order to identify locations which should receive added protection.
- Explain causes for conflicts between risk perception and risk analysis.
Risk management - What steps should be taken to manage risks?
- Explain how various hazard mitigation approaches reduce risk.
- Describe hazard scenarios as a base for adequate dimensioning of control measures.
- Identify the best alternative from a set of thinkable measures based on an evaluation scheme.
- Explain the principles of risk-governance.
ContentDie Vorlesung besteht aus folgenden Blöcken:
1) Einführung ins Vorgehenskonzept (1W)
2) Risikoanalyse (6W + Exkursion) mit:
- Systemabgrenzung
- Gefahrenbeurteilung
- Expositions- und Folgenanalyse
3) Risikobewertung (2W)
4) Risikomanagement (2W + Exkursion)
5) Abschlussbesprechung (1W)