Konrad Wegener: Courses in Spring Semester 2017

Award: The Golden Owl
Name Prof. em. Dr. Konrad Wegener
FieldProduktionstechnik und Werkzeugmaschinen
Address
Inst. f. Werkzeugmaschinen
ETH Zürich, PFA EO 94
Technoparkstrasse 1
8005 Zürich
SWITZERLAND
Telephone+41 44 632 24 19
E-mailwegener@iwf.mavt.ethz.ch
DepartmentMechanical and Process Engineering
RelationshipProfessor emeritus

NumberTitleECTSHoursLecturers
151-0034-10LEngineering Tool V: Introduction to Design of Experiments (DOE) Restricted registration - show details
Number of participants limited to 36.

Only one course can be chosen per semester. All Engineering Tool courses are for MAVT-Bachelor students only.
0.4 credits1K
151-0034-10 KIngenieur-Tool V: Einführung in die statistische Versuchsplanung (DOE) Special students and auditors need a special permission from the lecturers.
Blockkurs in der ersten Semesterwoche.
12s hrs
21.02.13:15-17:00LFW E 11 »
22.02.13:15-17:00LFW E 11 »
23.02.13:15-17:00LFW E 11 »
B. G. Rüttimann, K. Wegener
151-0055-10LEngineering Tool V: Planning of Human Work Restricted registration - show details
Number of participants limited to 20.

Only one course can be chosen per semester. All Engineering Tool courses are for MAVT-Bachelor students only.
0.4 credits1K
151-0055-10 KIngenieur-Tool V: Planung menschlicher Arbeit Special students and auditors need a special permission from the lecturers.
Der Blockkurs findet am Dienstag, Mittwoch und Donnerstag von 13.00 bis 17.00 in der ersten Semesterwoche im Gruppenraum des Technoparks ZH statt.
12s hrsP. Acél, K. Wegener
151-0057-10LEngineering Tool IV/V: Systems Engineering for Project Work Restricted registration - show details
Number of participants limited to 60.

Only one course can be chosen per semester. All Engineering Tool courses are for MAVT-Bachelor students only.
0.4 credits1K
151-0057-10 KIngenieur-Tool IV/V: Systems Engineering für Projekt- und Studienarbeiten Special students and auditors need a special permission from the lecturers.
Der Blockkurs findet in der ersten Semesterwoche statt.
12s hrs
21.02.13:15-17:00ML H 37.1 »
22.02.13:15-17:00ML H 37.1 »
23.02.13:15-17:00ML H 37.1 »
R. Züst, K. Wegener
151-0075-11LSUNCAR - iRoadster - Chassis
Prerequisite: Enrollment for 151-0075-10L SUNCAR - iRoadster - Chassis in HS16.
14 credits15A
151-0075-11 ASUNCAR - iRoadster - Chassis210s hrsK. Wegener
151-0075-31LSUNCAR - iRoadster - Antrieb
Prerequisite: Enrollment for 151-0075-30L SUNCAR - iRoadster - Antrieb in HS16.
14 credits15A
151-0075-31 ASUNCAR - iRoadster - Antrieb210s hrsK. Wegener
151-0304-00LEngineering Design II Information 4 credits4G
151-0304-00 GDimensionieren II
Vorlesung: MI, 8-10
Übungen: MI, 10-12
4 hrs
Wed08:15-10:00ML H 44 »
10:15-12:00HG D 3.1 »
10:15-12:00HG D 5.1 »
10:15-12:00IFW A 34 »
10:15-12:00IFW B 42 »
10:15-12:00IFW C 31 »
10:15-12:00IFW C 33 »
10:15-12:00ML J 34.1 »
10:15-12:00ML J 34.3 »
K. Wegener
151-0315-00LDevelopment of Complex Mechatronic Systems for Manufacturing4 credits3G
151-0315-00 GDevelopment of Complex Mechatronic Systems for Manufacturing
One lecture is roughly 2 x 90 minutes; Starting from 14.15 to 15.45 and after a small break from 16.00 to 17.30.
3 hrs
Tue14:15-18:00ML J 34.1 »
D. P. Politze, C. F. Bacs, K. Wegener
151-0700-00LManufacturing4 credits2V + 2U
151-0700-00 VFertigungstechnik
Die Vorlesung beginnt in der zweiten Semesterwoche.
2 hrs
Wed14:15-16:00HG G 3 »
K. Wegener
151-0700-00 UFertigungstechnik
Die Übung beginnt in der zweiten Semesterwoche.
2 hrs
Wed16:15-18:00HG D 1.1 »
16:15-18:00HG D 7.1 »
16:15-18:00HG G 3 »
24.05.16:15-17:00HG D 1.1 »
16:15-17:00HG D 7.1 »
16:15-17:00HG G 3 »
K. Wegener
151-0708-00LManufacturing II Information 4 credits2V + 1U
151-0708-00 VFertigungstechnik II2 hrs
Tue08:15-10:00ML H 41.1 »
K. Wegener, F. Kuster, M. Schmid, S. Weikert
151-0708-00 UFertigungstechnik II1 hrs
Tue/2w12:15-14:00LFW C 1 »
K. Wegener, F. Kuster, M. Schmid, S. Weikert
151-0712-00LEngineering Materials and Production II4 credits2V + 2U
151-0712-00 VWerkstoffe und Fertigung II
Vorlesung im HG F 7 mit Videoübertragung im HG F 5.
ACHTUNG: Wegen des Blockkurses Ingenieur-Tool I finden Vorlesung nur am Donnerstag 23.02.2017 in der ersten Semesterwoche statt.
2 hrs
Tue13:15-14:00HG F 5 »
13:15-14:00HG F 7 »
Thu08:15-10:00HG F 5 »
08:15-10:00HG F 7 »
K. Wegener
151-0712-00 UWerkstoffe und Fertigung II
in Gruppen, 14-täglich, nach Vereinbarung
Die Übungen beginnen in der zweiten Semesterwoche.
2 hrs
Mon12:15-13:00ML J 34.3 »
13:15-15:00CAB G 59 »
13:15-15:00CHN E 42 »
13:15-15:00HG E 33.1 »
13:15-15:00LFW C 5 »
13:15-15:00LFW E 13 »
13:15-15:00ML H 41.1 »
15:15-17:00LEE D 101 »
15:15-17:00ML F 34 »
Tue12:15-13:00HG D 3.1 »
14:15-16:00CAB G 61 »
14:15-16:00ETZ E 6 »
14:15-16:00HG D 7.2 »
14:15-16:00IFW B 42 »
Wed13:15-15:00ETZ E 7 »
22.02.12:15-13:00CAB G 57 »
K. Wegener
151-0720-00LProduction Machines I4 credits4G
151-0720-00 GProduktionsmaschinen I4 hrs
Tue10:15-12:00ML H 41.1 »
Thu10:15-12:00CLA E 4 »
K. Wegener, S. Weikert
151-0802-00LAutomation Technology4 credits2V + 1U
151-0802-00 VAutomation Technology2 hrs
Mon14:15-16:00LFV E 41 »
H. Wild, K. Wegener
151-0802-00 UAutomation Technology1 hrs
Mon16:15-17:00LFV E 41 »
H. Wild, K. Wegener
151-1224-00LOil-Hydraulics and Pneumatics4 credits2V + 2U
151-1224-00 VÖlhydraulik und Pneumatik2 hrs
Wed08:15-10:00ML F 39 »
31.05.10:15-13:00IFW A 36 »
J.  Lodewyks, K. Wegener
151-1224-00 UÖlhydraulik und Pneumatik2 hrs
Wed10:15-12:00ML F 39 »
J.  Lodewyks, K. Wegener