Robert Riener: Katalogdaten im Frühjahrssemester 2019

NameHerr Prof. Dr. Robert Riener
LehrgebietSensomotorische Systeme
Adresse
Professur f. Sensomotorische Syst.
ETH Zürich, TAN E 4
Tannenstrasse 1
8092 Zürich
SWITZERLAND
Telefon+41 44 632 66 79
Fax+41 44 632 18 76
E-Mailrobert.riener@hest.ethz.ch
DepartementGesundheitswissenschaften und Technologie
BeziehungOrdentlicher Professor

NummerTitelECTSUmfangDozierende
151-0623-00LETH Zurich Distinguished Seminar in Robotics, Systems and Controls Information
Students for other Master's programmes in Department Mechanical and Process Engineering cannot use the credit in the category Core Courses
1 KP1SB. Nelson, M. Chli, R. Gassert, M. Hutter, W. Karlen, R. Riener, R. Siegwart
KurzbeschreibungThis course consists of a series of seven lectures given by researchers who have distinguished themselves in the area of Robotics, Systems, and Controls.
LernzielObtain an overview of various topics in Robotics, Systems, and Controls from leaders in the field. Please see http://www.msrl.ethz.ch/education/distinguished-seminar-in-robotics--systems---controls--151-0623-0.html for a list of upcoming lectures.
InhaltThis course consists of a series of seven lectures given by researchers who have distinguished themselves in the area of Robotics, Systems, and Controls. MSc students in Robotics, Systems, and Controls are required to attend every lecture. Attendance will be monitored. If for some reason a student cannot attend one of the lectures, the student must select another ETH or University of Zurich seminar related to the field and submit a one page description of the seminar topic. Please see http://www.msrl.ethz.ch/education/distinguished-seminar-in-robotics--systems---controls--151-0623-0.html for a suggestion of other lectures.
Voraussetzungen / BesonderesStudents are required to attend all seven lectures to obtain credit. If a student must miss a lecture then attendance at a related special lecture will be accepted that is reported in a one page summary of the attended lecture. No exceptions to this rule are allowed.
376-0004-01LPraktikum Einführung Gesundheitswissenschaften und Technologie Belegung eingeschränkt - Details anzeigen
Nur für Gesundheitswissenschaften und Technologie BSc.
2 KP2PR. Müller, R. Riener, C. Wolfrum
KurzbeschreibungAusgewählte Experimente im Bereich von Gesundheitswissenschaften und Technologie als Einstieg ins wissenschaftliche Arbeiten.
LernzielMittels verschiedener Experimente sollen die Studierenden Methoden des wissenschaftlichen Arbeitens anwenden und erleben.
376-0210-00LBiomechatronics
Primär für HST-Studierende ausgelegt.

Die Biomechatronics Vorlesung ist nicht für Studierende geeignet, welche bereits die Vorlesung "Physical Human-Robot Interaction"(376-1504-00L) besucht haben, da sie ähnliche Themen abdeckt.

Matlab Kenntnisse sind vorteilhaft -> online Tutorial http://www.imrtweb.ethz.ch/matlab/
4 KP3GR. Riener, R. Gassert
KurzbeschreibungDevelopment of mechatronic systems (i.e. mechanics, electronics, computer science and system integration) with inspiration from biology and application in the living (human) organism.
LernzielThe objective of this course is to give an introduction to the fundamentals of biomechatronics, through lectures on the underlying theoretical/mechatronics aspects and application fields. In the exercises, these concepts will be intensified and trained on the basis of specific examples. The course will guide students through the design and evaluation process of such systems, and highlight a number of applications.

By the end of this course, you should understand the critical elements of biomechatronics and their interaction with biological systems, both in terms of engineering metrics and human factors. You will be able to apply the learned methods and principles to the design, improvement and evaluation of safe and efficient biomechatronics systems.
InhaltThe course will cover the interdisciplinary elements of biomechatronics, ranging from human factors to sensor and actuator technologies, real-time signal processing, system kinematics and dynamics, modeling and simulation, controls and graphical rendering as well as safety/ethical aspects, and provide an overview of the diverse applications of biomechatronics technology.
SkriptSlides will be distributed through moodle before the lectures.
LiteraturBrooker, G. (2012). Introduction to Biomechatronics. SciTech Publishing.
Riener, R., Harders, M. (2012) Virtual Reality in Medicine. Springer, London.
Voraussetzungen / BesonderesNone
376-1217-00LRehabilitation Engineering I: Motor Functions4 KP2V + 1UR. Riener, J. Duarte Barriga
Kurzbeschreibung“Rehabilitation engineering” is the application of science and technology to ameliorate the handicaps of individuals with disabilities in order to reintegrate them into society. The goal of this lecture is to present classical and new rehabilitation engineering principles and examples applied to compensate or enhance especially motor deficits.
LernzielProvide theoretical and practical knowledge of principles and applications used to rehabilitate individuals with motor disabilities.
Inhalt“Rehabilitation” is the (re)integration of an individual with a disability into society. Rehabilitation engineering is “the application of science and technology to ameliorate the handicaps of individuals with disability”. Such handicaps can be classified into motor, sensor, and cognitive (also communicational) disabilities. In general, one can distinguish orthotic and prosthetic methods to overcome these disabilities. Orthoses support existing but affected body functions (e.g., glasses, crutches), while prostheses compensate for lost body functions (e.g., cochlea implant, artificial limbs). In case of sensory disorders, the lost function can also be substituted by other modalities (e.g. tactile Braille display for vision impaired persons).

The goal of this lecture is to present classical and new technical principles as well as specific examples applied to compensate or enhance mainly motor deficits. Modern methods rely more and more on the application of multi-modal and interactive techniques. Multi-modal means that visual, acoustical, tactile, and kinaesthetic sensor channels are exploited by displaying the patient with a maximum amount of information in order to compensate his/her impairment. Interaction means that the exchange of information and energy occurs bi-directionally between the rehabilitation device and the human being. Thus, the device cooperates with the patient rather than imposing an inflexible strategy (e.g., movement) upon the patient. Multi-modality and interactivity have the potential to increase the therapeutical outcome compared to classical rehabilitation strategies.
In the 1 h exercise the students will learn how to solve representative problems with computational methods applied to exoprosthetics, wheelchair dynamics, rehabilitation robotics and neuroprosthetics.
SkriptLecture notes will be distributed at the beginning of the lecture (1st session)
LiteraturIntroductory Books

Neural prostheses - replacing motor function after desease or disability. Eds.: R. Stein, H. Peckham, D. Popovic. New York and Oxford: Oxford University Press.

Advances in Rehabilitation Robotics – Human-Friendly Technologies on Movement Assistance and Restoration for People with Disabilities. Eds: Z.Z. Bien, D. Stefanov (Lecture Notes in Control and Information Science, No. 306). Springer Verlag Berlin 2004.

Intelligent Systems and Technologies in Rehabilitation Engineering. Eds: H.N.L. Teodorescu, L.C. Jain (International Series on Computational Intelligence). CRC Press Boca Raton, 2001.

Control of Movement for the Physically Disabled. Eds.: D. Popovic, T. Sinkjaer. Springer Verlag London, 2000.

Interaktive und autonome Systeme der Medizintechnik - Funktionswiederherstellung und Organersatz. Herausgeber: J. Werner, Oldenbourg Wissenschaftsverlag 2005.

Biomechanics and Neural Control of Posture and Movement. Eds.: J.M. Winters, P.E. Crago. Springer New York, 2000.

Selected Journal Articles

Abbas, J., Riener, R. (2001) Using mathematical models and advanced control systems techniques to enhance neuroprosthesis function. Neuromodulation 4, pp. 187-195.

Burdea, G., Popescu, V., Hentz, V., and Colbert, K. (2000): Virtual reality-based orthopedic telerehabilitation, IEEE Trans. Rehab. Eng., 8, pp. 430-432

Colombo, G., Jörg, M., Schreier, R., Dietz, V. (2000) Treadmill training of paraplegic patients using a robotic orthosis. Journal of Rehabilitation Research and Development, vol. 37, pp. 693-700.

Colombo, G., Jörg, M., Jezernik, S. (2002) Automatisiertes Lokomotionstraining auf dem Laufband. Automatisierungstechnik at, vol. 50, pp. 287-295.

Cooper, R. (1993) Stability of a wheelchair controlled by a human. IEEE Transactions on Rehabilitation Engineering 1, pp. 193-206.

Krebs, H.I., Hogan, N., Aisen, M.L., Volpe, B.T. (1998): Robot-aided neurorehabilitation, IEEE Trans. Rehab. Eng., 6, pp. 75-87

Leifer, L. (1981): Rehabilitive robotics, Robot Age, pp. 4-11

Platz, T. (2003): Evidenzbasierte Armrehabilitation: Eine systematische Literaturübersicht, Nervenarzt, 74, pp. 841-849

Quintern, J. (1998) Application of functional electrical stimulation in paraplegic patients. NeuroRehabilitation 10, pp. 205-250.

Riener, R., Nef, T., Colombo, G. (2005) Robot-aided neurorehabilitation for the upper extremities. Medical & Biological Engineering & Computing 43(1), pp. 2-10.

Riener, R., Fuhr, T., Schneider, J. (2002) On the complexity of biomechanical models used for neuroprosthesis development. International Journal of Mechanics in Medicine and Biology 2, pp. 389-404.

Riener, R. (1999) Model-based development of neuroprostheses for paraplegic patients. Royal Philosophical Transactions: Biological Sciences 354, pp. 877-894.
Voraussetzungen / BesonderesTarget Group:
Students of higher semesters and PhD students of
- D-MAVT, D-ITET, D-INFK
- Biomedical Engineering
- Medical Faculty, University of Zurich
Students of other departments, faculties, courses are also welcome
376-1400-00LTransfer of Technologies into Neurorehabilitation Belegung eingeschränkt - Details anzeigen 3 KP2VC. Müller, R. Gassert, R. Riener, H. Van Hedel, N. Wenderoth
KurzbeschreibungThe course focuses on clinical as well as industrial aspects of advanced technologies and their transfer into neurorehabilitation from both theoretical and practical perspectives. The students will learn the basics of neurorehabilitation and the linkage to technologies, gain insight into the development within the medtech field and learn applications of technologies in clinical settings.
LernzielThe students will:
- Learn basics and principles of clinical neuroscience and neurorehabilitation.
- Gain insight into the technical basics of advanced technologies and the transfer into product development processes.
- Gain insight into the application, the development and integration of advanced technologies in clinical settings. This includes the advantages and limitations according to different pathologies and therapy goals.
- Get the opportunity to test advanced technologies in practical settings.
- Learn how to transfer theoretical concepts to actual settings in different working fields.
InhaltMain focus:
- Neurobiological principles applied to the field of neurorehabilitation.
- Clinical applications of advanced rehabilitation technologies.
- Visit medical technology companies, rehabilitation centers and labs to gain deeper insight into the development, application and evaluation of advanced technologie
SkriptTeaching materials will be provided for the individual events and lectures.
- Slides (pdf files)
- Information sheets and flyers of the visited companies, labs and clinics