Bozidar Stojadinovic: Katalogdaten im Herbstsemester 2017

NameHerr Prof. Dr. Bozidar Stojadinovic
NamensvariantenBozidar Stojadinovic
B. Stojadinović
Božidar Stojadinović
LehrgebietStrukturdynamik und Erdbebeningenieurwesen
Adresse
Inst. f. Baustatik u. Konstruktion
ETH Zürich, HIL E 14.1
Stefano-Franscini-Platz 5
8093 Zürich
SWITZERLAND
Telefon+41 44 633 70 99
E-Mailstojadinovic@ibk.baug.ethz.ch
URLhttps://stojadinovic.ibk.ethz.ch/people-page/professor.html
DepartementBau, Umwelt und Geomatik
BeziehungOrdentlicher Professor

NummerTitelECTSUmfangDozierende
101-0117-00LTheory of Structures III3 KP2GB. Stojadinovic
KurzbeschreibungThis course focuses on the axial, shear, bending and torsion load-deformation response of continuous elastic prismatic structural elements such as rods, beams, shear walls, frames, arches, cables and rings. Additional special topics, such as the behavior of inelastic prismatic structural elements or the behavior of planar structural elements and structures, may be addressed time-permitting.
LernzielAfter passing this course students will be able to:
1. Explain the equilibrium of continuous structural elements.
2. Formulate mechanical models of continuous prismatic structural elements.
3. Analyze the axial, shear, bending and torsion load-deformation response of prismatic structural elements and structures assembled using these elements.
4. Determine the state of forces and deformations in rods, beams, frame structures, arches, cables and rings under combined mechanical and thermal loading.
5. Use the theory of continuous structures to design structures and understand the basis for structural design code provisions.
InhaltThis is the third course in the ETH series on theory of structures. Building on the material covered in previous courses, this course focuses on the axial, shear, bending and torsion load-deformation response of continuous elastic prismatic structural elements such as rods, beams, shear walls, frames, arches, cables and rings. Additional special topics, such as the behavior of inelastic prismatic structural elements or the behavior of planar structural elements and structures may be addressed if time permits. The course provides the theoretical background and engineering guidelines for practical structural analysis of modern structures.
SkriptLecture notes "Theory of Structures III"
LiteraturMarti, Peter, “Baustatik: Grundlagen, Stabtragwerke, Flächentragwrke”, Ernst & Sohn, Berlin, 2. Auflage, 2014

Bouma, A. L., “Mechanik schlanker Tragwerke: Ausgewählte Beispiele der Praxis”, Springer Verlag, Berlin, 1993.
Voraussetzungen / BesonderesWorking knowledge of theory of structures, as covered in ETH course Theory of Structures I (Baustatik I) and Theory of Structures II (Baustatik II) and ordinary differential equations. Basic knowledge of structural design of reinforced concrete, steel or wood structures. Familiarity with structural analysis computer software and computer tools such as Matlab, Mathematica, Mathcad or Excel.
101-0157-01LStructural Dynamics and Vibration Problems3 KP2GB. Stojadinovic, V. Ntertimanis
KurzbeschreibungFundamentals of structural dynamics are presented. Computing the response of elastic and inelastic single-DOF, continuous-mass and multiple-DOF structural systems subjected to harmonic, periodic, pulse, impulse, and random excitation is discussed. Practical solutions to vibration problems in flexible structures excited by humans, machinery, wind and explosions are developed.
LernzielAfter successful completion of this course the students will be able to:
1. Explain the dynamic equilibrium of structures under dynamic loading.
2. Use second-order differential equations to theoretically and numerically model the dynamic equilibrium of structural systems.
3. Model structural systems using single-degree-of-freedom, continuous-mass and multiple-degree-of-freedom models.
4. Compute the dynamic response of structural system to harmonic, periodic, pulse, impulse and random excitation using time-history and response-spectrum methods.
5. Apply structural dynamics principles to solve vibration problems in flexible structures excited by humans, machines, wind or explosions.
6. Use dynamics of structures to identify the basis for structural design code provisions related to dynamic loading.
InhaltThis is a course on structural dynamics, an extension of structural analysis for loads that induce significant inertial forces and vibratory response of structures. Dynamic responses of elastic and inelastic single-degree-of-freedom, continuous-mass and multiple-degree-of-freedom structural systems subjected to harmonic, periodic, pulse, impulse, and random excitation are discussed. Theoretical background and engineering guidelines for practical solutions to vibration problems in flexible structures caused by humans, machinery, wind or explosions are presented. Laboratory demonstrations of single- and multi-degree-of-freedom system dynamic response and use of viscous and tuned-mass dampers are conducted.
SkriptThe electronic copies of the learning material will be uploaded to ILIAS and available through myStudies. The learning material includes: the lecture presentations, additional reading material, and exercise problems and solutions.
LiteraturDynamics of Structures: Theory and Applications to Earthquake Engineering, 4th edition, Anil Chopra, Prentice Hall, 2014

Vibration Problems in Structures: Practical Guidelines, Hugo Bachmann et al., Birkhäuser, Basel, 1995

Weber B., Tragwerksdynamik. http://e-collection.ethbib.ethz.ch/cgi-bin/show.pl?type=lehr&nr=76 .ETH Zürich, 2002.
Voraussetzungen / BesonderesKnowledge of the fundamentals in structural analysis, and in structural design of reinforced concrete, steel and/or wood structures is mandatory. Working knowledge of matrix algebra and ordinary differential equations is required. Familiarity with Matlab and with structural analysis computer software is desirable.
101-0179-00LProbabilistic Seismic Risk Analysis and Management for Civil Systems
Findet dieses Semester nicht statt.
3 KP2GB. Stojadinovic, Noch nicht bekannt
KurzbeschreibungAdvanced topics covered in this course are: 1) probabilistic seismic hazard analysis; 2) probabilistic seismic risk analysis; 3) seismic risk management using structural and financial engineering means; and, time permitting, 4) advanced topics in systemic probabilistic risk evaluation.
LernzielAfter successfully completing this course the students will be able to:

1. Gather the necessary data and conduct a probabilistic seismic hazard analysis for a site.
2. Gather the necessary data and conduct a probabilistic vulnerability analysis of a building or an element of a civil infrastructure system at a site.
3. Design structural and/or financial engineering solutions to mitigate the seismic risk at a site.
InhaltThis course extends the series of two courses on seismic design of structures at ETHZ and introduces the topic of probabilistic seismic risk analysis and seismic risk management for the build environment and civil infrastructure systems. The following advanced topics will be covered in this course: 1) probabilistic seismic hazard analysis; 2) probabilistic seismic risk analysis; 3) seismic risk management using structural and financial engineering means; and, time permitting, 4) advanced topics in systemic probabilistic risk evaluation.
SkriptThe electronic copies of the learning material will be uploaded to ILIAS and available through myStudies. This will include the lecture notes, additional reading, and exercise problems and solutions. There is no textbook for this course.
LiteraturReading material:
- Jack R Benjamin, C. Allin Cornell (2014) Probability, Statistics, and Decision for Civil Engineers
- A. H-S. Ang (Author), W. H. Tang Probability Concepts in Engineering: Emphasis on Applications to Civil and Environmental Engineering
- P.E. Pinto, R. Giannini and P. Franchin (2004) Seismic reliability analysis of structures, IUSSPress. Pavia;
- McGuire, R.K. 2004. Seismic hazard and risk analysis: EERI Monograph MNO-10, Earthquake Engineering Research Institute.
- A Mc. Neil, R. Frey and P. Embrechts, Quantitative Risk Management, Concepts, Techniques and Tools, Princeton University Press, 2015
- R. Rees, A. Wambach, The Microeconomics of Insurance, Foundations and Trends in Microeconomics, Vol. 4, Mps. 1-2 (2008), pp. 1- 163, DOI: 10.1561/0700000023
- Earthquake Engineering: From Engineering Seismology to Performance-Based Engineering, Yousef Borzorgnia and Vitelmo Bertero, Eds., CRC Press, 2004
- Dynamics of Structures: Theory and Applications to Earthquake Engineering, 4th edition, Anil Chopra, Prentice Hall, 2012
- Erdbebensicherung von Bauwerken, 2nd edition, Hugo Bachmann, Birkhäuser, Basel, 2002

References:
-Norm SIA 261: Einwirkungen auf Tragwerke (Actions on Structures). Schweizerischer Ingenieur- und Architekten-Verein, Zürich, 2003

Software:
- Bispec: software for unidirectional and bidirectional dynamic time-history and spectral seismic analysis of a simple dynamic system. http://eqsols.com/Bispec.aspx
- SAP2000 v15.1: general-purpose 3D nonlinear structural analysis software. http://www.csiberkeley.com/sap2000
- OpenSees: Open System for Earthquake Engineering Simulation, is an object-oriented, open- source software framework. http://opensees.berkeley.edu/
Voraussetzungen / BesonderesETH Seismic Design of Structures I course (101-0188-00), or equivalent. Students are expected to understand the seismological nature of earthquakes, to characterize the ground motion excitation, to analyze the response of elastic single- and multiple-degree-of-freedom systems to earthquake excitation, to use the concept of response and design spectrum, to compute the equivalent seismic loads on simple structures, and to perform code-based seismic design of simple structures.
101-0189-00LSeismic Design of Structures II3 KP2GB. Stojadinovic
KurzbeschreibungThe following advanced topics are covered: 1) behavior and non-linear response of structural systems under earthquake excitation; 2) seismic behavior and design of moment frame, braced frame, shear wall and masonry structures; 3) fundamentals of seismic isolation; and 4) assessment and retrofit of existing buildings. These topics are discussed in terms of performance-based seismic design.
LernzielAfter successfully completing this course the students will be able to:
1. Use the knowledge of nonlinear dynamic response of structures to interpret the design code provisions and apply them in seismic design structural systems.
2. Explain the seismic behavior of moment frame, braced frame and shear wall structural systems and successfully design such systems to achieve the performance objectives stipulated by the design codes.
3. Determine the performance of structures under earthquake loading using modern performance assessment methods and analysis tools.
InhaltThis course completes the series of two courses on seismic design of structures at ETHZ. Building on the material covered in Seismic Design of Structures I, the following advanced topics will be covered in this course: 1) behavior and non-linear response of structural systems under earthquake excitation; 2) seismic behavior and design of moment frame, braced frame and shear wall structures; 3) fundamentals of seismic isolation; and 4) assessment and retrofit of existing buildings. These topics will be discussed from the standpoint of performance-based design.
SkriptThe electronic copies of the learning material will be uploaded to ILIAS and available through myStudies. The learning material includes the lecture presentations, additional reading, and exercise problems and solutions.
LiteraturEarthquake Engineering: From Engineering Seismology to Performance-Based Engineering, Yousef Borzorgnia and Vitelmo Bertero, Eds., CRC Press, 2004

Dynamics of Structures: Theory and Applications to Earthquake Engineering, 4th edition, Anil Chopra, Prentice Hall, 2014

Erdbebensicherung von Bauwerken, 2nd edition, Hugo Bachmann, Birkhäuser, Basel, 2002
Voraussetzungen / BesonderesETH Seismic Design of Structures I course, or equivalent. Students are expected to understand the seismological nature of earthquakes, to characterize the ground motion excitation, to analyze the response of elastic single- and multiple-degree-of-freedom systems to earthquake excitation, to use the concept of response and design spectrum, to compute the equivalent seismic loads on simple structures, and to perform code-based seismic design of simple structures. Familiarity with structural analysis software, such as SAP2000, and general-purpose numerical analysis software, such as Matlab, is expected.
101-1187-00LKolloquium Baustatik und Konstruktion0 KP2KB. Stojadinovic, E. Chatzi, M. Fontana, A. Frangi, W. Kaufmann, B. Sudret, T. Vogel
KurzbeschreibungDas Institut für Baustatik und Konstruktion (IBK) lädt Professoren in- und ausländischer Hochschulen, Fachleute aus Praxis & Industrie oder wissenschaftliche Mitarbeiter des Institutes als Referenten ein. Das Kolloquium richtet sich sowohl an Hochschulangehörige, als auch an Ingenieure aus der Praxis.
LernzielNeue Forschungsergebnisse aus dem Fachbereich Baustatik und Konstruktion kennen lernen.
364-1058-00LRisk Center Seminar Series Belegung eingeschränkt - Details anzeigen
Maximale Teilnehmerzahl: 50
0 KP2SB. Stojadinovic, D. Basin, A. Bommier, D. N. Bresch, L.‑E. Cederman, P. Cheridito, P. Embrechts, H. Gersbach, H. R. Heinimann, M. Larsson, W. Mimra, G. Sansavini, F. Schweitzer, D. Sornette, B. Sudret, U. A. Weidmann, S. Wiemer, M. Zeilinger, R. Zenklusen
KurzbeschreibungThis course is a mixture between a seminar primarily for PhD and postdoc students and a colloquium involving invited speakers. It consists of presentations and subsequent discussions in the area of modeling complex socio-economic systems and crises. Students and other guests are welcome.
LernzielParticipants should learn to get an overview of the state of the art in the field, to present it in a well understandable way to an interdisciplinary scientific audience, to develop novel mathematical models for open problems, to analyze them with computers, and to defend their results in response to critical questions. In essence, participants should improve their scientific skills and learn to work scientifically on an internationally competitive level.
InhaltThis course is a mixture between a seminar primarily for PhD and postdoc students and a colloquium involving invited speakers. It consists of presentations and subsequent discussions in the area of modeling complex socio-economic systems and crises. For details of the program see the webpage of the colloquium. Students and other guests are welcome.
SkriptThere is no script, but a short protocol of the sessions will be sent to all participants who have participated in a particular session. Transparencies of the presentations may be put on the course webpage.
LiteraturLiterature will be provided by the speakers in their respective presentations.
Voraussetzungen / BesonderesParticipants should have relatively good mathematical skills and some experience of how scientific work is performed.