From 2 November 2020, the autumn semester 2020 will take place online. Exceptions: Courses that can only be carried out with on-site presence.
Please note the information provided by the lecturers via e-mail.

Search result: Catalogue data in Autumn Semester 2014

Biomedical Engineering Master Information
Master Programme According to Programme Regulations 2013
Track Courses
Track Core Courses
During the Master program, a minimum of 12 CP must be obtained from track core courses.
227-0385-00LBiomedical Imaging Information W4 credits3GS. Kozerke, U. Moser, M. Rudin
AbstractIntroduction and analysis of medical imaging technology including X-ray procedures, computed tomography, nuclear imaging techniques using single photon and positron emission tomography, magnetic resonance imaging and ultrasound imaging techniques.
ObjectiveUnderstand the physical and technical principles underlying X-ray imaging, computed tomography, single photon and positron emission tomography, magnetic resonance imaging, ultrasound and Doppler imaging techniques. Develop the mathematical framework to describe image encoding/decoding, point-spread function/modular transfer function, signal-to-noise ratio, contrast behavior for each of the methods.
ContentX-ray imaging
Computed tomography
Single photon emission tomography
Positron emission tomography
Magnetic resonance imaging
Ultrasound/Doppler imaging
Lecture notesLecture notes and handouts: Biomedical Imaging
LiteratureIntroduction to Medical Imaging: Physics, Engineering and Clinical Applications by Andrew Webb, Nadine Barrie Smith,
Cambridge University Press
227-0386-00LBiomedical Engineering Information W4 credits3GJ. Vörös, S. J. Ferguson, S. Kozerke, U. Moser, M. Rudin, M. P. Wolf, M. Zenobi-Wong
AbstractIntroduction into selected topics of biomedical engineering as well as their relationship with physics and physiology. The focus is on learning the concepts that govern common medical instruments and the most important organs from an engineering point of view. In addition, the most recent achievements and trends of the field of biomedical engineering are also outlined.
ObjectiveIntroduction into selected topics of biomedical engineering as well as their relationship with physics and physiology. The course provides an overview of the various topics of the different tracks of the biomedical engineering master course and helps orienting the students in selecting their specialized classes and project locations.
ContentIntroduction into neuro- and electrophysiology. Functional analysis of peripheral nerves, muscles, sensory organs and the central nervous system. Electrograms, evoked potentials. Audiometry, optometry. Functional electrostimulation: Cardiac pacemakers. Function of the heart and the circulatory system, transport and exchange of substances in the human body, pharmacokinetics. Endoscopy, medical television technology. Lithotripsy. Electrical Safety. Orthopaedic biomechanics. Lung function. Bioinformatics and Bioelectronics. Biomaterials. Biosensors. Microcirculation.Metabolism.
Practical and theoretical exercises in small groups in the laboratory.
Lecture notesIntroduction to Biomedical Engineering
by Enderle, Banchard, and Bronzino

227-0447-00LImage Analysis and Computer Vision Information W6 credits3V + 1UG. Székely, O. Göksel, L. Van Gool
AbstractLight and perception. Digital image formation. Image enhancement and feature extraction. Unitary transformations. Color and texture. Image segmentation and deformable shape matching. Motion extraction and tracking. 3D data extraction. Invariant features. Specific object recognition and object class recognition.
ObjectiveOverview of the most important concepts of image formation, perception and analysis, and Computer Vision. Gaining own experience through practical computer and programming exercises.
ContentThe first part of the course starts off from an overview of existing and emerging applications that need computer vision. It shows that the realm of image processing is no longer restricted to the factory floor, but is entering several fields of our daily life. First it is investigated how the parameters of the electromagnetic waves are related to our perception. Also the interaction of light with matter is considered. The most important hardware components of technical vision systems, such as cameras, optical devices and illumination sources are discussed. The course then turns to the steps that are necessary to arrive at the discrete images that serve as input to algorithms. The next part describes necessary preprocessing steps of image analysis, that enhance image quality and/or detect specific features. Linear and non-linear filters are introduced for that purpose. The course will continue by analyzing procedures allowing to extract additional types of basic information from multiple images, with motion and depth as two important examples. The estimation of image velocities (optical flow) will get due attention and methods for object tracking will be presented. Several techniques are discussed to extract three-dimensional information about objects and scenes. Finally, approaches for the recognition of specific objects as well as object classes will be discussed and analyzed.
Lecture notesCourse material Script, computer demonstrations, exercises and problem solutions
Prerequisites / NoticePrerequisites:
Basic concepts of mathematical analysis and linear algebra. The computer exercises are based on Linux and C.
The course language is English.
227-0965-00LMicro and Nano-Tomography of Biological TissuesW4 credits3GM. Stampanoni, K. S. Mader
AbstractThe lecture introduces the physical and technical know-how of X-ray tomographic microscopy. Several X-ray imaging techniques (absorption-, phase- and darkfield contrast) will be discussed and their use in daily research, in particular biology, is presented. The course discusses the aspects of quantitative evaluation of tomographic data sets like segmentation, morphometry and statistics.
ObjectiveIntroduction to the basic concepts of X-ray tomographic imaging, image analysis and data quantification at the micro and nano scale with particular emphasis on biological applications
ContentSynchrotron-based X-ray micro- and nano-tomography is today a powerful technique for non-destructive, high-resolution investigations of a broad range of materials. The high-brilliance and high-coherence of third generation synchrotron radiation facilities allow quantitative, three-dimensional imaging at the micro and nanometer scale and extend the traditional absorption imaging technique to edge-enhanced and phase-sensitive measurements, which are particularly suited for investigating biological samples.

The lecture includes a general introduction to the principles of tomographic imaging from image formation to image reconstruction. It provides the physical and engineering basics to understand how imaging beamlines at synchrotron facilities work, looks into the recently developed phase contrast methods, and explores the first applications of X-ray nano-tomographic experiments.

The course finally provides the necessary background to understand the quantitative evaluation of tomographic data, from basic image analysis to complex morphometrical computations and 3D visualization, keeping the focus on biomedical applications.
Lecture notesAvailable online
LiteratureWill be indicated during the lecture.
376-1651-00LClinical and Movement BiomechanicsW4 credits3GS.  Lorenzetti, R. List, N. Singh
AbstractMeasurement and modeling of the human movement during daily activities and in a clinical environment.
ObjectiveThe students are able to analyse the human movement from a technical point of view, to process the data and perform modeling with a focus towards clinical application.
ContentThis course includes ethical considerations, measurement techniques, clinical testing, accessing movement data and anysis as well as modeling with regards to human movement.
376-1985-00LTrauma BiomechanicsW4 credits2V + 1UK.‑U. Schmitt, M. H. Muser
AbstractTrauma biomechanics in an interdisciplinary research field investigating the biomechanics of injuries and related subjects such as prevention. The lecture provides an introduction to the basic principles of trauma biomechanics.
ObjectiveIntroduction to the basic principles of trauma biomechanics.
ContentThis lecture serves as an introduction to the field of trauma biomechanics. Emphasis is placed on the interdisciplinary nature of impact biomechanics, which uses the combination of fundamental engineering principles and advanced medical technologies to develop injury prevention measures. Topics include: accident statistics and accident reconstruction, biomechanical response of the human to impact loading, injury mechanisms and injury criteria, test methods (including crash tests), computer simulations using multi-body and finite element modelling techniques, aspects of passive safety of vehicles (focusing on restraint systems and vehicle compatibility). Real world examples mainly from automobile safety are used to augment lecture material.
Lecture notesAvailable via homepage.
LiteratureSchmitt K-U, Niederer P, M. Muser, Walz F: "Trauma Biomechanics - An Introduction to Injury Biomechanics", Springer Verlag
Recommended Elective Courses
These courses are particularly recommended for the Biomechanics track. Please consult your track advisor if you wish to select other subjects.
151-0255-00LEnergy Conversion and Transport in Biosystems
Does not take place this semester.
W4 credits2V + 1UD. Poulikakos, A. Ferrari
AbstractTheory and application of thermodynamics, energy conversion and fluid dynamics in biological systems and biomedicine at the macro scale and the cellular level.
ObjectiveTheory and application of energy conversion at the macro scale and the cellular level. Understanding of the basic features governing fluid transport in the principal fluidic systems of the human body. Connection of characteristics and patterns from other fields of engineering to biofluidics. Heat and mass transport processes within the human body and relation to biomedical technologies.
ContentHeat and mass transfer models for the transport of thermal energy and chemical species in the human body. Physiology, pathology and biomedical intervention based on extreme temperatures (medical radio frequency therapy, tissue freezing and cryotherapy). Introduction to the main fluidic systems of the human body (cardiovascular, cerebrospinal etc.). Description of the functionality of these systems and of analytical experimental and computational techniques for understanding of their operation. Introduction to bioengineering approaches for the treatment of common pathogenic conditions of these systems. Introduction to cell metabolism, cellular energy transport and cellular thermodynamics.
Lecture notesScript as well as additional material in the form of hand-outs will be distributed.
LiteratureLecture notes and references therein.
151-0511-00LMechanics of Nano- and Micro-MaterialsW4 credits2V + 1UC. Daraio
AbstractThe course provides an introduction to the mechanics of nano- and micro-materials and devices, in the quasistatic and dynamic domains. It reviews scale effects in materials, surveys available characterization techniques and describes the effects of surfaces and microscale contacts. Recent applications of nano- and micro-materials in engineering systems will be discussed.
ObjectiveLearn the fundamental mechanical properties of nano- and micro-system. Understand the effects of scales on the response of materials. Explore applications and devices exploiting the response of materials at small scales.
Contentfollows soon
Lecture notesSlides and notes from the course will be provided.
LiteratureRelevant articles and reading materials will be provided. Various books will be recommended pertaining to the topics covered.
Prerequisites / NoticeMechanics I, II, III
151-0524-00LContinuum Mechanics for EngineersW4 credits2V + 1UE. Mazza
AbstractThe lecture deals with constitutive models that are relevant for design and calculation of structures. These include anisotropic linear elsticity, linear viscoelasticity, plasticity, viscoplasticity. Homogenization theories and laminate theory are presented. Theoretical models are complemented by examples of engineering applications and eperiments.
ObjectiveBasic theories for solving continuum mechanics problems of engineering applications, with particular attention to material models.
ContentAnisotrope Elastizität, Linearelastisches und linearviskoses Stoffverhalten, Viskoelastizität, mikro-makro Modellierung, Laminattheorie, Plastizität, Viscoplastizität, Beispiele aus der Ingenieuranwendung, Vergleich mit Experimenten.
Lecture notesyes
151-0604-00LMicrorobotics Information W4 credits3GB. Nelson
AbstractMicrorobotics is an interdisciplinary field that combines aspects of robotics, micro and nanotechnology, biomedical engineering, and materials science. The aim of this course is to expose students to the fundamentals of this emerging field. Throughout the course students are expected to submit assignments. The course concludes with an end-of-semester examination.
ObjectiveThe objective of this course is to expose students to the fundamental aspects of the emerging field of microrobotics. This includes a focus on physical laws that predominate at the microscale, technologies for fabricating small devices, bio-inspired design, and applications of the field.
ContentMain topics of the course include:
- Scaling laws at micro/nano scales
- Electrostatics
- Electromagnetism
- Low Reynolds number flows
- Observation tools
- Materials and fabrication methods
- Applications of biomedical microrobots
Lecture notesThe powerpoint slides presented in the lectures will be made available in hardcopy and as pdf files. Several readings will also be made available electronically.
Prerequisites / NoticeThe lecture will be taught in English.
151-0605-00LNanosystemsW4 credits4GA. Stemmer
AbstractFrom atoms to molecules to condensed matter: characteristic properties of simple nanosystems and how they evolve when moving towards complex ensembles.
Intermolecular forces, their macroscopic manifestations, and ways to control such interactions.
Self-assembly and directed assembly of 2D and 3D structures.
Special emphasis on the emerging field of molecular electronic devices.
ObjectiveFamiliarize students with basic science and engineering principles governing the nano domain.
ContentThe course addresses basic science and engineering principles ruling the nano domain. We particularly work out the links between topics that are traditionally taught separately.

Special emphasis is placed on the emerging field of molecular electronic devices, their working principles, applications, and how they may be assembled.

Topics are treated in 2 blocks:

(I) From Quantum to Continuum
From atoms to molecules to condensed matter: characteristic properties of simple nanosystems and how they evolve when moving towards complex ensembles.

(II) Interaction Forces on the Micro and Nano Scale
Intermolecular forces, their macroscopic manifestations, and ways to control such interactions.
Self-assembly and directed assembly of 2D and 3D structures.
Literature- Kuhn, Hans; Försterling, H.D.: Principles of Physical Chemistry. Understanding Molecules, Molecular Assemblies, Supramolecular Machines. 1999, Wiley, ISBN: 0-471-95902-2
- Chen, Gang: Nanoscale Energy Transport and Conversion. 2005, Oxford University Press, ISBN: 978-0-19-515942-4
- Ouisse, Thierry: Electron Transport in Nanostructures and Mesoscopic Devices. 2008, Wiley, ISBN: 978-1-84821-050-9
- Wolf, Edward L.: Nanophysics and Nanotechnology. 2004, Wiley-VCH, ISBN: 3-527-40407-4

- Israelachvili, Jacob N.: Intermolecular and Surface Forces. 2nd ed., 1992, Academic Press,ISBN: 0-12-375181-0
- Evans, D.F.; Wennerstrom, H.: The Colloidal Domain. Where Physics, Chemistry, Biology, and Technology Meet. Advances in Interfacial Engineering Series. 2nd ed., 1999, Wiley, ISBN: 0-471-24247-0
- Hunter, Robert J.: Foundations of Colloid Science. 2nd ed., 2001, Oxford, ISBN: 0-19-850502-7
Prerequisites / NoticeCourse format:

Lectures: Thursday 10-12, ML F 36

Homework: Mini-Reviews
Students select a paper (list distributed in class) and expand the topic into a Mini-Review that illuminates the particular field beyond the immediate results reported in the paper.
227-2037-00LPhysical Modelling and Simulation Information W5 credits4GC. Hafner, J. Smajic
AbstractPhysical modelling plays an important role in the analysis and design of new structures, especially for micro and nano devices where fabrication and measurement are difficult. After the fundamentals of electromagnetics, mechanics, and thermodynamics, an introduction to the main concepts and most widely used codes for physical modelling is given and commercial codes are applied.
ObjectiveBasic knowledge of the fundamental equations and effects of electromagnetics, mechanics, and thermodynamics. Knowledge of the main concepts of numerical methods for physical modelling and simulation. Ability 1) to select appropriate software, 2) to apply it for solving given problems, 3) to validate the results, 4) to interactively improve the models until sufficiently accurate results are obtained.
ContentSince the fabrication and characterization of micro- and nanostructures is difficult, expensive, and time-consuming, numerical modelling drastically reduced the design process. Although many commercial software packages are available, it is important to know the drawbacks and difficulties of the numerical methods behind them and to be able to validate the results obtained with such packages.
First, an introduction to the fundamental equations and effects of electromagnetics, mechanics, and thermodynamics is given. This is important for understanding the problems to be analyzed and for validating results obtained from software packages. After this, the main concepts of numerical methods and of the most widely used codes for physical modelling are outlined and compared, which is essential for the adequate selection of software for solving given problems. After this, prominent commercial software packages are applied to various types of problems, ranging from electrodynamics to multiphysics. For becoming able to select appropriate software and to validate the results obtained, different commercial software packages will be used and compared during the exercises in form of small projects.
263-5001-00LIntroduction to Finite Elements and Sparse Linear System Solving Information W4 credits2V + 1UP. Arbenz, T. Kaman
AbstractThe finite element (FE) method is the method of choice for (approximately) solving partial differential equations on complicated domains. In the first third of the lecture, we give an introduction to the method. The rest of the lecture will be devoted to methods for solving the large sparse linear systems of equation that a typical for the FE method. We will consider direct and iterative methods.
ObjectiveStudents will know the most important direct and iterative solvers for sparse linear systems. They will be able to determine which solver to choose in particular situations.

(1) Introduction, model problems.

(2) 1D problems. Piecewise polynomials in 1D.

(3) 2D problems. Triangulations. Piecewise polynomials in 2D.

(4) Variational formulations. Galerkin finite element method.

(5) Implementation aspects.


(6) LU and Cholesky decomposition.

(7) Sparse matrices.

(8) Fill-reducing orderings.


(9) Stationary iterative methods, preconditioning.

(10) Preconditioned conjugate gradient method (PCG).

(11) Incomplete factorization preconditioning.

(12) Multigrid preconditioning.

(13) Nonsymmetric problems (GMRES, BiCGstab).

(14) Indefinite problems (SYMMLQ, MINRES).
Literature[1] M. G. Larson, F. Bengzon: The Finite Element Method: Theory, Implementation, and Applications. Springer, Heidelberg, 2013.

[2] H. Elman, D. Sylvester, A. Wathen: Finite elements and fast iterative solvers. OUP, Oxford, 2005.

[3] Y. Saad: Iterative methods for sparse linear systems (2nd ed.). SIAM, Philadelphia, 2003.

[4] T. Davis: Direct Methods for Sparse Linear Systems. SIAM, Philadelphia, 2006.

[5] H.R. Schwarz: Die Methode der finiten Elemente (3rd ed.). Teubner, Stuttgart, 1991.
Prerequisites / NoticePrerequisites: Linear Algebra, Analysis, Computational Science.
The exercises are made with Matlab.
376-1219-00LRehabilitation Engineering II: Rehabilitation of Sensory and Vegetative Functions Information W3 credits2VR. Riener, R. Gassert
AbstractRehab. Engineering is the application of science and technology to ameliorate the handicaps of individuals with disabilities to reintegrate them into society.The goal is to present classical and new rehabilitation engineering principles applied to compensate or enhance motor, sensory, and cognitive deficits. Focus is on the restoration and treatment of the human sensory and vegetative system.
ObjectiveProvide knowledge on the anatomy and physiology of the human sensory system, related dysfunctions and pathologies, and how rehabilitation engineering can provide sensory restoration and substitution.
ContentIntroduction, problem definition, overview
Rehabilitation of visual function
- Anatomy and physiology of the visual sense
- Technical aids (glasses, sensor substitution)
- Retina and cortex implants
Rehabilitation of hearing function
- Anatomy and physiology of the auditory sense
- Hearing aids
- Cochlea Implants
Rehabilitation and use of kinesthetic and tactile function
- Anatomy and physiology of the kinesthetic and tactile sense
- Tactile/haptic displays for motion therapy (incl. electrical stimulation)
- Role of displays in motor learning
Rehabilitation of vestibular function
- Anatomy and physiology of the vestibular sense
- Rehabilitation strategies and devices (e.g. BrainPort)
Rehabilitation of vegetative Functions
- Cardiac Pacemaker
- Phrenic stimulation, artificial breathing aids
- Bladder stimulation, artificial sphincter
Brain stimulation and recording
- Deep brain stimulation for patients with Parkinson, epilepsy, depression
- Brain-Computer Interfaces
LiteratureIntroductory Books:

An Introduction to Rehabilitation Engineering. R. A. Cooper, H. Ohnabe, D. A. Hobson (Eds.). Taylor & Francis, 2007.

Principles of Neural Science. E. R. Kandel, J. H. Schwartz, T. M Jessell (Eds.). Mc Graw Hill, New York, 2000.

Force and Touch Feedback for Virtual Reality. G. C. Burdea (Ed.). Wiley, New York, 1996 (available on NEBIS).

Human Haptic Perception, Basics and Applications. M. Grunwald (Ed.). Birkhäuser, Basel, 2008.

The Sense of Touch and Its Rendering, Springer Tracts in Advanced Robotics 45, A. Bicchi et al.(Eds). Springer-Verlag Berlin, 2008.

Interaktive und autonome Systeme der Medizintechnik - Funktionswiederherstellung und Organersatz. Herausgeber: J. Werner, Oldenbourg Wissenschaftsverlag 2005.

Neural prostheses - replacing motor function after desease or disability. Eds.: R. Stein, H. Peckham, D. Popovic. New York and Oxford: Oxford University Press.

Advances in Rehabilitation Robotics - Human-Friendly Technologies on Movement Assistance and Restoration for People with Disabilities. Eds: Z.Z. Bien, D. Stefanov (Lecture Notes in Control and Information Science, No. 306). Springer Verlag Berlin 2004.

Intelligent Systems and Technologies in Rehabilitation Engineering. Eds: H.N.L. Teodorescu, L.C. Jain (International Series on Computational Intelligence). CRC Press Boca Raton, 2001.

Selected Journal Articles and Web Links:

Abbas, J., Riener, R. (2001) Using mathematical models and advanced control systems techniques to enhance neuroprosthesis function. Neuromodulation 4, pp. 187-195.

Bach-y-Rita P., Tyler M., and Kaczmarek K (2003). Seeing with the brain. International journal of human-computer-interaction, 15(2):285-295.

Burdea, G., Popescu, V., Hentz, V., and Colbert, K. (2000): Virtual reality-based orthopedic telerehabilitation, IEEE Trans. Rehab. Eng., 8, pp. 430-432
Colombo, G., Jörg, M., Schreier, R., Dietz, V. (2000) Treadmill training of paraplegic patients using a robotic orthosis. Journal of Rehabilitation Research and Development, vol. 37, pp. 693-700.

Hayward, V. (2008): A Brief Taxonomy of Tactile Illusions and
Demonstrations That Can Be Done In a Hardware Store. Brain Research Bulletin, Vol 75, No 6, pp 742-752

Krebs, H.I., Hogan, N., Aisen, M.L., Volpe, B.T. (1998): Robot-aided neurorehabilitation, IEEE Trans. Rehab. Eng., 6, pp. 75-87

Levesque. V. (2005). Blindness, technology and haptics. Technical report, McGill University. Available at:

Quintern, J. (1998) Application of functional electrical stimulation in paraplegic patients. NeuroRehabilitation 10, pp. 205-250.

Riener, R., Nef, T., Colombo, G. (2005) Robot-aided neurorehabilitation for the upper extremities. Medical & Biological Engineering & Computing 43(1), pp. 2-10.

Riener, R. (1999) Model-based development of neuroprostheses for paraplegic patients. Royal Philosophical Transactions: Biological Sciences 354, pp. 877-894.

The vOICe.

VideoTact, ForeThought Development, LLC.
Prerequisites / NoticeTarget Group:
Students of higher semesters and PhD students of
- Biomedical Engineering, Robotics, Systems and Control
- Medical Faculty, University of Zurich
Students of other departments, faculties, courses are also welcome
376-1279-00LVirtual Reality in Medicine Restricted registration - show details
Does not take place this semester.
W3 credits2VR. Riener
AbstractVirtual Reality has the potential to support medical training and therapy. This lecture will derive the technical principles of multi-modal (audiovisual, haptic, tactile etc.) input devices, displays and rendering techniques. Examples are presented in the fields of surgical training, intra-operative augmentation, and rehabilitation. The lecture is accompanied by practical courses and excursions.
ObjectiveProvide theoretical and practical knowledge of new principles and applications of multi-modal simulation and interface technologies in medical education, therapy, and rehabilitation.
ContentVirtual Reality has the potential to provide descriptive and practical information for medical training and therapy while relieving the patient and/or the physician. Multi-modal interactions between the user and the virtual environment facilitate the generation of high-fidelity sensory impressions, by using not only visual and auditory modalities, but also kinesthetic, tactile, and even olfactory feedback. On the basis of the existing physiological constraints, this lecture will derive the technical requirements and principles of multi-modal input devices, displays, and rendering techniques. Several examples are presented that are currently being developed or already applied for surgical training, intra-operative augmentation, and rehabilitation. The lecture will be accompanied by several practical courses on graphical and haptic display devices as well as excursions to facilities equipped with large-scale VR equipment.

Target Group:
Students of higher semesters and PhD students of
- Robotics, Systems and Control Master
- Biomedical Engineering/Movement Science and Sport
- Medical Faculty, University of Zurich
Students of other departments, faculties, courses are also welcome!
LiteratureBook: Virtual Reality in Medicine. Riener, Robert; Harders, Matthias; 2012 Springer.
Prerequisites / NoticeThe course language is English.
Basic experience in Information Technology and Computer Science will be of advantage
More details will be announced in the lecture.
376-1714-00LBiocompatible MaterialsW4 credits3GK. Maniura, P. M. Kollmannsberger, J. Möller, M. Zenobi-Wong
AbstractIntroduction to molecules used for biomaterials, molecular interactions between different materials and biological systems (molecules, cells, tissues). The concept of biocompatibility is discussed and important techniques from biomaterials research and development are introduced.
ObjectiveThe class consists of three parts:
1. Introdcution into molecular characteristics of molecules involved in the materials-to-biology interface. Molecular design of biomaterials.
2. The concept of biocompatibility.
3. Introduction into methodology used in biomaterials research and application.
ContentIntroduction into native and polymeric biomaterials used for medical applications. The concepts of biocompatibility, biodegradation and the consequences of degradation products are discussed on the molecular level. Different classes of materials with respect to potential applications in tissue engineering and drug delivery are introduced. Strong focus lies on the molecular interactions between materials having very different bulk and/or surface chemistry with living cells, tissues and organs. In particular the interface between the materials surfaces and the eukaryotic cell surface and possible reactions of the cells with an implant material are elucidated. Techniques to design, produce and characterize materials in vitro as well as in vivo analysis of implanted and explanted materials are discussed.
In addition, a link between academic research and industrial entrepreneurship is established by external guest speakers.
Lecture notesHandouts can be accessed online.
Biomaterials Science: An Introduction to Materials in Medicine, Ratner B.D. et al, 3rd Edition, 2013
Comprehensive Biomaterials, Ducheyne P. et al., 1st Edition, 2011

(available online via ETH library)

Handouts provided during the classes and references therin.
376-1351-00LMicro/Nanotechnology and Microfluidics for Biomedical ApplicationsW2 credits2VE. Delamarche
AbstractThis course is an introduction to techniques in micro/nanotechnology and to microfluidics. It reviews how many familiar devices are built and can be used for research and biomedical applications. Transistors for DNA sequencing, beamers for patterning proteins, hard-disk technology for biosensing and scanning microfluidics for analyzing tissue sections are just a few examples of the covered topics.
ObjectiveThe main objective of the course is to introduce micro/nanotechnology and microfluidics to students having a background in the life sciences. The course should familiarize the students with the techniques used in micro/nanotechnology and show them how micro/nanotechnology pervades throughout life sciences. Microfluidics will be emphasized due to their increasing importance in research and medical applications. The second objective is to have life students less intimidated by micro/nanotechnology and make them able to link instruments and techniques to specific problems that they might have in their projects/studies. This will also help students getting access to the ETHZ/IBM Nanotech Center infrastructure if needed.
ContentMostly formal lectures (2 × 45 min), with a 2 hour visit and introduction to cleanroom and micro/nanotechnology instruments, last 3 sessions would be dedicated to the presentation and evaluation of projects by students (3 students per team).
Prerequisites / NoticeNanotech center and lab visit at IBM would be mandatory, as well as attending the student project presentations.
376-1720-00LApplication of MATLAB in the Human Movement Sciences Information W2 credits2GR.  van de Langenberg
AbstractStudents will learn to import, process and graphically present experimental data using the MATLAB computing environment. Both the data and the methods of analysis will be typical for experiments in Human Movement Science (i.e. kinematics, kinetics and electromyography).
ObjectiveStudents will acquire the ability to independently load, plot, and process kinematic, kinetic and electromyographical data using the MATLAB computing environment.
ContentDrawbacks of Excel; Possibilities in MATLAB; Import of several data formats; Plot of one and more signals; Removing of an offset and filtering of data based on self-written functions; Normalisation and parametrisation of data; Reliability; Interpolation, Differentiation and Integration in MATLAB.
LiteratureDuring the lecture, several electronically available MATLAB introductions are indicated. Course-specific scripts will be provided by the lecturer.
Prerequisites / NoticeA Laptop with MATLAB installed (v2009 or higher) and wireless internet access is mandatory. Two students can share a laptop if necessary. A MATLAB student version can be obtained at Stud-IDES for free.
376-1974-00LColloquium in Biomechanics Information W2 credits2KB. Helgason, S. J. Ferguson, R. Müller, J. G. Snedeker, B. Taylor, M. Zenobi-Wong
AbstractCurrent topics in biomechanics presented by speakers from academia and industry.
ObjectiveGetting insight into actual areas and problems of biomechanics.
376-2017-00LBiomechanics of Sports Injuries and RehabilitationW3 credits2VK.‑U. Schmitt, J. Goldhahn
AbstractThis lectures introduces the basic principles of injury mechanics and rehabilitation focussing on sports injuries.
ObjectiveWithin the scope of this lecture you will learn the basic principles of trauma biomechanics. Based on examples from sports, you will get to know different mechanisms that can possibly result in injury. Investigating the background and cause of injury should allow you to assess the injury risk for sports activities. Furthermore you should be able to develop measures to prevent such injury.
ContentThis lecture deals with the basic principles of injury mechanics and rehabilitation. Mechanisms that can result in injury are presented. Furthermore possibilities to prevent injuries are discussed. Thereby the lecture focuses on sports injuries.
Lecture notesHandouts can be downloaded.
LiteratureSchmitt K-U, Niederer P, M. Muser, Walz F: "Trauma Biomechanics - Accidental Injury in traffic and sports", Springer Verlag
Prerequisites / NoticeA course work is required. The mark of this course work contributes to the final credits for this lecture. Details will be given during the first lecture.
  •  Page  1  of  2 Next page Last page     All