Suchergebnis: Lehrveranstaltungen im Frühjahrssemester 2017

Maschineningenieurwissenschaften Bachelor Information
6. Semester
Fokus-Projekt
Fokus-Projekte in Mechatronics
NummerTitelTypECTSUmfangDozierende
151-0073-11LAmphibious Robot
Voraussetzung: Besuch der Lerneinheit 151-0073-10L Amphibious Robot im HS16.
W14 KP15A
151-0073-11 AAmphibious Robot210s Std.R. Siegwart
151-0073-31LRobo-Racer
Voraussetzung: Besuch der Lerneinheit 151-0073-30L Robo-Racer im HS16.
W14 KP15A
151-0073-31 ARobo-Racer210s Std.R. Siegwart, M. Hutter
151-0073-41LAdaptive Helicopter Landing Gear
Voraussetzung: Besuch der Lerneinheit 151-0073-40L Adaptive Helicopter Landing Gear im HS16.
W14 KP15A
151-0073-41 AAdaptive Helicopter Landing Gear210s Std.M. Hutter
Fokus-Projekte in Produktionstechnik
NummerTitelTypECTSUmfangDozierende
151-0075-11LSUNCAR - iRoadster - Chassis
Voraussetzung: Besuch der Lerneinheit 151-0075-10L SUNCAR - iRoadster - Chassis im HS16.
W14 KP15A
151-0075-11 ASUNCAR - iRoadster - Chassis210s Std.K. Wegener
151-0075-21LFormula Student Electric - Chassis und Fahrwerk
Voraussetzung: Besuch der Lerneinheit 151-0075-20L Formula Student Electric - Chassis und Fahrwerk im HS16.
W14 KP15A
151-0075-21 AFormula Student Electric - Chassis und Fahrwerk210s Std.P. Hora
151-0075-31LSUNCAR - iRoadster - Antrieb
Voraussetzung: Besuch der Lerneinheit 151-0075-30L SUNCAR - iRoadster - Antrieb im HS16.
W14 KP15A
151-0075-31 ASUNCAR - iRoadster - Antrieb210s Std.K. Wegener
151-0075-41LFormula Student Electric - Antriebsstrang
Voraussetzung: Besuch der Lerneinheit 151-0075-40L Formula Student - Antriebsstrang im HS16.
W14 KP15A
151-0075-41 AFormula Student Electric - Antriebsstrang210s Std.P. Hora
Fokus-Projekte in Design, Mechanics and Materials
NummerTitelTypECTSUmfangDozierende
151-0079-21LSeatCase - An Innovative Airline Seat
Voraussetzung: Besuch der Lerneinheit 151-0079-20L SeatCase - An Innovative Airline Seat im HS16.
W14 KP15A
151-0079-21 ASeatCase - An Innovative Airline Seat210s Std.P. Ermanni
151-0079-31LAirborne Wind Energy System
Voraussetzung: Besuch der Lerneinheit 151-0079-30L Airborne Wind Energy System im HS16.
W14 KP15A
151-0079-31 AAirborne Wind Energy System210s Std.P. Ermanni
151-0079-41LCFLF System: Free Form 3D Printing of Fibre Composite Structures
Voraussetzung: Besuch der Lerneinheit 151-0079-40L CFLF System: Free Form 3D Printing of Fibre Composite Structures im HS16.
W14 KP15A
151-0079-41 ACFLF System: Free Form 3D Printing of Fibre Composite Structures210s Std.P. Ermanni
151-0079-51LSkinfactory BioReactor Belegung eingeschränkt - Details anzeigen
Voraussetzung: Besuch der Lerneinheit 151-0079-52L Skinfactory BioReactor im HS16.
W14 KP15A
151-0079-51 ASkinfactory BioReactor210s Std.M. Meboldt
Wählbare Fächer Fokus-Projekte
NummerTitelTypECTSUmfangDozierende
151-0662-00LProgramming for Robotics - Introduction to ROS Belegung eingeschränkt - Details anzeigen
Number of participants limited to 70.

This course targets senior Bachelor students as well as Master students focusing on Robotics, Systems, and Control. Priority is given to people conducting a project work in the field.
W1 KP2G
151-0662-00 GProgramming for Robotics - Introduction to ROS30s Std.
20.02.08:15-12:00HG G 1 »
23.02.08:15-12:00HG G 1 »
24.02.08:15-12:00HG G 1 »
27.02.08:15-12:00HG G 1 »
02.03.08:15-12:00HG G 1 »
M. Hutter
151-3204-00LCoaching, Koordination und Organisation von Innovations-ProjektenW4 KP4V
151-3204-00 VCoaching, Koordination und Organisation von Innovations-Projekten
Die Auftaktveranstaltung findet am 20.02.2017 von 8.30-17.00 Uhr statt.
4 Std.
Mo15:15-18:00CAB G 56 »
20.02.08:15-17:00LEO B 8.1 »
I. Goller, R. P. Haas, M. Meboldt
Fokus-Vertiefung
Energy, Flows and Processes
Fokus-Koordinator: Prof. Christoph Müller
Für die erforderlichen 20 KP der Fokus-Vertiefung Energy, Flows and Processes müssen mindestens 2 der 4 obligatorischen Fächer (HS/FS) und mindestens 2 der wählbaren Fächer (HS/FS) gewählt werden. 1 Kurs kann frei aus dem gesamten Angebot aller D-MAVT Studiengänge (Bachelor und Master) gewählt werden.
Obligatorische Fächer
NummerTitelTypECTSUmfangDozierende
151-0208-00LBerechnungsmethoden der Energie- und VerfahrenstechnikW+4 KP2V + 2U
151-0208-00 VBerechnungsmethoden der Energie- und Verfahrenstechnik2 Std.
Mi08:15-10:00HG D 1.2 »
P. Jenny
151-0208-00 UBerechnungsmethoden der Energie- und Verfahrenstechnik2 Std.
Mi10:15-12:00HG D 1.2 »
P. Jenny
151-0942-00LIntroduction to Chemical EngineeringW+4 KP3G
151-0942-00 GIntroduction to Chemical Engineering
The course starts in the 2nd week of the Semester.
3 Std.
Mo15:15-18:00HG F 3 »
M. Mazzotti
Wählbare Fächer
NummerTitelTypECTSUmfangDozierende
151-0054-00LWärmeaustausch: Gestaltung und Optimierung Belegung eingeschränkt - Details anzeigen
Der Kurs wird im FS 2017 zum letzten Mal angeboten.

Voraussetzung:
Thermodynamik I (151-0051-00L) ,
Thermodynamik II (151-0052-00L) und
Thermodynamik III (151-0261-00L)
W4 KP2V + 2U
151-0054-00 VWärmeaustausch: Gestaltung und Optimierung Für Fachstudierende und Hörer/-innen ist eine Spezialbewilligung der Dozierenden notwendig.2 Std.
Mo10:15-12:00ML F 39 »
P. Rudolf von Rohr
151-0054-00 UWärmeaustausch: Gestaltung und Optimierung2 Std.
Mo13:15-15:00ML F 39 »
P. Rudolf von Rohr
151-0206-00LEnergy Systems and Power EngineeringW4 KP2V + 2U
151-0206-00 VEnergy Systems and Power Engineering2 Std.
Di10:15-12:00ML H 44 »
R. S. Abhari, A. Steinfeld
151-0206-00 UEnergy Systems and Power Engineering
Die Übungen finden ab der 2. Semesterwoche statt.
2 Std.
Di12:15-14:00ML F 36 »
12:15-14:00ML H 44 »
R. S. Abhari, A. Steinfeld
151-0966-00LIntroduction to Quantum Mechanics for EngineersW4 KP2V + 2U
151-0966-00 VIntroduction to Quantum Mechanics for Engineers2 Std.
Mi10:15-12:00HG E 5 »
D. J. Norris
151-0966-00 UIntroduction to Quantum Mechanics for Engineers
The exercise will start in the 2nd week of the Semester.
2 Std.
Mi13:15-15:00IFW A 36 »
13:15-15:00LFW E 15 »
Do08:15-10:00CHN C 14 »
08:15-10:00NO C 6 »
D. J. Norris
151-0135-00LErgänzendes Projekt für die Fokus-Vertiefung Belegung eingeschränkt - Details anzeigen
Nur für D-MAVT Bachelor-Studierende der Fokusvertiefung.
Für die Belegung der Lerneinheit kontaktieren Sie bitte die D-MAVT Studienadministration.
W1 KP2A
151-0135-00 AErgänzendes Projekt für die Fokus-Vertiefung Für Fachstudierende und Hörer/-innen ist eine Spezialbewilligung der Dozierenden notwendig.30s Std.n. V.Professor/innen
Mechatronics
Fokus-Koordinator: Prof. Bradley Nelson
Für die erforderlichen 20 KP der Fokus-Vertiefung Mechatronics ist 151-0640-00L Studies on Mechatronics obligatorisch.
Obligatorische Fächer
NummerTitelTypECTSUmfangDozierende
151-0640-00LStudies on Mechatronics Information
Zur Auswahl stehen folgende Professoren und bitte kontaktieren Sie den/die Professor/in direkt:
M. Chli, R. D'Andrea, J. Dual, E. Frazzoli, R. Gassert, C. Hierold, M. Hutter, W. Karlen, J. Lygeros, M. Meboldt, B. Nelson, C. Onder, M. Pollefeys, D. Poulikakos, R. Riener, R.Y. Siegwart, L. Thiele, K. Wegener und M. Zeilinger

Dieser Kurs steht für Austauschstudierende nicht zur Verfügung.
O5 KP5A
151-0640-00 AStudies on Mechatronics
Registration and release of the issue after direct contact with the selected professor at the beginning of the semester.
Language: English or German - depending on the lecturer
5 Std.Professor/innen
Wählbare Fächer
NummerTitelTypECTSUmfangDozierende
151-0206-00LEnergy Systems and Power EngineeringW4 KP2V + 2U
151-0206-00 VEnergy Systems and Power Engineering2 Std.
Di10:15-12:00ML H 44 »
R. S. Abhari, A. Steinfeld
151-0206-00 UEnergy Systems and Power Engineering
Die Übungen finden ab der 2. Semesterwoche statt.
2 Std.
Di12:15-14:00ML F 36 »
12:15-14:00ML H 44 »
R. S. Abhari, A. Steinfeld
151-0516-00LNicht-glatte DynamikW5 KP5G
151-0516-00 GNicht-glatte Dynamik5 Std.
Mo12:15-14:00HG E 1.1 »
Di09:15-10:00ML F 34 »
12:15-14:00HG E 1.1 »
C. Glocker
151-0540-00LExperimentelle Mechanik Information W4 KP2V + 1U
151-0540-00 VExperimentelle Mechanik2 Std.
Fr10:15-12:00ML F 39 »
J. Dual
151-0540-00 UExperimentelle Mechanik1 Std.
Fr12:15-13:00ML F 39 »
J. Dual
151-0630-00LNanorobotics Information W4 KP2V + 1U
151-0630-00 VNanorobotics2 Std.
Di10:15-12:00ML F 36 »
06.06.10:15-12:00ML F 36 »
S. Pané Vidal, B. Nelson
151-0630-00 UNanorobotics1 Std.
Do10:15-11:00CHN C 14 »
S. Pané Vidal, B. Nelson
151-0641-00LIntroduction to Robotics and Mechatronics Information Belegung eingeschränkt - Details anzeigen
Number of participants limited to 60.

Enrollment is only valid through registration on the MSRL Website (Link) and will open on 12 December 2016. Registration per e-mail is no longer accepted!
W4 KP2V + 2U
151-0641-00 VIntroduction to Robotics and Mechatronics
Bewilligung der Dozierenden für alle Studierenden notwendig.
2 Std.
Mo16:15-18:00ML F 38 »
10.04.16:15-18:00ML D 28 »
B. Nelson
151-0641-00 UIntroduction to Robotics and Mechatronics
Bewilligung der Dozierenden für alle Studierenden notwendig.
A choice of four different time slots is arranged for the exercise session in a goup room.
The students will be informed about it during the enrollment process.
2 Std.
29.05.16:15-18:00ML F 36 »
B. Nelson
151-1224-00LÖlhydraulik und PneumatikW4 KP2V + 2U
151-1224-00 VÖlhydraulik und Pneumatik2 Std.
Mi08:15-10:00ML F 39 »
31.05.10:15-13:00IFW A 36 »
J.  Lodewyks, K. Wegener
151-1224-00 UÖlhydraulik und Pneumatik2 Std.
Mi10:15-12:00ML F 39 »
J.  Lodewyks, K. Wegener
227-0124-00LEmbedded Systems Information W6 KP4G
227-0124-00 GEmbedded Systems
Übungen in Gruppen.
4 Std.
Mi13:15-17:00ETF C 1 »
15:15-17:00ETZ D 61.1 »
15:15-17:00ETZ D 61.2 »
17:15-19:00ETZ D 61.1 »
17:15-19:00ETZ D 61.2 »
L. Thiele
227-0516-01LElektrische Antriebssysteme I Information W6 KP4G
227-0516-01 GElektrische Antriebssysteme I4 Std.
Di13:15-17:00ETF E 1 »
P. Steimer, A. Omlin, C. A. Stulz
151-0135-00LErgänzendes Projekt für die Fokus-Vertiefung Belegung eingeschränkt - Details anzeigen
Nur für D-MAVT Bachelor-Studierende der Fokusvertiefung.
Für die Belegung der Lerneinheit kontaktieren Sie bitte die D-MAVT Studienadministration.
W1 KP2A
151-0135-00 AErgänzendes Projekt für die Fokus-Vertiefung Für Fachstudierende und Hörer/-innen ist eine Spezialbewilligung der Dozierenden notwendig.30s Std.n. V.Professor/innen
Mikrosysteme und Nanotechnologie
Fokus-Koordinator: Prof. Christofer Hierold
NummerTitelTypECTSUmfangDozierende
151-0060-00LThermodynamics and Energy Conversion in Micro- and Nanoscale TechnologiesW4 KP2V + 2U
151-0060-00 VThermodynamics and Energy Conversion in Micro- and Nanoscale Technologies2 Std.
Mi13:15-15:00ML F 39 »
T. Schutzius, H. Eghlidi
151-0060-00 UThermodynamics and Energy Conversion in Micro- and Nanoscale Technologies2 Std.
Do09:15-11:00ML F 40 »
24.05.12:15-15:00HG E 23 »
31.05.12:15-15:00HG E 23 »
T. Schutzius, H. Eghlidi
151-0516-00LNicht-glatte DynamikW5 KP5G
151-0516-00 GNicht-glatte Dynamik5 Std.
Mo12:15-14:00HG E 1.1 »
Di09:15-10:00ML F 34 »
12:15-14:00HG E 1.1 »
C. Glocker
151-0540-00LExperimentelle Mechanik Information W4 KP2V + 1U
151-0540-00 VExperimentelle Mechanik2 Std.
Fr10:15-12:00ML F 39 »
J. Dual
151-0540-00 UExperimentelle Mechanik1 Std.
Fr12:15-13:00ML F 39 »
J. Dual
151-0622-00LMeasuring on the Nanometer ScaleW2 KP2G
151-0622-00 GMeasuring on the Nanometer Scale2 Std.
Do10:15-12:00ML F 38 »
A. Stemmer
151-0630-00LNanorobotics Information W4 KP2V + 1U
151-0630-00 VNanorobotics2 Std.
Di10:15-12:00ML F 36 »
06.06.10:15-12:00ML F 36 »
S. Pané Vidal, B. Nelson
151-0630-00 UNanorobotics1 Std.
Do10:15-11:00CHN C 14 »
S. Pané Vidal, B. Nelson
151-0643-00LStudies on Micro and Nano Systems Information
Please contact one of the following professors directly:
J. Dual, C. Hierold, B. Nelson, D. Norris, D. Poulikakos, S.E. Pratsinis and A. Stemmer

This course is not available to incoming exchange students.
W5 KP5A
151-0643-00 AStudies on Micro and Nano Systems5 Std.n. V.Professor/innen
151-0902-00LMicro- and Nanoparticle TechnologyW6 KP2V + 2U
151-0902-00 VMicro- and Nanoparticle Technology2 Std.
Di10:15-12:00CLA E 4 »
S. E. Pratsinis, R. Büchel, M. Eggersdorfer, K. Wegner
151-0902-00 UMicro- and Nanoparticle Technology2 Std.
Mi15:15-17:00CLA E 4 »
K. Wegner, R. Büchel, M. Eggersdorfer
151-0966-00LIntroduction to Quantum Mechanics for EngineersW4 KP2V + 2U
151-0966-00 VIntroduction to Quantum Mechanics for Engineers2 Std.
Mi10:15-12:00HG E 5 »
D. J. Norris
151-0966-00 UIntroduction to Quantum Mechanics for Engineers
The exercise will start in the 2nd week of the Semester.
2 Std.
Mi13:15-15:00IFW A 36 »
13:15-15:00LFW E 15 »
Do08:15-10:00CHN C 14 »
08:15-10:00NO C 6 »
D. J. Norris
151-0135-00LErgänzendes Projekt für die Fokus-Vertiefung Belegung eingeschränkt - Details anzeigen
Nur für D-MAVT Bachelor-Studierende der Fokusvertiefung.
Für die Belegung der Lerneinheit kontaktieren Sie bitte die D-MAVT Studienadministration.
W1 KP2A
151-0135-00 AErgänzendes Projekt für die Fokus-Vertiefung Für Fachstudierende und Hörer/-innen ist eine Spezialbewilligung der Dozierenden notwendig.30s Std.n. V.Professor/innen
Produktionstechnik
Fokus-Koordinator: Prof. Konrad Wegener
Für die erforderlichen 20 KP der Fokus-Vertiefung müssen die 3 obligatorischen Fächer im (HS/FS) absolviert werden. Die zusätzlich benötigten 8KP können mit den wählbaren Fächern (HS/FS) erworben werden.
Obligatorische Fächer
NummerTitelTypECTSUmfangDozierende
151-0720-00LProduktionsmaschinen IO4 KP4G
151-0720-00 GProduktionsmaschinen I4 Std.
Di10:15-12:00ML H 41.1 »
Do10:15-12:00CLA E 4 »
K. Wegener, S. Weikert
Wählbare Fächer
NummerTitelTypECTSUmfangDozierende
151-0304-00LDimensionieren II Information W4 KP4G
151-0304-00 GDimensionieren II
Vorlesung: MI, 8-10
Übungen: MI, 10-12
4 Std.
Mi08:15-10:00ML H 44 »
10:15-12:00HG D 3.1 »
10:15-12:00HG D 5.1 »
10:15-12:00IFW A 34 »
10:15-12:00IFW B 42 »
10:15-12:00IFW C 31 »
10:15-12:00IFW C 33 »
10:15-12:00ML J 34.1 »
10:15-12:00ML J 34.3 »
K. Wegener
151-0306-00LVisualization, Simulation and Interaction - Virtual Reality I Information W+4 KP4G
151-0306-00 GVisualization, Simulation and Interaction - Virtual Reality I
Start in the second week of the Semester.
4 Std.
Do13:15-17:00ML H 44 »
A. Kunz
151-0516-00LNicht-glatte DynamikW+5 KP5G
151-0516-00 GNicht-glatte Dynamik5 Std.
Mo12:15-14:00HG E 1.1 »
Di09:15-10:00ML F 34 »
12:15-14:00HG E 1.1 »
C. Glocker
151-0540-00LExperimentelle Mechanik Information W4 KP2V + 1U
151-0540-00 VExperimentelle Mechanik2 Std.
Fr10:15-12:00ML F 39 »
J. Dual
151-0540-00 UExperimentelle Mechanik1 Std.
Fr12:15-13:00ML F 39 »
J. Dual
151-0630-00LNanorobotics Information W4 KP2V + 1U
151-0630-00 VNanorobotics2 Std.
Di10:15-12:00ML F 36 »
06.06.10:15-12:00ML F 36 »
S. Pané Vidal, B. Nelson
151-0630-00 UNanorobotics1 Std.
Do10:15-11:00CHN C 14 »
S. Pané Vidal, B. Nelson
151-0641-00LIntroduction to Robotics and Mechatronics Information Belegung eingeschränkt - Details anzeigen
Number of participants limited to 60.

Enrollment is only valid through registration on the MSRL Website (Link) and will open on 12 December 2016. Registration per e-mail is no longer accepted!
W4 KP2V + 2U
151-0641-00 VIntroduction to Robotics and Mechatronics
Bewilligung der Dozierenden für alle Studierenden notwendig.
2 Std.
Mo16:15-18:00ML F 38 »
10.04.16:15-18:00ML D 28 »
B. Nelson
151-0641-00 UIntroduction to Robotics and Mechatronics
Bewilligung der Dozierenden für alle Studierenden notwendig.
A choice of four different time slots is arranged for the exercise session in a goup room.
The students will be informed about it during the enrollment process.
2 Std.
29.05.16:15-18:00ML F 36 »
B. Nelson
151-0718-00LQualitätssicherung - WerkstückmesstechnikW+4 KP2V + 2U
151-0718-00 VQualitätssicherung - Werkstückmesstechnik2 Std.
Mo10:15-12:00ML H 34.3 »
16.03.08:15-10:00ML J 37.1 »
23.03.08:15-10:00ML J 37.1 »
27.04.08:15-10:00ML J 37.1 »
A. Günther
151-0718-00 UQualitätssicherung - Werkstückmesstechnik2 Std.
Do10:15-12:00ML H 34.3 »
27.03.08:15-10:00ML H 34.3 »
08.05.08:15-10:00ML H 34.3 »
A. Günther
151-0735-00LDynamic Behavior of Materials and StructuresW4 KP2V + 2U
151-0735-00 VDynamic Behavior of Materials and Structures
Findet dieses Semester nicht statt.
2 Std.D. Mohr
151-0735-00 UDynamic Behavior of Materials and Structures
Findet dieses Semester nicht statt.
2 Std.D. Mohr
151-0802-00LAutomation TechnologyW+4 KP2V + 1U
151-0802-00 VAutomation Technology2 Std.
Mo14:15-16:00LFV E 41 »
H. Wild, K. Wegener
151-0802-00 UAutomation Technology1 Std.
Mo16:15-17:00LFV E 41 »
H. Wild, K. Wegener
151-0834-00LUmformtechnik II - Numerische Simulationsverfahren Information W+4 KP2V + 2U
151-0834-00 VUmformtechnik II - Numerische Simulationsverfahren2 Std.
Do08:15-10:00CLA E 4 »
P. Hora
151-0834-00 UUmformtechnik II - Numerische Simulationsverfahren
Die Übung beginnt in der zweiten Semesterwoche.
2 Std.
Mi14:15-16:00CLA F 2 »
P. Hora
151-0836-00LMethoden der virtuellen Prozessauslegung umformtechnischer Systeme Information W+5 KP2V + 2U
151-0836-00 VMethoden der virtuellen Prozessauslegung umformtechnischer Systeme2 Std.
Mo10:15-12:00CLA E 4 »
P. Hora
151-0836-00 UMethoden der virtuellen Prozessauslegung umformtechnischer Systeme2 Std.
Di15:15-17:00CLA F 2 »
P. Hora
151-0840-00LPrinciples of FEM-Based Optimization and Robustness Analysis Information W+5 KP2V + 2U
151-0840-00 VPrinciples of FEM-Based Optimization and Robustness Analysis2 Std.
Fr08:15-10:00CLA E 4 »
B. Berisha, P. Hora, N. Manopulo
151-0840-00 UPrinciples of FEM-Based Optimization and Robustness Analysis
If required two dates for exercises will be offered.

Bei Bedarf werden zwei Übungstermine angeboten.
2 Std.
Fr10:15-12:00CLA F 2 »
B. Berisha, P. Hora, N. Manopulo
151-1224-00LÖlhydraulik und PneumatikW4 KP2V + 2U
151-1224-00 VÖlhydraulik und Pneumatik2 Std.
Mi08:15-10:00ML F 39 »
31.05.10:15-13:00IFW A 36 »
J.  Lodewyks, K. Wegener
151-1224-00 UÖlhydraulik und Pneumatik2 Std.
Mi10:15-12:00ML F 39 »
J.  Lodewyks, K. Wegener
227-0516-01LElektrische Antriebssysteme I Information W6 KP4G
227-0516-01 GElektrische Antriebssysteme I4 Std.
Di13:15-17:00ETF E 1 »
P. Steimer, A. Omlin, C. A. Stulz
Biomedizinische Technik
Fokus-Koordinator: Prof. Edoardo Mazza
NummerTitelTypECTSUmfangDozierende
151-0540-00LExperimentelle Mechanik Information W4 KP2V + 1U
151-0540-00 VExperimentelle Mechanik2 Std.
Fr10:15-12:00ML F 39 »
J. Dual
151-0540-00 UExperimentelle Mechanik1 Std.
Fr12:15-13:00ML F 39 »
J. Dual
151-0630-00LNanorobotics Information W4 KP2V + 1U
151-0630-00 VNanorobotics2 Std.
Di10:15-12:00ML F 36 »
06.06.10:15-12:00ML F 36 »
S. Pané Vidal, B. Nelson
151-0630-00 UNanorobotics1 Std.
Do10:15-11:00CHN C 14 »
S. Pané Vidal, B. Nelson
151-0641-00LIntroduction to Robotics and Mechatronics Information Belegung eingeschränkt - Details anzeigen
Number of participants limited to 60.

Enrollment is only valid through registration on the MSRL Website (Link) and will open on 12 December 2016. Registration per e-mail is no longer accepted!
W4 KP2V + 2U
151-0641-00 VIntroduction to Robotics and Mechatronics
Bewilligung der Dozierenden für alle Studierenden notwendig.
2 Std.
Mo16:15-18:00ML F 38 »
10.04.16:15-18:00ML D 28 »
B. Nelson
151-0641-00 UIntroduction to Robotics and Mechatronics
Bewilligung der Dozierenden für alle Studierenden notwendig.
A choice of four different time slots is arranged for the exercise session in a goup room.
The students will be informed about it during the enrollment process.
2 Std.
29.05.16:15-18:00ML F 36 »
B. Nelson
151-0980-00LBiofluiddynamicsW4 KP2V + 1U
151-0980-00 VBiofluiddynamics2 Std.
Fr10:15-12:00ML F 34 »
D. Obrist, P. Jenny
151-0980-00 UBiofluiddynamics1 Std.
Fr12:15-13:00ML F 34 »
D. Obrist, P. Jenny
376-0022-00LIntroduction to Biomedical Engineering II Belegung eingeschränkt - Details anzeigen W4 KP3G
376-0022-00 GIntroduction to Biomedical Engineering II Für Fachstudierende und Hörer/-innen ist eine Spezialbewilligung der Dozierenden notwendig.
Vorlesung: 13-15h
Übungen: 15-16h
3 Std.
Di12:45-14:30HIL E 7 »
14:45-15:30HIL D 60.1 »
14:45-15:30HIL E 10.1 »
14:45-15:30HIT F 31.2 »
14:45-15:30HIT F 32 »
P. Christen, R. Müller, R. Riener, J. Vörös
376-0206-00LBiomechanik IIW4 KP3G
376-0206-00 GBiomechanik II
Vorlesung: Di 13-15
3 Std.
Mo07:45-08:30HCI D 4 »
07:45-08:30HCI D 6 »
Di11:45-12:30HCI D 4 »
11:45-12:30HCI J 8 »
12:45-14:30HIL E 4 »
14:45-15:30HCI D 6 »
14:45-15:30HCI H 8.1 »
14:45-16:30HCI D 4 »
Mi10:45-11:30HCI D 4 »
12:45-13:30HCI D 6 »
12:45-13:30HCP E 47.2 »
S. Lorenzetti, R. List, W. R. Taylor
376-0210-00LBiomechatronics
Primär für HST-Studenten ausgelegt.

Die Biomechatronics Vorlesung ist nicht für Studenten geeignet, welche bereits die Vorlesung "Physical Human-Robot Interaction"(376-1504-00L) besucht haben, da sie ähnliche Themen abdeckt.

Matlab Kenntnisse sind vorteilhaft -> online Tutorial Link
W4 KP3G
376-0210-00 GBiomechatronics3 Std.
Mi13:15-16:00HG F 1 »
22.02.13:15-16:00ML E 12 »
01.03.13:15-16:00ML E 12 »
R. Riener, R. Gassert
Management, Technology and Economics
Fokus-Koordintor: Prof. Marko Köthenbürger D-MTEC und Dr. Jost Hamschmidt D-MTEC
NummerTitelTypECTSUmfangDozierende
151-0700-00LFertigungstechnikW4 KP2V + 2U
151-0700-00 VFertigungstechnik
Die Vorlesung beginnt in der zweiten Semesterwoche.
2 Std.
Mi14:15-16:00HG G 3 »
K. Wegener
151-0700-00 UFertigungstechnik
Die Übung beginnt in der zweiten Semesterwoche.
2 Std.
Mi16:15-18:00HG D 1.1 »
16:15-18:00HG D 7.1 »
16:15-18:00HG G 3 »
24.05.16:15-17:00HG D 1.1 »
16:15-17:00HG D 7.1 »
16:15-17:00HG G 3 »
K. Wegener
351-0578-00LEinführung in die Wirtschaftspolitik Belegung eingeschränkt - Details anzeigen
Maximale Teilnehmerzahl: 100
W2 KP2V
351-0578-00 VEinführung in die Wirtschaftspolitik2 Std.
Do13:15-15:00HG E 1.1 »
H. Mikosch
351-0778-00LDiscovering Management
Entry level course in management for BSc, MSc and PHD students at all levels not belonging to D-MTEC.
This course can be complemented with Discovering Management (Excercises) 351-0778-01L.
W3 KP3G
351-0778-00 GDiscovering Management3 Std.
Do08:15-11:00HG G 5 »
B. Clarysse, M. Ambühl, S. Brusoni, L. De Cuyper, E. Fleisch, G. Grote, V. Hoffmann, P. Schönsleben, G. von Krogh, F. von Wangenheim
351-0778-01LDiscovering Management (Exercises)
Complementary exercises for the module Discovering Managment.

Prerequisite: Participation and successful completion of the module Discovering Management (351-0778-00L) is mandatory.
W1 KP1U
351-0778-01 UDiscovering Management (Exercises)
Please refer to the course website for further information on the content, credit conditions and schedule of the lectures:
Link
1 Std.
Do11:15-12:00HG G 5 »
B. Clarysse, M. Bourquin Arnold, L. De Cuyper
363-0302-00LHuman Resource Management: Leading Teams Information
Only for MTEC MAS students: Successful completion of this lecture is mandatory if you wish to enroll in the MAS MTEC course 365-1068-00 Case Studies in HRM Leading Teams in the following spring semester.
W+3 KP2G
363-0302-00 GHuman Resource Management: Leading Teams2 Std.
Mo08:15-10:00ML F 36 »
06.03.08:15-10:00ML F 38 »
08:15-10:00ML F 40 »
13.03.08:15-10:00ML F 38 »
08:15-10:00ML F 39 »
08:15-10:00ML F 40 »
03.04.08:15-10:00ML F 38 »
08:15-10:00ML F 39 »
08:15-10:00ML F 40 »
29.05.08:15-10:00ML F 38 »
08:15-10:00ML F 39 »
08:15-10:00ML F 40 »
G. Grote
363-0302-02LHuman Resource Management: Leading Teams (Additional Cases) Belegung eingeschränkt - Details anzeigen
Nur für Maschineningenieurwissenschaften BSc Fokus MTEC
W+1 KP2A
363-0302-02 AHuman Resource Management: Leading Teams (Additional Cases)
individuell terminierte Projektarbeit mit einzelnen Studentengruppen
25s Std.G. Grote
363-0560-00LFinancial Management Information W3 KP2V
363-0560-00 VFinancial Management2 Std.
Mo10:15-12:00HG E 5 »
J.‑P. Chardonnens
363-0622-00LBasic Management Skills Belegung eingeschränkt - Details anzeigen
Beschränkte Teilnehmerzahl.
W3 KP8G
363-0622-00 GBasic Management Skills
Bewilligung der Dozierenden für alle Studierenden notwendig.
Blockkurs 2 x 5 Tage

Block I: 30.01.-03.02.2017, 9-17 h
Block II: 13.02.-17.02.2017, 9-17 h

where: tba
8 Std.R. Specht
363-1017-00LRisk and Insurance EconomicsW4 KP3V
363-1017-00 VRisk and Insurance Economics
Bi-weekly problem set classes starting mid-March on thursdays from 17-19 h.
3 Std.
Mi17:15-19:00LFW B 1 »
Do17:15-19:00HG D 1.1 »
30.03.17:15-19:00HG D 1.2 »
04.05.17:15-19:00HG D 1.1 »
W. Mimra
363-1031-00LQuantitative Methods in Energy and Environmental EconomicsW4 KP3G
363-1031-00 GQuantitative Methods in Energy and Environmental Economics
Lecture 10:00-12:00, Exercise: 13:00-15:00 (irregular)
3 Std.
Mo10:15-12:00ETZ E 9 »
Di13:15-15:00LEE E 101 »
15.05.12:15-13:00ETZ E 9 »
22.05.09:15-10:00ETZ E 9 »
12:15-13:00ETZ E 9 »
29.05.09:15-10:00ETZ E 9 »
12:15-13:00ETZ E 9 »
S. Rausch, A. L. Martinez Cruz
Design, Mechanics and Materials
Fokus-Koordinatorin: Prof. Kristina Shea
Für die erforderlichen 20 KPs der Fokus-Vertiefung Design, Mechanics and Materials sind alle aufgeführten Fächer frei wählbar. Empfohlene Fächer sind gekennzeichnet. Falls Sie einen Kurs auf Masterlevel besuchen möchten, müssen Sie dafür das Einverständnis des zuständigen Dozenten einholen.
NummerTitelTypECTSUmfangDozierende
151-0304-00LDimensionieren II Information W4 KP4G
151-0304-00 GDimensionieren II
Vorlesung: MI, 8-10
Übungen: MI, 10-12
4 Std.
Mi08:15-10:00ML H 44 »
10:15-12:00HG D 3.1 »
10:15-12:00HG D 5.1 »
10:15-12:00IFW A 34 »
10:15-12:00IFW B 42 »
10:15-12:00IFW C 31 »
10:15-12:00IFW C 33 »
10:15-12:00ML J 34.1 »
10:15-12:00ML J 34.3 »
K. Wegener
151-0306-00LVisualization, Simulation and Interaction - Virtual Reality I Information W4 KP4G
151-0306-00 GVisualization, Simulation and Interaction - Virtual Reality I
Start in the second week of the Semester.
4 Std.
Do13:15-17:00ML H 44 »
A. Kunz
151-0324-00LGL zum Bemessen von Kunststoffbauteilen Information W4 KP2V + 1U
151-0324-00 VGL zum Bemessen von Kunststoffbauteilen2 Std.
Do08:15-10:00HG D 1.1 »
G. P. Terrasi
151-0324-00 UGL zum Bemessen von Kunststoffbauteilen
The date and location of the exercise will be given in the beginning of the Semester.
1 Std.
28.03.14:15-16:00HG F 26.1 »
30.03.10:15-12:00CHN D 44 »
04.04.14:15-16:00HG F 26.1 »
06.04.10:15-12:00CHN D 44 »
11.04.14:15-16:00HG F 26.1 »
16.05.14:15-16:00HG F 26.1 »
18.05.10:15-12:00CHN D 44 »
G. P. Terrasi
151-0332-00LInterdisciplinary Product Development: Definition, Realisation and Validation of Product Concepts
Number of participants limited to: 5 (ETHZ) + 20 (ZHdK)

To apply for the course please create a pdf of 1-2 Pages describing yourself and your motivation for the course as well as one or more of your former development projects. Please add minimum one picture and send the pdf to Link
W+4 KP3G + 2A
151-0332-00 GInterdisciplinary Product Development: Definition, Realisation and Validation of Product Concepts
The course will start in the second week of the semester.
After the first three courses at ETH, eight full-day and six half-day courses will take place at ZHdK. Students will be informed about details on the course dates and times by the lecturer.
3 Std.
02.03.09:15-17:00PFA L 51 »
03.03.09:15-17:00PFA L 51 »
09.03.09:15-17:00PFA L 51 »
M. Schütz, M. Meboldt
151-0332-00 AInterdisciplinary Product Development: Definition, Realisation and Validation of Product Concepts
The course starts in the second week of the semester.
3h of group work to be scheduled on Thursday or Friday by arrangement.
30s Std.M. Schütz, M. Meboldt
151-0361-00LAn Introduction to the Finite-Element Method Information W+4 KP3G
151-0361-00 GAn Introduction to the Finite-Element Method3 Std.
Di14:15-17:00ML H 44 »
G. Kress, C. Thurnherr
151-0516-00LNicht-glatte DynamikW5 KP5G
151-0516-00 GNicht-glatte Dynamik5 Std.
Mo12:15-14:00HG E 1.1 »
Di09:15-10:00ML F 34 »
12:15-14:00HG E 1.1 »
C. Glocker
151-0540-00LExperimentelle Mechanik Information W+4 KP2V + 1U
151-0540-00 VExperimentelle Mechanik2 Std.
Fr10:15-12:00ML F 39 »
J. Dual
151-0540-00 UExperimentelle Mechanik1 Std.
Fr12:15-13:00ML F 39 »
J. Dual
151-0735-00LDynamic Behavior of Materials and StructuresW4 KP2V + 2U
151-0735-00 VDynamic Behavior of Materials and Structures
Findet dieses Semester nicht statt.
2 Std.D. Mohr
151-0735-00 UDynamic Behavior of Materials and Structures
Findet dieses Semester nicht statt.
2 Std.D. Mohr
151-3202-00LEngineering Design Methods Belegung eingeschränkt - Details anzeigen
Maximale Teilnehmerzahl: 30
W+4 KP3G
151-3202-00 GEngineering Design Methods3 Std.
Di09:15-12:00CAB G 56 »
K. Shea, T. Stankovic
151-3204-00LCoaching, Koordination und Organisation von Innovations-ProjektenW4 KP4V
151-3204-00 VCoaching, Koordination und Organisation von Innovations-Projekten
Die Auftaktveranstaltung findet am 20.02.2017 von 8.30-17.00 Uhr statt.
4 Std.
Mo15:15-18:00CAB G 56 »
20.02.08:15-17:00LEO B 8.1 »
I. Goller, R. P. Haas, M. Meboldt
151-3206-00LSystemic Design for SustainabilityW4 KP3G
151-3206-00 GSystemic Design for Sustainability3 Std.
Mi10:15-13:00HG G 26.3 »
T. Luthe
Ingenieur-Tools V
Die Teilnahme an den Ingenieur-Tools-Kursen ist obligatorisch. Bei Abwesenheit werden keine Kreditpunkte gutgeschrieben. Ausnahmen müssen vom Dozenten bewilligt werden.
NummerTitelTypECTSUmfangDozierende
151-0018-10LEngineering Tool V: Simulation of System Failures Belegung eingeschränkt - Details anzeigen
Maximale Teilnehmerzahl: 20

Es darf nur ein Ingenieur-Tool-Kurs pro Semester belegt werden. Die Ingenieur-Tool-Kurse sind ausschliesslich für MAVT-Bachelor-Studierende.
W0.4 KP1K
151-0018-10 KEngineering Tool V: Simulation of System Failures Für Fachstudierende und Hörer/-innen ist eine Spezialbewilligung der Dozierenden notwendig.
This block course will take place on Tuesday, Wednesday and Thursday at 13.00-17.00 in the first week of the Semester. The location of the course will be given before the Semester begins.
Teaching language: German and English
12s Std.
21.02.13:15-17:00ML H 41.2 »
22.02.13:15-17:00HG D 11 »
23.02.13:15-17:00HG D 11 »
P. Probst
151-0024-10LIngenieur-Tool IV/V: Simulationstools der digitalen Automobilfabrik Information Belegung eingeschränkt - Details anzeigen
Maximale Teilnehmerzahl: 25

Es darf nur ein Ingenieur-Tool-Kurs pro Semester belegt werden. Die Ingenieur-Tool-Kurse sind ausschliesslich für MAVT-Bachelor-Studierende.
W0.4 KP1K
151-0024-10 KIngenieur-Tool IV/V: Simulationstools der digitalen Automobilfabrik Für Fachstudierende und Hörer/-innen ist eine Spezialbewilligung der Dozierenden notwendig.
Blockkurs in der ersten Semesterwoche.
12s Std.
21.02.13:15-17:00IFW C 42 »
22.02.13:15-17:00IFW C 42 »
23.02.13:15-17:00IFW C 42 »
P. Hora
151-0026-10LEngineering Tool V: Computing with Fortran Belegung eingeschränkt - Details anzeigen
Maximale Teilnehmerzahl: 30

Es darf nur ein Ingenieur-Tool-Kurs pro Semester belegt werden. Die Ingenieur-Tool-Kurse sind ausschliesslich für MAVT-Bachelor-Studierende.
W0.4 KP1K
151-0026-10 KEngineering Tool V: Computing with Fortran12s Std.
21.02.13:15-17:00CHN G 46 »
22.02.13:15-17:00CHN G 46 »
23.02.13:15-17:00CHN G 46 »
A. Haselbacher
151-0027-10LIngenieur-Tool IV/V: Programmierung mit LabView Belegung eingeschränkt - Details anzeigen
Es darf nur ein Ingenieur-Tool-Kurs pro Semester belegt werden.

Die Ingenieur-Tool-Kurse sind ausschliesslich für MAVT-Bachelor-Studierende.
W0.4 KP1K
151-0027-10 KIngenieur-Tool IV/V: Programmierung mit LabView
Blockkurs in der ersten Semesterwoche
12s Std.
21.02.13:15-17:00ML H 34.1 »
22.02.13:15-17:00ML H 34.1 »
23.02.13:15-17:00ML H 34.1 »
L. Prochazka, T. Rösgen
151-0034-10LIngenieur-Tool V: Einführung in die statistische Versuchsplanung (DOE) Belegung eingeschränkt - Details anzeigen
Maximale Teilnehmerzahl: 36

Es darf nur ein Ingenieur-Tool-Kurs pro Semester belegt werden. Die Ingenieur-Tool-Kurse sind ausschliesslich für MAVT-Bachelor-Studierende.
W0.4 KP1K
151-0034-10 KIngenieur-Tool V: Einführung in die statistische Versuchsplanung (DOE) Für Fachstudierende und Hörer/-innen ist eine Spezialbewilligung der Dozierenden notwendig.
Blockkurs in der ersten Semesterwoche.
12s Std.
21.02.13:15-17:00LFW E 11 »
22.02.13:15-17:00LFW E 11 »
23.02.13:15-17:00LFW E 11 »
B. G. Rüttimann, K. Wegener
151-0055-10LIngenieur-Tool V: Planung menschlicher Arbeit Belegung eingeschränkt - Details anzeigen
Maximale Teilnehmerzahl: 20

Es darf nur ein Ingenieur-Tool-Kurs pro Semester belegt werden. Die Ingenieur-Tool-Kurse sind ausschliesslich für MAVT-Bachelor-Studierende.
W0.4 KP1K
151-0055-10 KIngenieur-Tool V: Planung menschlicher Arbeit Für Fachstudierende und Hörer/-innen ist eine Spezialbewilligung der Dozierenden notwendig.
Der Blockkurs findet am Dienstag, Mittwoch und Donnerstag von 13.00 bis 17.00 in der ersten Semesterwoche im Gruppenraum des Technoparks ZH statt.
12s Std.P. Acél, K. Wegener
151-0057-10LIngenieur-Tool IV/V: Systems Engineering für Projekt- und Studienarbeiten Belegung eingeschränkt - Details anzeigen
Maximale Teilnehmerzahl: 60

Es darf nur ein Ingenieur-Tool-Kurs pro Semester belegt werden. Die Ingenieur-Tool-Kurse sind ausschliesslich für MAVT-Bachelor-Studierende.
W0.4 KP1K
151-0057-10 KIngenieur-Tool IV/V: Systems Engineering für Projekt- und Studienarbeiten Für Fachstudierende und Hörer/-innen ist eine Spezialbewilligung der Dozierenden notwendig.
Der Blockkurs findet in der ersten Semesterwoche statt.
12s Std.
21.02.13:15-17:00ML H 37.1 »
22.02.13:15-17:00ML H 37.1 »
23.02.13:15-17:00ML H 37.1 »
R. Züst, K. Wegener
151-0061-10LIngenieur-Tool lV/V: Wissenschaftliches Arbeiten mit LaTeX und Vektorgraphiken Information Belegung eingeschränkt - Details anzeigen
Maximale Teilnehmerzahl: 40

Es darf nur ein Ingenieur-Tool-Kurs pro Semester belegt werden. Die Ingenieur-Tool-Kurse sind ausschliesslich für MAVT-Bachelor-Studierende.
W0.4 KP1K
151-0061-10 KIngenieur-Tool lV/V: Wissenschaftliches Arbeiten mit LaTeX und Vektorgraphiken Für Fachstudierende und Hörer/-innen ist eine Spezialbewilligung der Dozierenden notwendig.
Blockkurs in der ersten Semesterwoche
Anwesenheitspflicht an allen drei Nachmittagen
12s Std.
21.02.13:15-17:00HG E 23 »
22.02.13:15-17:00HG E 23 »
23.02.13:15-17:00HG E 23 »
R. Gassert
151-0063-10LIngenieur-Tool V: Programmieren mit LabVIEW (für Innovationsprojekt Tutoren) Belegung eingeschränkt - Details anzeigen
Maximale Teilnehmerzahl: 30

Es darf nur ein Ingenieur-Tool-Kurs pro Semester belegt werden. Die Ingenieur-Tool-Kurse sind ausschliesslich für MAVT-Bachelor-Studierende.
W0.4 KP1K
151-0063-10 KIngenieur-Tool V: Programmieren mit LabVIEW (für Innovationsprojekt Tutoren)
Blockkurs in der ersten Semesterwoche.
12s Std.
21.02.13:15-17:00HG G 1 »
22.02.13:15-17:00ML H 41.2 »
23.02.13:15-17:00HG D 12 »
J. Eisenberg, M. Meboldt
151-0068-10LIngenieur-Tool V: Herstellkosten senken und Wertanalyse
Maximale Teilnehmerzahl: 16

Es darf nur ein Ingenieur-Tool-Kurs pro Semester belegt werden. Die Ingenieur-Tool-Kurse sind ausschliesslich für MAVT-Bachelor-Studierende.
W0.4 KP1K
151-0068-10 KIngenieur-Tool V: Herstellkosten senken und Wertanalyse
Blockkurs in der ersten Semesterwoche.
12s Std.
21.02.13:15-17:00LEE E 126 »
22.02.13:15-17:00LEE E 126 »
23.02.13:15-17:00LEE E 126 »
M. Meboldt
151-0069-10LEngineering Tool IV: Design Optimization and CAD Belegung eingeschränkt - Details anzeigen
Die Ingenieur-Tool-Kurse sind ausschliesslich für MAVT-Bachelor-Studierende.

Maximale Teilnehmerzahl: 25

Es darf nur ein Ingenieur-Tool-Kurs pro Semester belegt werden.
W0.4 KP1K
151-0069-10 KEngineering Tool IV: Design Optimization and CAD
Block course during the first week of the semester
12s Std.
21.02.13:15-17:00HG K 30.1 »
22.02.13:15-17:00HG K 30.1 »
23.02.13:15-17:00HG K 30.1 »
K. Shea, T. Stankovic
151-0912-10LIngenieur-Tool V: Patente Belegung eingeschränkt - Details anzeigen
Maximale Teilnehmerzahl: 50

Die Ingenieur-Tool-Kurse sind ausschliesslich für MAVT-Bachelor-Studierende.
Es darf nur ein Ingenieur-Tool-Kurs pro Semester belegt werden.
W0.4 KP1K
151-0912-10 KIngenieur-Tool V: Patente12s Std.
21.02.13:15-17:00CHN E 42 »
22.02.13:15-17:00ML H 41.1 »
23.02.14:15-18:00ML F 39 »
F. Gross