Autumn Semester 2020 takes place in a mixed form of online and classroom teaching.
Please read the published information on the individual courses carefully.

Search result: Courses in Spring Semester 2017

Mechanical Engineering Bachelor Information
2. Semester
First Year Examinations: Compulsory Courses
NumberTitleTypeECTSHoursLecturers
401-0262-G0LAnalysis II Information O8 credits5V + 3U
401-0262-00 VAnalysis II
Vorlesung Mo 8-10, Mi 8-10 (alternierend mit Schnellübungen), Fr 8-10 im HG F 7 mit Videoübertragung im HG F 5.
5 hrs
Mon08-10HG F 5 »
08-10HG F 7 »
Wed/2w08-10HG F 5 »
08-10HG F 7 »
Fri08-10HG F 5 »
08-10HG F 7 »
26.05.10-12HG E 33.1 »
A. Steiger
401-0262-00 UAnalysis II
Übungen (Beginn in der 2. Semesterwoche)
Fr 10-12 (und mit Lineare Algebra II Übungen Fr 12-13) oder Fr 13-15 (und mit Lineare Algebra II Übungen Fr 15-16) gemäss Gruppeneinteilung.
2 hrs
Fri10-12CAB G 52 »
10-12HG D 1.1 »
10-12HG D 7.1 »
10-12HG D 7.2 »
10-12HG F 26.3 »
10-12HG F 26.5 »
10-12HG G 26.3 »
10-12LEE D 101 »
10-12ML F 38 »
10-12ML F 40 »
10-12ML H 41.1 »
13-15HG D 1.1 »
13-15HG D 7.2 »
13-15HG E 21 »
13-15HG E 22 »
13-15HG F 26.3 »
13-15HG G 26.3 »
13-15HG G 26.5 »
13-15LEE C 114 »
13-15LEE D 101 »
13-15LEE D 105 »
13-15ML F 34 »
13-15ML H 41.1 »
01.06.13-15HG F 26.5 »
A. Steiger
401-0262-10 UAnalysis II (Schnellübungen)
Schnellübungen Mi 8-10 (alternierend mit der Vorlesung)
1 hrs
Wed/2w08-10CAB G 51 »
08-10CHN C 14 »
08-10CHN E 46 »
08-10ETZ E 6 »
08-10ETZ E 8 »
08-10HG D 1.1 »
08-10HG E 22 »
08-10HG F 5 »
08-10IFW A 32.1 »
08-10IFW A 36 »
08-10ML F 34 »
08-10NO C 6 »
08-10NO C 60 »
A. Steiger
401-0172-00LLinear Algebra IIO3 credits2V + 1U
401-0172-00 VLineare Algebra II
Die Vorlesung wird doppelt angeboten: Do 13-15 und Fr 10-12 (gemäss Gruppeneinteilung).
In der Karwoche findet die Vorlesung für alle am Donnerstag statt: 13.04.2017 13-15 im HG F 1 mit Videoübertragung im HG F 3.
Am 26.05.2017 (Freitag nach Auffahrt) findet keine Vorlesung statt.
2 hrs
Thu13-15HG F 1 »
Fri10-12HG G 3 »
13.04.13-15HG F 3 »
N. Hungerbühler
401-0172-00 ULineare Algebra II
Fr 12-13 (und mit Analysis II Übungen Fr 10-12) oder Fr 15-16 (und mit Analysis II Übungen Fr 13-15) gemäss Gruppeneinteilung.
Wegen des Blockkurses Ingenieur-Tool I finden am 24.02.2017 nur Übungen 12-13 statt (je ca. anderthalb bis drei Gruppen zusammen im gleichen Raum; Details gemäss Ankündigung der Übungsgruppenorganisation).
1 hrs
Fri12-13CAB G 52 »
12-13HG D 1.1 »
12-13HG D 7.1 »
12-13HG D 7.2 »
12-13HG F 26.3 »
12-13HG F 26.5 »
12-13HG G 26.5 »
12-13LEE D 101 »
12-13ML F 38 »
12-13ML F 40 »
12-13ML H 41.1 »
15-16HG D 1.1 »
15-16HG D 7.2 »
15-16HG E 21 »
15-16HG E 22 »
15-16HG F 26.3 »
15-16HG G 26.5 »
15-16LEE C 114 »
15-16LEE D 101 »
15-16LEE D 105 »
15-16ML F 34 »
15-16ML H 41.1 »
N. Hungerbühler
151-0502-00LMechanics 2: Deformable Solids and Structures
Prerequisite: 151-0501-00L Mechanics 1: Kinematics and Statics

This course is only for students of Mechanical Engineering, Civil Engineering and Human Movement Sciences.

Students in Human Movement Sciences and Sport must enrol in "Mechanics 1" and "Mechanics 2" as a yearly course.
O6 credits4V + 2U
151-0502-00 VMechanik 2: Deformierbare Körper
Vorlesung Mo 10-12 und Mi 10-12 im HG F 7 mit Videoübertragung im HG F 3 und F 5.
4 hrs
Mon10-12HG F 3 »
10-12HG F 5 »
10-12HG F 7 »
Wed10-12HG F 3 »
10-12HG F 5 »
10-12HG F 7 »
D. Mohr
151-0502-00 UMechanik 2: Deformierbare Körper
Die Übungen finden ab der 2. Semesterwoche statt.

Di 08-10 für Maschineningenieurwissenschaften und Bewegungswissenschaften
Mi 13-15 und 15-17 für Bauingenieurwissenschaften
2 hrs
Tue08-10CAB G 11 »
08-10ETF C 1 »
08-10ETF E 1 »
08-10HG D 1.2 »
08-10HG D 7.1 »
08-10HG E 1.1 »
08-10HG E 1.2 »
08-10HG E 5 »
08-10HG F 3 »
08-10IFW A 32.1 »
08-10IFW A 36 »
08-10IFW B 42 »
08-10LEE C 104 »
08-10LEE C 114 »
08-10LEE D 101 »
08-10LEE D 105 »
08-10ML F 36 »
08-10ML F 38 »
08-10NO C 60 »
08-10RZ F 21 »
10-12HG G 26.1 »
Wed13-15CHN E 46 »
13-15ETZ F 91 »
13-15ML J 34.3 »
13-15NO C 6 »
15-17ETZ G 91 »
15-17HG D 3.3 »
15-17HG D 5.1 »
15-17HG F 26.1 »
15-17LEE C 104 »
15-17LFW E 11 »
04.04.10-12HG F 26.1 »
D. Mohr
151-0712-00LEngineering Materials and Production IIO4 credits2V + 2U
151-0712-00 VWerkstoffe und Fertigung II
Vorlesung im HG F 7 mit Videoübertragung im HG F 5.
ACHTUNG: Wegen des Blockkurses Ingenieur-Tool I finden Vorlesung nur am Donnerstag 23.02.2017 in der ersten Semesterwoche statt.
2 hrs
Tue13-14HG F 5 »
13-14HG F 7 »
Thu08-10HG F 5 »
08-10HG F 7 »
K. Wegener
151-0712-00 UWerkstoffe und Fertigung II
in Gruppen, 14-täglich, nach Vereinbarung
Die Übungen beginnen in der zweiten Semesterwoche.
2 hrs
Mon12-13ML J 34.3 »
13-15CAB G 59 »
13-15CHN E 42 »
13-15HG E 33.1 »
13-15LFW C 5 »
13-15LFW E 13 »
13-15ML H 41.1 »
15-17LEE D 101 »
15-17ML F 34 »
Tue12-13HG D 3.1 »
14-16CAB G 61 »
14-16ETZ E 6 »
14-16HG D 7.2 »
14-16IFW B 42 »
Wed13-15ETZ E 7 »
22.02.12-13CAB G 57 »
K. Wegener
151-0302-00LInnovation ProcessO2 credits1V + 1U
151-0302-00 VInnovationsprozess
Vorlesung im HG F 1 mit Videoübertragung im HG F3.
1 hrs
Tue10-11HG F 1 »
10-11HG F 3 »
M. Meboldt, Q. Lohmeyer
151-0302-00 UInnovationsprozess
Vorlesung im HG F 1 mit Videoübertragung im HG F3.
1 hrs
Tue11-12HG F 1 »
11-12HG F 3 »
M. Meboldt, Q. Lohmeyer
252-0832-00LInformatics Information O4 credits2V + 2U
252-0832-00 VInformatik
Vorlesung im HG F 7 mit Videoübertragung im HG F 5.
2 hrs
Thu10-12HG F 5 »
10-12HG F 7 »
M. Gross, H. Lehner
252-0832-00 UInformatik
Die Übungen beginnen in der zweiten Semesterwoche.
2 hrs
Tue14-16IFW A 32.1 »
Wed13-15ETZ G 91 »
13-15ETZ H 91 »
13-15ETZ K 91 »
13-15HG D 7.1 »
13-15HG D 7.2 »
13-15IFW A 32.1 »
13-15IFW C 31 »
13-15LEE D 101 »
13-15LEE D 105 »
13-15ML F 34 »
13-15ML H 41.1 »
13-15ML H 43 »
13-15ML J 34.1 »
13-15ML J 37.1 »
13-15NO D 11 »
13-15NO E 39 »
15-17ETZ K 91 »
15-17HG D 7.2 »
15-17IFW C 31 »
15-17LEE D 101 »
15-17LEE D 105 »
15-17ML H 41.1 »
15-17ML J 37.1 »
M. Gross, H. Lehner
Additional First Year Courses
NumberTitleTypeECTSHoursLecturers
151-0300-00LInnovation ProjectO2 credits2U
151-0300-00 UInnovationsprojekt
Eine Einführungsveranstaltung für Innovationsprojekt findet am Di 21. Februar 2017 von 12.00 bis 12.20 Uhr im HG F 1 mit Videoübertragung im HG F3 statt.

Das Innovationsprojekt startet in der zweiten Semesterwoche.

Die Gruppeneinteilung, der Zeitplan und weitere organisatorische Informationen werden während der Infoveranstaltung in der 1. Semesterwoche bekannt gegeben.
2 hrs
Tue14-15HG G 1 »
15-16HG G 1 »
16-17HG G 1 »
Wed15-16HG G 1 »
16-17HG G 1 »
17-18HG G 1 »
Thu15-16HG G 1 »
16-17HG G 1 »
17-18HG G 1 »
21.02.12-13HG F 1 »
12-13HG F 3 »
M. Meboldt
Engineering Tool I
The participation at the Engineering Tools course is mandatory. If you miss any classes, no credit points will be awarded. For exemptions you have to contact the lecturer of the course.
NumberTitleTypeECTSHoursLecturers
151-0040-01LEngineering Tool I: Computer-Based Mathematics Information Restricted registration - show details
The Engineering Tool course is for MAVT-Bachelor students only.
O0.4 credits1K
151-0040-01 KIngenieur-Tool I: Rechnergestützte Mathematik Special students and auditors need a special permission from the lecturers.
Blockkurs in der ersten Semesterwoche:
- Vorlesung im HCI G 3 mit Videoübertragung im G 7
- Vorlesung im HG F 1 mit Videoübertragung im HG F 3
12s hrs
20.02.14-18HCI G 3 »
14-18HCI G 7 »
21.02.14-18HCI G 3 »
14-18HCI G 7 »
24.02.13-17HG F 1 »
13-17HG F 3 »
S. P. Kaufmann, J. Dual
4. Semester
Compulsory Courses
Examination Block 2
NumberTitleTypeECTSHoursLecturers
402-0034-10LPhysics IIO4 credits2V + 2U
402-0034-10 VPhysik II
Beginn in der zweiten Semesterwoche
2 hrs
Thu13-15HPH G 1 »
W. Wegscheider
402-0034-10 UPhysik II
Beginn in der zweiten Semesterwoche
Do 15-17 für Studiengang Maschineningenieurwissenschaften
Do 16-18 für Studiengang Rechnergestützte Wissenschaften
2 hrs
Thu15-17HCI D 2 »
15-17HCI J 6 »
15-17HIL D 10.2 »
15-17HIL E 5 »
15-17HIL E 6 »
15-17HIL E 7 »
15-17HIL E 8 »
15-17HIT F 12 »
15-17HIT F 31.2 »
15-17HIT J 52 »
15-17HIT J 53 »
16-18HIT J 51 »
W. Wegscheider
227-0075-00LElectrical Engineering I Information O3 credits2V + 2U
227-0075-00 VElektrotechnik I
Vorlesung im ML D 28 mit Videoübertragung im ML E 12.
2 hrs
Mon10-12ML D 28 »
10-12ML E 12 »
J. Biela
227-0075-00 UElektrotechnik I
Die Übungen zu "Elektrotechnik I" werden infolge MAVT-Ingenieur Tool-Kurse erst in der 2. Semesterwoche beginnen.
2 hrs
Tue16-18CHN E 42 »
16-18CLA E 4 »
16-18ETZ E 6 »
16-18ETZ G 91 »
16-18ETZ K 91 »
16-18HG D 5.1 »
16-18HG D 5.3 »
16-18HG D 7.1 »
16-18HG G 26.1 »
16-18IFW A 34 »
16-18IFW B 42 »
16-18IFW C 31 »
16-18ML H 41.1 »
16-18ML H 43 »
J. Biela
151-0102-00LFluid Dynamics IO6 credits4V + 2U
151-0102-00 VFluiddynamik I
Vorlesung:
Mo 13-15 im HG F 1 mit Videoübertragung im HG F 3
Mi 13-14 im HG F 7
Do 08-09 im NO C 60
Fr 13-15 im HG F 7 mit Videoübertragung im HG F 5
4 hrs
Mon13-15HG F 1 »
13-15HG F 3 »
Wed13-14HG F 7 »
Thu08-09NO C 60 »
Fri13-15HG F 5 »
13-15HG F 7 »
20.02.13-15HG F 1 »
13-15HG F 3 »
24.02.13-15HG F 5 »
13-15HG F 7 »
T. Rösgen
151-0102-00 UFluiddynamik I
Die Übungen finden ab der zweiten Semesterwoche statt.
2 hrs
Mon08-10HG D 1.2 »
08-10HG D 7.1 »
08-10HG E 1.1 »
08-10HG E 1.2 »
08-10HG E 33.5 »
08-10ML H 44 »
T. Rösgen
151-0052-00LThermodynamics II Information O4 credits2V + 2U
151-0052-00 VThermodynamik II
Vorlesung im ML D 28 mit Videoübertragung im ML E 12
2 hrs
Tue08-10ML D 28 »
08-10ML E 12 »
I. Karlin, H. G. Park
151-0052-00 UThermodynamik II
Die Übungen beginnen erst in der dritten Semesterwoche.
2 hrs
Tue13-15CHN C 14 »
13-15CHN D 44 »
13-15ETZ H 91 »
13-15HG D 1.1 »
13-15IFW A 36 »
13-15LFW E 13 »
13-15ML F 38 »
13-15ML F 39 »
I. Karlin, H. G. Park
Electives
NumberTitleTypeECTSHoursLecturers
151-0700-00LManufacturingW4 credits2V + 2U
151-0700-00 VFertigungstechnik
Die Vorlesung beginnt in der zweiten Semesterwoche.
2 hrs
Wed14-16HG G 3 »
K. Wegener
151-0700-00 UFertigungstechnik
Die Übung beginnt in der zweiten Semesterwoche.
2 hrs
Wed16-18HG D 1.1 »
16-18HG D 7.1 »
16-18HG G 3 »
24.05.16-17HG D 1.1 »
16-17HG D 7.1 »
16-17HG G 3 »
K. Wegener
151-0304-00LEngineering Design II Information W4 credits4G
151-0304-00 GDimensionieren II
Vorlesung: MI, 8-10
Übungen: MI, 10-12
4 hrs
Wed08-10ML H 44 »
10-12HG D 3.1 »
10-12HG D 5.1 »
10-12IFW A 34 »
10-12IFW B 42 »
10-12IFW C 31 »
10-12IFW C 33 »
10-12ML J 34.1 »
10-12ML J 34.3 »
K. Wegener
151-0590-00LControl Systems II Information W4 credits2V + 2U
151-0590-00 VControl Systems II
Vorlesung Fri 08-10 im ML D 28 mit Videoübertragung im ML E 12.
2 hrs
Fri08-10ML D 28 »
08-10ML E 12 »
G. Ducard
151-0590-00 UControl Systems II2 hrs
Tue08-10CHN E 42 »
10-12CAB G 59 »
10-12CHN F 46 »
10-12HG D 3.1 »
10-12HG D 3.3 »
10-12IFW A 32.1 »
10-12IFW A 36 »
10-12LFW C 5 »
10-12ML F 40 »
10-12ML H 34.3 »
10-12ML J 34.3 »
10-12ML J 37.1 »
G. Ducard
151-0431-00LComputational Methods for Engineering Applications Information W4 credits2V + 1U
151-0431-00 VComputational Methods for Engineering Applications2 hrs
Fri10-12HG F 1 »
J. H. Walther
151-0431-00 UComputational Methods for Engineering Applications
The exercise will start in the 2nd week of the Semester.
1 hrs
Tue15-16CHN E 42 »
15-16HG G 26.1 »
15-16ML F 38 »
15-16ML H 34.3 »
15-16ML J 34.3 »
15-16ML J 37.1 »
15-16NO C 6 »
Wed16-17CHN D 44 »
Thu17-18HG E 27 »
15.03.17-18HG E 27 »
22.03.17-18HG E 27 »
J. H. Walther
151-0942-00LIntroduction to Chemical EngineeringW4 credits3G
151-0942-00 GIntroduction to Chemical Engineering
The course starts in the 2nd week of the Semester.
3 hrs
Mon15-18HG F 3 »
M. Mazzotti
151-0966-00LIntroduction to Quantum Mechanics for EngineersW4 credits2V + 2U
151-0966-00 VIntroduction to Quantum Mechanics for Engineers2 hrs
Wed10-12HG E 5 »
D. J. Norris
151-0966-00 UIntroduction to Quantum Mechanics for Engineers
The exercise will start in the 2nd week of the Semester.
2 hrs
Wed13-15IFW A 36 »
13-15LFW E 15 »
Thu08-10CHN C 14 »
08-10NO C 6 »
D. J. Norris
626-0012-00LBioengineering
For the Focus Biomedical Engineering this course is strongly recommended to be chosen among the Electives.
W4 credits3G
626-0012-00 GBioengineering
Vorlesung: Do 9-11
Übungen in Gruppen: Do 11-12
3 hrs
Thu09-11NO C 60 »
11-12CAB G 11 »
11-12CAB G 59 »
11-12ETZ H 91 »
11-12HG D 5.3 »
11-12IFW A 32.1 »
11-12IFW B 42 »
11-12IFW C 31 »
11-12LFW C 5 »
11-12NO E 39 »
S. Panke, J. G. Snedeker
Engineering Tools III
The participation at the Engineering Tools course is mandatory. If you miss any classes, no credit points will be awarded. For exemptions you have to contact the lecturer of the course.
NumberTitleTypeECTSHoursLecturers
151-0042-01LEngineering Tool III: FEM-Programs Information Restricted registration - show details
The Engineering Tool course is for MAVT-Bachelor students only.

The enrollment in either this course or in the course "Engineering Tool III: Object oriented programming with C++" (151-0112-10L) is mandatory.

Only one course can be chosen per semester. All Engineering Tool courses are for MAVT-Bachelor students only.
W0.4 credits1K
151-0042-01 KIngenieur-Tool III: FEM-Programme Special students and auditors need a special permission from the lecturers.12s hrs
21.02.13-17CHN C 14 »
22.02.13-17HG F 1 »
23.02.13-17ML H 44 »
G. Kress
151-0112-10LEngineering Tool III: Object Oriented Programming with C++ Restricted registration - show details
The Engineering Tool course is for MAVT-Bachelor students only.

The enrollment in either this course or in the course "Engineering Tool III: FEM-Programme" (151-0042-01L) is mandatory.

Only one course can be chosen per semester. All Engineering Tool courses are for MAVT-Bachelor students only.
W0.4 credits1K
151-0112-10 KEngineering Tool III: Object Oriented Programming with C++12s hrs
21.02.13-17ETF E 1 »
22.02.14-18HG G 3 »
23.02.13-17ETF E 1 »
D. Rossinelli
Laboratory Practice
NumberTitleTypeECTSHoursLecturers
151-0029-10LLaboratory Practice Restricted registration - show details
Einschreibung nur unter www.mavt.ethz.ch/praktika möglich.
Keine Belegung über myStudies notwendig.
O2 credits4P
151-0029-10 PLabor-Praktika Special students and auditors need a special permission from the lecturers.
Nähere Informationen über die von D-PHYS angebotenen Labor-Praktika erhalten Sie in der Einführungsveranstaltung am Mittwoch 22.02.2017 von 12h-13h im NO C 60.
4 hrs
22.02.12-13NO C 60 »
Lecturers
6. Semester
Focus Project
Focus Projects in Mechatronics
NumberTitleTypeECTSHoursLecturers
151-0073-11LAmphibious Robot
Prerequisite: Enrollment for 151-0073-10L Amphibious Robot in HS16.
W14 credits15A
151-0073-11 AAmphibious Robot210s hrsR. Siegwart
151-0073-31LRobo-Racer
Prerequisite: Enrollment for 151-0073-30L Robo-Racer in HS16.
W14 credits15A
151-0073-31 ARobo-Racer210s hrsR. Siegwart, M. Hutter
151-0073-41LAdaptive Helicopter Landing Gear
Prerequisite: Enrollment for 151-0073-40L Adaptive Helicopter Landing Gear in HS16.
W14 credits15A
151-0073-41 AAdaptive Helicopter Landing Gear210s hrsM. Hutter
Focus Projects in Manufacturing
NumberTitleTypeECTSHoursLecturers
151-0075-11LSUNCAR - iRoadster - Chassis
Prerequisite: Enrollment for 151-0075-10L SUNCAR - iRoadster - Chassis in HS16.
W14 credits15A
151-0075-11 ASUNCAR - iRoadster - Chassis210s hrsK. Wegener
151-0075-21LFormula Student Electric - Chassis and Suspension
Prerequisite: Enrollment for 151-0075-20L Formula Student Electric - Chassis and Suspension in HS16.
W14 credits15A
151-0075-21 AFormula Student Electric - Chassis und Fahrwerk210s hrsP. Hora
151-0075-31LSUNCAR - iRoadster - Antrieb
Prerequisite: Enrollment for 151-0075-30L SUNCAR - iRoadster - Antrieb in HS16.
W14 credits15A
151-0075-31 ASUNCAR - iRoadster - Antrieb210s hrsK. Wegener
151-0075-41LFormula Student Electric - Drivetrain
Prerequisite: Enrollment for 151-0075-40L Formula Student Electric - Drivetrain in HS16.
W14 credits15A
151-0075-41 AFormula Student Electric - Antriebsstrang210s hrsP. Hora
Focus Projects in Design, Mechanics and Materials
NumberTitleTypeECTSHoursLecturers
151-0079-21LSeatCase - An Innovative Airline Seat
Prerequisite: Enrollment for 151-0079-20L SeatCase - An Innovative Airline Seat in HS16.
W14 credits15A
151-0079-21 ASeatCase - An Innovative Airline Seat210s hrsP. Ermanni
151-0079-31LAirborne Wind Energy System
Prerequisite: Enrollment for 151-0079-30L Airborne Wind Energy System in HS16.
W14 credits15A
151-0079-31 AAirborne Wind Energy System210s hrsP. Ermanni
151-0079-41LCFLF System: Free Form 3D Printing of Fibre Composite Structures
Prerequisite: Enrollment for 151-0079-40L CFLF System: Free Form 3D Printing of Fibre Composite Structures in HS16.
W14 credits15A
151-0079-41 ACFLF System: Free Form 3D Printing of Fibre Composite Structures210s hrsP. Ermanni
151-0079-51LSkinfactory BioReactor Restricted registration - show details
Prerequisite: Enrollment for 151-0079-52L Skinfactory BioReactor in HS16.
W14 credits15A
151-0079-51 ASkinfactory BioReactor210s hrsM. Meboldt
Courses Eligible for Focus Projects
NumberTitleTypeECTSHoursLecturers
151-0662-00LProgramming for Robotics - Introduction to ROS Restricted registration - show details
Number of participants limited to 70.

This course targets senior Bachelor students as well as Master students focusing on Robotics, Systems, and Control. Priority is given to people conducting a project work in the field.
W1 credit2G
151-0662-00 GProgramming for Robotics - Introduction to ROS30s hrs
20.02.08-12HG G 1 »
23.02.08-12HG G 1 »
24.02.08-12HG G 1 »
27.02.08-12HG G 1 »
02.03.08-12HG G 1 »
M. Hutter
151-3204-00LCoaching, Leading and Organising Innovation ProjectsW4 credits4V
151-3204-00 VCoaching, Koordination und Organisation von Innovations-Projekten
Die Auftaktveranstaltung findet am 20.02.2017 von 8.30-17.00 Uhr statt.
4 hrs
Mon15-18CAB G 56 »
20.02.08-17LEO B 8.1 »
I. Goller, R. P. Haas, M. Meboldt
Focus Specialization
Energy, Flows and Processes
Focus Coordinator: Prof. Christoph Müller
In order to achieve the required 20 credit points for the Focus Specialization Energy, Flows and Processes you need to choose at least 2 of the 4 compulsory courses (HS/FS) and at least 2 of the elective courses (HS/FS). One course could be selected among all the courses offered by D-MAVT (Bachelor and Masters).
Compulsory Courses
NumberTitleTypeECTSHoursLecturers
151-0208-00LComputational Methods for Flow, Heat and Mass Transfer ProblemsW+4 credits2V + 2U
151-0208-00 VBerechnungsmethoden der Energie- und Verfahrenstechnik2 hrs
Wed08-10HG D 1.2 »
P. Jenny
151-0208-00 UBerechnungsmethoden der Energie- und Verfahrenstechnik2 hrs
Wed10-12HG D 1.2 »
P. Jenny
151-0942-00LIntroduction to Chemical EngineeringW+4 credits3G
151-0942-00 GIntroduction to Chemical Engineering
The course starts in the 2nd week of the Semester.
3 hrs
Mon15-18HG F 3 »
M. Mazzotti
Elective Courses
NumberTitleTypeECTSHoursLecturers
151-0054-00LThermal Design and Optimization Restricted registration - show details
Course will no longer take place after FS17.

Prerequisites:
Thermodynamics I (151-0051-00L) ,
Thermodynamics II (151-0052-00L) and
Thermodynamics III (151-0261-00L)
W4 credits2V + 2U
151-0054-00 VWärmeaustausch: Gestaltung und Optimierung Special students and auditors need a special permission from the lecturers.2 hrs
Mon10-12ML F 39 »
P. Rudolf von Rohr
151-0054-00 UWärmeaustausch: Gestaltung und Optimierung2 hrs
Mon13-15ML F 39 »
P. Rudolf von Rohr
151-0206-00LEnergy Systems and Power EngineeringW4 credits2V + 2U
151-0206-00 VEnergy Systems and Power Engineering2 hrs
Tue10-12ML H 44 »
R. S. Abhari, A. Steinfeld
151-0206-00 UEnergy Systems and Power Engineering
Die Übungen finden ab der 2. Semesterwoche statt.
2 hrs
Tue12-14ML F 36 »
12-14ML H 44 »
R. S. Abhari, A. Steinfeld
151-0966-00LIntroduction to Quantum Mechanics for EngineersW4 credits2V + 2U
151-0966-00 VIntroduction to Quantum Mechanics for Engineers2 hrs
Wed10-12HG E 5 »
D. J. Norris
151-0966-00 UIntroduction to Quantum Mechanics for Engineers
The exercise will start in the 2nd week of the Semester.
2 hrs
Wed13-15IFW A 36 »
13-15LFW E 15 »
Thu08-10CHN C 14 »
08-10NO C 6 »
D. J. Norris
151-0135-00LAdditional Case for the Focus Specialization Restricted registration - show details
Exclusive for D-MAVT Bachelor's students in Focus Specialization.
For enrollment, please contact the D-MAVT Student Administration.
W1 credit2A
151-0135-00 AErgänzendes Projekt für die Fokus-Vertiefung Special students and auditors need a special permission from the lecturers.30s hrsby appt.Professors
Mechatronics
Focus Coordinator: Prof. Bradley Nelson
To achieve the 20 credits for Focus Specialization Mechatronics, 151-0640-00L Studies on Mechatronics is compulsory.
Compulsory Courses
NumberTitleTypeECTSHoursLecturers
151-0640-00LStudies on Mechatronics Information
The following professors can be chosen and please contact the professor directly:
M. Chli, R. D'Andrea, J. Dual, E. Frazzoli, R. Gassert, C. Hierold, M. Hutter, W. Karlen, J. Lygeros, M. Meboldt, B. Nelson, C. Onder, M. Pollefeys, D. Poulikakos, R. Riener, R.Y. Siegwart, L. Thiele, K. Wegener and M. Zeilinger

This course is not available to incoming exchange students.
O5 credits5A
151-0640-00 AStudies on Mechatronics
Registration and release of the issue after direct contact with the selected professor at the beginning of the semester.
Language: English or German - depending on the lecturer
5 hrsProfessors
Elective Courses
NumberTitleTypeECTSHoursLecturers
151-0206-00LEnergy Systems and Power EngineeringW4 credits2V + 2U
151-0206-00 VEnergy Systems and Power Engineering2 hrs
Tue10-12ML H 44 »
R. S. Abhari, A. Steinfeld
151-0206-00 UEnergy Systems and Power Engineering
Die Übungen finden ab der 2. Semesterwoche statt.
2 hrs
Tue12-14ML F 36 »
12-14ML H 44 »
R. S. Abhari, A. Steinfeld
151-0516-00LNon-smooth DynamicsW5 credits5G
151-0516-00 GNicht-glatte Dynamik5 hrs
Mon12-14HG E 1.1 »
Tue09-10ML F 34 »
12-14HG E 1.1 »
C. Glocker
151-0540-00LExperimental Mechanics Information W4 credits2V + 1U
151-0540-00 VExperimentelle Mechanik2 hrs
Fri10-12ML F 39 »
J. Dual
151-0540-00 UExperimentelle Mechanik1 hrs
Fri12-13ML F 39 »
J. Dual
151-0630-00LNanorobotics Information W4 credits2V + 1U
151-0630-00 VNanorobotics2 hrs
Tue10-12ML F 36 »
06.06.10-12ML F 36 »
S. Pané Vidal, B. Nelson
151-0630-00 UNanorobotics1 hrs
Thu10-11CHN C 14 »
S. Pané Vidal, B. Nelson
151-0641-00LIntroduction to Robotics and Mechatronics Information Restricted registration - show details
Number of participants limited to 60.

Enrollment is only valid through registration on the MSRL Website (www.msrl.ethz.ch) and will open on 12 December 2016. Registration per e-mail is no longer accepted!
W4 credits2V + 2U
151-0641-00 VIntroduction to Robotics and Mechatronics
Permission from lecturers required for all students.
2 hrs
Mon16-18ML F 38 »
10.04.16-18ML D 28 »
B. Nelson
151-0641-00 UIntroduction to Robotics and Mechatronics
Permission from lecturers required for all students.
A choice of four different time slots is arranged for the exercise session in a goup room.
The students will be informed about it during the enrollment process.
2 hrs
29.05.16-18ML F 36 »
B. Nelson
151-1224-00LOil-Hydraulics and PneumaticsW4 credits2V + 2U
151-1224-00 VÖlhydraulik und Pneumatik2 hrs
Wed08-10ML F 39 »
31.05.10-13IFW A 36 »
J.  Lodewyks, K. Wegener
151-1224-00 UÖlhydraulik und Pneumatik2 hrs
Wed10-12ML F 39 »
J.  Lodewyks, K. Wegener
227-0124-00LEmbedded Systems Information W6 credits4G
227-0124-00 GEmbedded Systems
Übungen in Gruppen.
4 hrs
Wed13-17ETF C 1 »
15-17ETZ D 61.1 »
15-17ETZ D 61.2 »
17-19ETZ D 61.1 »
17-19ETZ D 61.2 »
L. Thiele
227-0516-01LElectrical Drive Systems I Information W6 credits4G
227-0516-01 GElektrische Antriebssysteme I4 hrs
Tue13-17ETF E 1 »
P. Steimer, A. Omlin, C. A. Stulz
151-0135-00LAdditional Case for the Focus Specialization Restricted registration - show details
Exclusive for D-MAVT Bachelor's students in Focus Specialization.
For enrollment, please contact the D-MAVT Student Administration.
W1 credit2A
151-0135-00 AErgänzendes Projekt für die Fokus-Vertiefung Special students and auditors need a special permission from the lecturers.30s hrsby appt.Professors
Microsystems and Nanoscale Engineering
Focus Coordinator: Prof. Christofer Hierold
NumberTitleTypeECTSHoursLecturers
151-0060-00LThermodynamics and Energy Conversion in Micro- and Nanoscale TechnologiesW4 credits2V + 2U
151-0060-00 VThermodynamics and Energy Conversion in Micro- and Nanoscale Technologies2 hrs
Wed13-15ML F 39 »
T. Schutzius, H. Eghlidi
151-0060-00 UThermodynamics and Energy Conversion in Micro- and Nanoscale Technologies2 hrs
Thu09-11ML F 40 »
24.05.12-15HG E 23 »
31.05.12-15HG E 23 »
T. Schutzius, H. Eghlidi
151-0516-00LNon-smooth DynamicsW5 credits5G
151-0516-00 GNicht-glatte Dynamik5 hrs
Mon12-14HG E 1.1 »
Tue09-10ML F 34 »
12-14HG E 1.1 »
C. Glocker
151-0540-00LExperimental Mechanics Information W4 credits2V + 1U
151-0540-00 VExperimentelle Mechanik2 hrs
Fri10-12ML F 39 »
J. Dual
151-0540-00 UExperimentelle Mechanik1 hrs
Fri12-13ML F 39 »
J. Dual
151-0622-00LMeasuring on the Nanometer ScaleW2 credits2G
151-0622-00 GMeasuring on the Nanometer Scale2 hrs
Thu10-12ML F 38 »
A. Stemmer
151-0630-00LNanorobotics Information W4 credits2V + 1U
151-0630-00 VNanorobotics2 hrs
Tue10-12ML F 36 »
06.06.10-12ML F 36 »
S. Pané Vidal, B. Nelson
151-0630-00 UNanorobotics1 hrs
Thu10-11CHN C 14 »
S. Pané Vidal, B. Nelson
151-0643-00LStudies on Micro and Nano Systems Information
Please contact one of the following professors directly:
J. Dual, C. Hierold, B. Nelson, D. Norris, D. Poulikakos, S.E. Pratsinis and A. Stemmer

This course is not available to incoming exchange students.
W5 credits5A
151-0643-00 AStudies on Micro and Nano Systems5 hrsby appt.Professors
151-0902-00LMicro- and Nanoparticle TechnologyW6 credits2V + 2U
151-0902-00 VMicro- and Nanoparticle Technology2 hrs
Tue10-12CLA E 4 »
S. E. Pratsinis, R. Büchel, M. Eggersdorfer, K. Wegner
151-0902-00 UMicro- and Nanoparticle Technology2 hrs
Wed15-17CLA E 4 »
K. Wegner, R. Büchel, M. Eggersdorfer
151-0966-00LIntroduction to Quantum Mechanics for EngineersW4 credits2V + 2U
151-0966-00 VIntroduction to Quantum Mechanics for Engineers2 hrs
Wed10-12HG E 5 »
D. J. Norris
151-0966-00 UIntroduction to Quantum Mechanics for Engineers
The exercise will start in the 2nd week of the Semester.
2 hrs
Wed13-15IFW A 36 »
13-15LFW E 15 »
Thu08-10CHN C 14 »
08-10NO C 6 »
D. J. Norris
151-0135-00LAdditional Case for the Focus Specialization Restricted registration - show details
Exclusive for D-MAVT Bachelor's students in Focus Specialization.
For enrollment, please contact the D-MAVT Student Administration.
W1 credit2A
151-0135-00 AErgänzendes Projekt für die Fokus-Vertiefung Special students and auditors need a special permission from the lecturers.30s hrsby appt.Professors
Manufacturing Science
Focus Coordinator: Prof. Konrad Wegener
To achieve the required 20 credit points for the focus specialization you need to pass all 3 compulsory courses (HS/FS). The other 8 credit points can be achieved from the elective courses.
Compulsory Courses
NumberTitleTypeECTSHoursLecturers
151-0720-00LProduction Machines IO4 credits4G
151-0720-00 GProduktionsmaschinen I4 hrs
Tue10-12ML H 41.1 »
Thu10-12CLA E 4 »
K. Wegener, S. Weikert
Elective Courses
NumberTitleTypeECTSHoursLecturers
151-0304-00LEngineering Design II Information W4 credits4G
151-0304-00 GDimensionieren II
Vorlesung: MI, 8-10
Übungen: MI, 10-12
4 hrs
Wed08-10ML H 44 »
10-12HG D 3.1 »
10-12HG D 5.1 »
10-12IFW A 34 »
10-12IFW B 42 »
10-12IFW C 31 »
10-12IFW C 33 »
10-12ML J 34.1 »
10-12ML J 34.3 »
K. Wegener
151-0306-00LVisualization, Simulation and Interaction - Virtual Reality I Information W+4 credits4G
151-0306-00 GVisualization, Simulation and Interaction - Virtual Reality I
Start in the second week of the Semester.
4 hrs
Thu13-17ML H 44 »
A. Kunz
151-0516-00LNon-smooth DynamicsW+5 credits5G
151-0516-00 GNicht-glatte Dynamik5 hrs
Mon12-14HG E 1.1 »
Tue09-10ML F 34 »
12-14HG E 1.1 »
C. Glocker
151-0540-00LExperimental Mechanics Information W4 credits2V + 1U
151-0540-00 VExperimentelle Mechanik2 hrs
Fri10-12ML F 39 »
J. Dual
151-0540-00 UExperimentelle Mechanik1 hrs
Fri12-13ML F 39 »
J. Dual
151-0630-00LNanorobotics Information W4 credits2V + 1U
151-0630-00 VNanorobotics2 hrs
Tue10-12ML F 36 »
06.06.10-12ML F 36 »
S. Pané Vidal, B. Nelson
151-0630-00 UNanorobotics1 hrs
Thu10-11CHN C 14 »
S. Pané Vidal, B. Nelson
151-0641-00LIntroduction to Robotics and Mechatronics Information Restricted registration - show details
Number of participants limited to 60.

Enrollment is only valid through registration on the MSRL Website (www.msrl.ethz.ch) and will open on 12 December 2016. Registration per e-mail is no longer accepted!
W4 credits2V + 2U
151-0641-00 VIntroduction to Robotics and Mechatronics
Permission from lecturers required for all students.
2 hrs
Mon16-18ML F 38 »
10.04.16-18ML D 28 »
B. Nelson
151-0641-00 UIntroduction to Robotics and Mechatronics
Permission from lecturers required for all students.
A choice of four different time slots is arranged for the exercise session in a goup room.
The students will be informed about it during the enrollment process.
2 hrs
29.05.16-18ML F 36 »
B. Nelson
151-0718-00LMetrology for Production - Metrology of WorkpiecesW+4 credits2V + 2U
151-0718-00 VQualitätssicherung - Werkstückmesstechnik2 hrs
Mon10-12ML H 34.3 »
16.03.08-10ML J 37.1 »
23.03.08-10ML J 37.1 »
27.04.08-10ML J 37.1 »
A. Günther
151-0718-00 UQualitätssicherung - Werkstückmesstechnik2 hrs
Thu10-12ML H 34.3 »
27.03.08-10ML H 34.3 »
08.05.08-10ML H 34.3 »
A. Günther
151-0735-00LDynamic Behavior of Materials and StructuresW4 credits2V + 2U
151-0735-00 VDynamic Behavior of Materials and Structures
Does not take place this semester.
2 hrsD. Mohr
151-0735-00 UDynamic Behavior of Materials and Structures
Does not take place this semester.
2 hrsD. Mohr
151-0802-00LAutomation TechnologyW+4 credits2V + 1U
151-0802-00 VAutomation Technology2 hrs
Mon14-16LFV E 41 »
H. Wild, K. Wegener
151-0802-00 UAutomation Technology1 hrs
Mon16-17LFV E 41 »
H. Wild, K. Wegener
151-0834-00LForming Technology II - Introduction Virtual Process Modelling Information W+4 credits2V + 2U
151-0834-00 VUmformtechnik II - Numerische Simulationsverfahren2 hrs
Thu08-10CLA E 4 »
P. Hora
151-0834-00 UUmformtechnik II - Numerische Simulationsverfahren
Die Übung beginnt in der zweiten Semesterwoche.
2 hrs
Wed14-16CLA F 2 »
P. Hora
151-0836-00LVirtual Process Control in Forming Manufacturing Systems Information W+5 credits2V + 2U
151-0836-00 VMethoden der virtuellen Prozessauslegung umformtechnischer Systeme2 hrs
Mon10-12CLA E 4 »
P. Hora
151-0836-00 UMethoden der virtuellen Prozessauslegung umformtechnischer Systeme2 hrs
Tue15-17CLA F 2 »
P. Hora
151-0840-00LPrinciples of FEM-Based Optimization and Robustness Analysis Information W+5 credits2V + 2U
151-0840-00 VPrinciples of FEM-Based Optimization and Robustness Analysis2 hrs
Fri08-10CLA E 4 »
B. Berisha, P. Hora, N. Manopulo
151-0840-00 UPrinciples of FEM-Based Optimization and Robustness Analysis
If required two dates for exercises will be offered.

Bei Bedarf werden zwei Übungstermine angeboten.
2 hrs
Fri10-12CLA F 2 »
B. Berisha, P. Hora, N. Manopulo
151-1224-00LOil-Hydraulics and PneumaticsW4 credits2V + 2U
151-1224-00 VÖlhydraulik und Pneumatik2 hrs
Wed08-10ML F 39 »
31.05.10-13IFW A 36 »
J.  Lodewyks, K. Wegener
151-1224-00 UÖlhydraulik und Pneumatik2 hrs
Wed10-12ML F 39 »
J.  Lodewyks, K. Wegener
227-0516-01LElectrical Drive Systems I Information W6 credits4G
227-0516-01 GElektrische Antriebssysteme I4 hrs
Tue13-17ETF E 1 »
P. Steimer, A. Omlin, C. A. Stulz
Biomedical Engineering
Focus Coordinator: Prof. Edoardo Mazza
NumberTitleTypeECTSHoursLecturers
151-0540-00LExperimental Mechanics Information W4 credits2V + 1U
151-0540-00 VExperimentelle Mechanik2 hrs
Fri10-12ML F 39 »
J. Dual
151-0540-00 UExperimentelle Mechanik1 hrs
Fri12-13ML F 39 »
J. Dual
151-0630-00LNanorobotics Information W4 credits2V + 1U
151-0630-00 VNanorobotics2 hrs
Tue10-12ML F 36 »
06.06.10-12ML F 36 »
S. Pané Vidal, B. Nelson
151-0630-00 UNanorobotics1 hrs
Thu10-11CHN C 14 »
S. Pané Vidal, B. Nelson
151-0641-00LIntroduction to Robotics and Mechatronics Information Restricted registration - show details
Number of participants limited to 60.

Enrollment is only valid through registration on the MSRL Website (www.msrl.ethz.ch) and will open on 12 December 2016. Registration per e-mail is no longer accepted!
W4 credits2V + 2U
151-0641-00 VIntroduction to Robotics and Mechatronics
Permission from lecturers required for all students.
2 hrs
Mon16-18ML F 38 »
10.04.16-18ML D 28 »
B. Nelson
151-0641-00 UIntroduction to Robotics and Mechatronics
Permission from lecturers required for all students.
A choice of four different time slots is arranged for the exercise session in a goup room.
The students will be informed about it during the enrollment process.
2 hrs
29.05.16-18ML F 36 »
B. Nelson
151-0980-00LBiofluiddynamicsW4 credits2V + 1U
151-0980-00 VBiofluiddynamics2 hrs
Fri10-12ML F 34 »
D. Obrist, P. Jenny
151-0980-00 UBiofluiddynamics1 hrs
Fri12-13ML F 34 »
D. Obrist, P. Jenny
376-0022-00LIntroduction to Biomedical Engineering II Restricted registration - show details W4 credits3G
376-0022-00 GIntroduction to Biomedical Engineering II Special students and auditors need a special permission from the lecturers.
Vorlesung: 13-15h
Übungen: 15-16h
3 hrs
Tue13-15HIL E 7 »
15-16HIL D 60.1 »
15-16HIL E 10.1 »
15-16HIT F 31.2 »
15-16HIT F 32 »
P. Christen, R. Müller, R. Riener, J. Vörös
376-0206-00LBiomechanics IIW4 credits3G
376-0206-00 GBiomechanik II
Vorlesung: Di 13-15
3 hrs
Mon08-09HCI D 4 »
08-09HCI D 6 »
Tue12-13HCI D 4 »
12-13HCI J 8 »
13-15HIL E 4 »
15-16HCI D 6 »
15-16HCI H 8.1 »
15-17HCI D 4 »
Wed11-12HCI D 4 »
13-14HCI D 6 »
13-14HCP E 47.2 »
S.  Lorenzetti, R. List, B. Taylor
376-0210-00LBiomechatronics
Primarily designed for HST-students

The Biomechatronics lecture is not appropriate for students who already attended the lecture "Physical Human-Robot Interaction"(376-1504-00L), because it covers similar topics.

Matlab skills are beneficial-> online Tutorial http://www.imrtweb.ethz.ch/matlab/
W4 credits3G
376-0210-00 GBiomechatronics3 hrs
Wed13-16HG F 1 »
22.02.13-16ML E 12 »
01.03.13-16ML E 12 »
R. Riener, R. Gassert
Management, Technology and Economics
Focus Coordinators: Prof. Marko Köthenbürger D-MTEC and Dr. Jost Hamschmidt D-MTEC
NumberTitleTypeECTSHoursLecturers
151-0700-00LManufacturingW4 credits2V + 2U
151-0700-00 VFertigungstechnik
Die Vorlesung beginnt in der zweiten Semesterwoche.
2 hrs
Wed14-16HG G 3 »
K. Wegener
151-0700-00 UFertigungstechnik
Die Übung beginnt in der zweiten Semesterwoche.
2 hrs
Wed16-18HG D 1.1 »
16-18HG D 7.1 »
16-18HG G 3 »
24.05.16-17HG D 1.1 »
16-17HG D 7.1 »
16-17HG G 3 »
K. Wegener
351-0578-00LIntroduction to Economic Policy Restricted registration - show details
Number of participants limited to 100.
W2 credits2V
351-0578-00 VEinführung in die Wirtschaftspolitik2 hrs
Thu13-15HG E 1.1 »
H. Mikosch
351-0778-00LDiscovering Management
Entry level course in management for BSc, MSc and PHD students at all levels not belonging to D-MTEC.
This course can be complemented with Discovering Management (Excercises) 351-0778-01L.
W3 credits3G
351-0778-00 GDiscovering Management3 hrs
Thu08-11HG G 5 »
B. Clarysse, M. Ambühl, S. Brusoni, L. De Cuyper, E. Fleisch, G. Grote, V. Hoffmann, P. Schönsleben, G. von Krogh, F. von Wangenheim
351-0778-01LDiscovering Management (Exercises)
Complementary exercises for the module Discovering Managment.

Prerequisite: Participation and successful completion of the module Discovering Management (351-0778-00L) is mandatory.
W1 credit1U
351-0778-01 UDiscovering Management (Exercises)
Please refer to the course website for further information on the content, credit conditions and schedule of the lectures:
www.dm.ethz.ch
1 hrs
Thu11-12HG G 5 »
B. Clarysse, M.  Bourquin Arnold, L. De Cuyper
363-0302-00LHuman Resource Management: Leading Teams Information
Only for MTEC MAS students: Successful completion of this lecture is mandatory if you wish to enroll in the MAS MTEC course 365-1068-00 Case Studies in HRM Leading Teams in the following spring semester.
W+3 credits2G
363-0302-00 GHuman Resource Management: Leading Teams2 hrs
Mon08-10ML F 36 »
06.03.08-10ML F 38 »
08-10ML F 40 »
13.03.08-10ML F 38 »
08-10ML F 39 »
08-10ML F 40 »
03.04.08-10ML F 38 »
08-10ML F 39 »
08-10ML F 40 »
29.05.08-10ML F 38 »
08-10ML F 39 »
08-10ML F 40 »
G. Grote
363-0302-02LHuman Resource Management: Leading Teams (Additional Cases) Restricted registration - show details
Only for Mechanical Engineering BSc Focus MTEC
W+1 credit2A
363-0302-02 AHuman Resource Management: Leading Teams (Additional Cases)
individuell terminierte Projektarbeit mit einzelnen Studentengruppen
25s hrsG. Grote
363-0560-00LFinancial Management Information W3 credits2V
363-0560-00 VFinancial Management2 hrs
Mon10-12HG E 5 »
J.‑P. Chardonnens
363-0622-00LBasic Management Skills Restricted registration - show details
Limited number of participants.
W3 credits8G
363-0622-00 GBasic Management Skills
Permission from lecturers required for all students.
Blockkurs 2 x 5 Tage

Block I: 30.01.-03.02.2017, 9-17 h
Block II: 13.02.-17.02.2017, 9-17 h

where: tba
8 hrsR. Specht
363-1017-00LRisk and Insurance EconomicsW4 credits3V
363-1017-00 VRisk and Insurance Economics
Bi-weekly problem set classes starting mid-March on thursdays from 17-19 h.
3 hrs
Wed17-19LFW B 1 »
Thu17-19HG D 1.1 »
30.03.17-19HG D 1.2 »
04.05.17-19HG D 1.1 »
W. Mimra
363-1031-00LQuantitative Methods in Energy and Environmental EconomicsW4 credits3G
363-1031-00 GQuantitative Methods in Energy and Environmental Economics
Lecture 10:00-12:00, Exercise: 13:00-15:00 (irregular)
3 hrs
Mon10-12ETZ E 9 »
Tue13-15LEE E 101 »
15.05.12-13ETZ E 9 »
22.05.09-10ETZ E 9 »
12-13ETZ E 9 »
29.05.09-10ETZ E 9 »
12-13ETZ E 9 »
S. Rausch, A. L. Martinez Cruz
Design, Mechanics and Materials
Focus Coordinator: Prof. Kristina Shea
In order to achieve the required 20 credit points for the Focus Specialization Design, Mechanics and Material you are free to choose any of the courses offered within the focus and are encouraged to select among those recommended. If you wish to take one of the Master level courses, you must get approval from the lecturer.
NumberTitleTypeECTSHoursLecturers
151-0304-00LEngineering Design II Information W4 credits4G
151-0304-00 GDimensionieren II
Vorlesung: MI, 8-10
Übungen: MI, 10-12
4 hrs
Wed08-10ML H 44 »
10-12HG D 3.1 »
10-12HG D 5.1 »
10-12IFW A 34 »
10-12IFW B 42 »
10-12IFW C 31 »
10-12IFW C 33 »
10-12ML J 34.1 »
10-12ML J 34.3 »
K. Wegener
151-0306-00LVisualization, Simulation and Interaction - Virtual Reality I Information W4 credits4G
151-0306-00 GVisualization, Simulation and Interaction - Virtual Reality I
Start in the second week of the Semester.
4 hrs
Thu13-17ML H 44 »
A. Kunz
151-0324-00LEngineering Design with Polymers and Polymer Composites Information W4 credits2V + 1U
151-0324-00 VGL zum Bemessen von Kunststoffbauteilen2 hrs
Thu08-10HG D 1.1 »
G. P. Terrasi
151-0324-00 UGL zum Bemessen von Kunststoffbauteilen
The date and location of the exercise will be given in the beginning of the Semester.
1 hrs
28.03.14-16HG F 26.1 »
30.03.10-12CHN D 44 »
04.04.14-16HG F 26.1 »
06.04.10-12CHN D 44 »
11.04.14-16HG F 26.1 »
16.05.14-16HG F 26.1 »
18.05.10-12CHN D 44 »
G. P. Terrasi
151-0332-00LInterdisciplinary Product Development: Definition, Realisation and Validation of Product Concepts
Number of participants limited to: 5 (ETHZ) + 20 (ZHdK)

To apply for the course please create a pdf of 1-2 Pages describing yourself and your motivation for the course as well as one or more of your former development projects. Please add minimum one picture and send the pdf to martin.schuetz@mavt.ethz.ch
W+4 credits3G + 2A
151-0332-00 GInterdisciplinary Product Development: Definition, Realisation and Validation of Product Concepts
The course will start in the second week of the semester.
After the first three courses at ETH, eight full-day and six half-day courses will take place at ZHdK. Students will be informed about details on the course dates and times by the lecturer.
3 hrs
02.03.09-17PFA L 51 »
03.03.09-17PFA L 51 »
09.03.09-17PFA L 51 »
M. Schütz, M. Meboldt
151-0332-00 AInterdisciplinary Product Development: Definition, Realisation and Validation of Product Concepts
The course starts in the second week of the semester.
3h of group work to be scheduled on Thursday or Friday by arrangement.
30s hrsM. Schütz, M. Meboldt
151-0361-00LAn Introduction to the Finite-Element Method Information W+4 credits3G
151-0361-00 GAn Introduction to the Finite-Element Method3 hrs
Tue14-17ML H 44 »
G. Kress, C. Thurnherr
151-0516-00LNon-smooth DynamicsW5 credits5G
151-0516-00 GNicht-glatte Dynamik5 hrs
Mon12-14HG E 1.1 »
Tue09-10ML F 34 »
12-14HG E 1.1 »
C. Glocker
151-0540-00LExperimental Mechanics Information W+4 credits2V + 1U
151-0540-00 VExperimentelle Mechanik2 hrs
Fri10-12ML F 39 »
J. Dual
151-0540-00 UExperimentelle Mechanik1 hrs
Fri12-13ML F 39 »
J. Dual
151-0735-00LDynamic Behavior of Materials and StructuresW4 credits2V + 2U
151-0735-00 VDynamic Behavior of Materials and Structures
Does not take place this semester.
2 hrsD. Mohr
151-0735-00 UDynamic Behavior of Materials and Structures
Does not take place this semester.
2 hrsD. Mohr
151-3202-00LEngineering Design Methods Restricted registration - show details
Number of participants limited to 30
W+4 credits3G
151-3202-00 GEngineering Design Methods3 hrs
Tue09-12CAB G 56 »
K. Shea, T. Stankovic
151-3204-00LCoaching, Leading and Organising Innovation ProjectsW4 credits4V
151-3204-00 VCoaching, Koordination und Organisation von Innovations-Projekten
Die Auftaktveranstaltung findet am 20.02.2017 von 8.30-17.00 Uhr statt.
4 hrs
Mon15-18CAB G 56 »
20.02.08-17LEO B 8.1 »
I. Goller, R. P. Haas, M. Meboldt
151-3206-00LSystemic Design for SustainabilityW4 credits3G
151-3206-00 GSystemic Design for Sustainability3 hrs
Wed10-13HG G 26.3 »
T. Luthe
Engineering Tools V
The participation at the Engineering Tools course is mandatory. If you miss any classes, no credit points will be awarded. For exemptions you have to contact the lecturer of the course.
NumberTitleTypeECTSHoursLecturers
151-0018-10LEngineering Tool V: Simulation of System Failures Restricted registration - show details
Number of participants limited to 20.

Only one course can be chosen per semester. All Engineering Tool courses are for MAVT-Bachelor students only.
W0.4 credits1K
151-0018-10 KEngineering Tool V: Simulation of System Failures Special students and auditors need a special permission from the lecturers.
This block course will take place on Tuesday, Wednesday and Thursday at 13.00-17.00 in the first week of the Semester. The location of the course will be given before the Semester begins.
Teaching language: German and English
12s hrs
21.02.13-17ML H 41.2 »
22.02.13-17HG D 11 »
23.02.13-17HG D 11 »
P. Probst
151-0024-10LEngineering Tool IV/V: Digital Automotive Plant Simulation Methods Information Restricted registration - show details
Number of participants limited to 25.

Only one course can be chosen per semester. All Engineering Tool courses are for MAVT-Bachelor students only.
W0.4 credits1K
151-0024-10 KIngenieur-Tool IV/V: Simulationstools der digitalen Automobilfabrik Special students and auditors need a special permission from the lecturers.
Blockkurs in der ersten Semesterwoche.
12s hrs
21.02.13-17IFW C 42 »
22.02.13-17IFW C 42 »
23.02.13-17IFW C 42 »
P. Hora
151-0026-10LEngineering Tool V: Computing with Fortran Restricted registration - show details
Number of participants limited to 30.

Only one course can be chosen per semester. All Engineering Tool courses are for MAVT-Bachelor students only.
W0.4 credits1K
151-0026-10 KEngineering Tool V: Computing with Fortran12s hrs
21.02.13-17CHN G 46 »
22.02.13-17CHN G 46 »
23.02.13-17CHN G 46 »
A. Haselbacher
151-0027-10LEngineering Tool IV/V: Programming with LabView Restricted registration - show details
Only one course can be chosen per semester.

All Engineering Tool courses are for MAVT-Bachelor students only.
W0.4 credits1K
151-0027-10 KIngenieur-Tool IV/V: Programmierung mit LabView
Blockkurs in der ersten Semesterwoche
12s hrs
21.02.13-17ML H 34.1 »
22.02.13-17ML H 34.1 »
23.02.13-17ML H 34.1 »
L. Prochazka, T. Rösgen
151-0034-10LEngineering Tool V: Introduction to Design of Experiments (DOE) Restricted registration - show details
Number of participants limited to 36.

Only one course can be chosen per semester. All Engineering Tool courses are for MAVT-Bachelor students only.
W0.4 credits1K
151-0034-10 KIngenieur-Tool V: Einführung in die statistische Versuchsplanung (DOE) Special students and auditors need a special permission from the lecturers.
Blockkurs in der ersten Semesterwoche.
12s hrs
21.02.13-17LFW E 11 »
22.02.13-17LFW E 11 »
23.02.13-17LFW E 11 »
B. G. Rüttimann, K. Wegener
151-0055-10LEngineering Tool V: Planning of Human Work Restricted registration - show details
Number of participants limited to 20.

Only one course can be chosen per semester. All Engineering Tool courses are for MAVT-Bachelor students only.
W0.4 credits1K
151-0055-10 KIngenieur-Tool V: Planung menschlicher Arbeit Special students and auditors need a special permission from the lecturers.
Der Blockkurs findet am Dienstag, Mittwoch und Donnerstag von 13.00 bis 17.00 in der ersten Semesterwoche im Gruppenraum des Technoparks ZH statt.
12s hrsP. Acél, K. Wegener
151-0057-10LEngineering Tool IV/V: Systems Engineering for Project Work Restricted registration - show details
Number of participants limited to 60.

Only one course can be chosen per semester. All Engineering Tool courses are for MAVT-Bachelor students only.
W0.4 credits1K
151-0057-10 KIngenieur-Tool IV/V: Systems Engineering für Projekt- und Studienarbeiten Special students and auditors need a special permission from the lecturers.
Der Blockkurs findet in der ersten Semesterwoche statt.
12s hrs
21.02.13-17ML H 37.1 »
22.02.13-17ML H 37.1 »
23.02.13-17ML H 37.1 »
R. Züst, K. Wegener
151-0061-10LEngineering Tool lV/V: Scientific Writing with LaTeX and Vector Graphics Information Restricted registration - show details
Number of participants limited to 40.

Only one course can be chosen per semester. All Engineering Tool courses are for MAVT-Bachelor students only.
W0.4 credits1K
151-0061-10 KIngenieur-Tool lV/V: Wissenschaftliches Arbeiten mit LaTeX und Vektorgraphiken Special students and auditors need a special permission from the lecturers.
Blockkurs in der ersten Semesterwoche
Anwesenheitspflicht an allen drei Nachmittagen
12s hrs
21.02.13-17HG E 23 »
22.02.13-17HG E 23 »
23.02.13-17HG E 23 »
R. Gassert
151-0063-10LEngineering-Tool V: Programming with LabVIEW (for Tutors of the Innovation Project) Restricted registration - show details
Number of participants limited to 30.

Only one course can be chosen per semester. All Engineering Tool courses are for MAVT Bachelor's students only.
W0.4 credits1K
151-0063-10 KIngenieur-Tool V: Programmieren mit LabVIEW (für Innovationsprojekt Tutoren)
Blockkurs in der ersten Semesterwoche.
12s hrs
21.02.13-17HG G 1 »
22.02.13-17ML H 41.2 »
23.02.13-17HG D 12 »
J. Eisenberg, M. Meboldt
151-0068-10LEngineering-Tool V: Reduction of Production Costs and Value Analysis
Number of participants limited to 16.

Only one course can be chosen per semester. All Engineering Tool courses are for MAVT Bachelor's students only.
W0.4 credits1K
151-0068-10 KIngenieur-Tool V: Herstellkosten senken und Wertanalyse
Blockkurs in der ersten Semesterwoche.
12s hrs
21.02.13-17LEE E 126 »
22.02.13-17LEE E 126 »
23.02.13-17LEE E 126 »
M. Meboldt
151-0069-10LEngineering Tool IV: Design Optimization and CAD Restricted registration - show details
All Engineering Tool courses are for MAVT-Bachelor students only.

Number of participants limited to 25.

Only one course can be chosen per semester.
W0.4 credits1K
151-0069-10 KEngineering Tool IV: Design Optimization and CAD
Block course during the first week of the semester
12s hrs
21.02.13-17HG K 30.1 »
22.02.13-17HG K 30.1 »
23.02.13-17HG K 30.1 »
K. Shea, T. Stankovic
151-0912-10LEngineering Tool V: Patents Restricted registration - show details
Number of participants limited to 50.

All Engineering Tool courses are for MAVT-Bachelor students only.
Only one course can be chosen per semester.
W0.4 credits1K
151-0912-10 KIngenieur-Tool V: Patente12s hrs
21.02.13-17CHN E 42 »
22.02.13-17ML H 41.1 »
23.02.14-18ML F 39 »
F. Gross
Workshop Training
NumberTitleTypeECTSHoursLecturers
151-0003-00LWorkshop TrainingO5 credits
151-0003-00 PWerkstatt-Praxisexternal organisers
GESS Science in Perspective
» Recommended Science in Perspective (Type B) for D-MAVT
» see Science in Perspective: Type A: Enhancement of Reflection Capability
» see Science in Perspective: Language Courses ETH/UZH
Bachelor's Thesis
NumberTitleTypeECTSHoursLecturers
151-0001-10LBachelor's Thesis
Supervisor for the Bachelor's Thesis:
- All D-MAVT professors (https://www.mavt.ethz.ch/the-department/people/professors.html)
- Professors in other departments who are accredited to D-MAVT (https://www.mavt.ethz.ch/the-department/people/accredited-professors.html)
- D-MAVT titular professors (https://www.mavt.ethz.ch/the-department/people/titular-professors.html). For enrollment with a titular professor, please contact the D-MAVT Student Administration.
W14 credits30D
151-0001-10 DBachelor-Arbeit420s hrsby appt.Professors
151-3630-00LBachelor's Thesis (Focus Specialization Management, Technology and Economics) Restricted registration - show details
Supervisor for the Bachelor's Thesis: All D-MTEC professors (https://www.mtec.ethz.ch/people/professors.html)
W14 credits30D
151-3630-00 DBachelor's Thesis (Focus Spezialization Management, Technology and Economics)
Permission from lecturers required for all students.
420s hrsby appt.Professors