Search result: Catalogue data in Autumn Semester 2016

Mechanical Engineering Bachelor Information
5. Semester
Focus Specialization
Design, Mechanics and Materials
Focus Coordinator: Prof. Kristina Shea
In order to achieve the required 20 credit points for the Focus Specialization Design, Mechanics and Material you are free to choose any of the courses offered within the focus and are encouraged to select among those recommended. If you wish to take one of the Master level courses, you must get approval from the lecturer.
151-0360-00LProcedures for the Analysis of StructuresW+4 credits2V + 1UG. Kress
AbstractBasic theories for structure integrity calculations are presented with focus on strength, stability, fatigue and elasto-plastic structural analysis.
Theories and models for one dimesional and planar structures are presented based on energy theorems.
ObjectiveBasic principles applied in structural mechanics. Introduction to the theories of planar structures. Development of an understanding of the relationship between material properties, structural theories and design criteria.
Content1. Basic problem of continuum mechanics and energy principles: structural theories, homogenization theories; finite elements; fracture mechanics.
2.Structural theories for planar structures and stability: plane-stress, plate theory, buckling of plates (non-linear plate theory).
3.Strength of material theories and material properties: ductile behaviour, plasticity, von Mises, Tresca, principal stress criterion; brittle behaviour; viscoplastic behaviour, creep resistance.
4. Structural design: fatigue and dynamic structural analysis.
Lecture notesyes
151-0364-00LLightweight Structures Laboratory Information W+4 credits5AM. Zogg, P. Ermanni
AbstractTeams of 2 to 4 students have to design, size, and manufacture a lightweight structre complying with given specifications. A prototype as well as an improved component will be tested and assessed regarding to design and to structural mechanical criteria.
ObjectiveTo develop the skills to identify and solve typical problems of the structure mechanics on a real application. Other important aspects are to foster team work and team spirit, to link theoretical knowledge and practice, to gather practical experiences in various fields related to lightweight structures such as design, different CAE-methods and structural testing.
ContentThe task of each team (typically 2-4 students) is the realization of a load-carrying structure with selected materials. The teams are free to develop and implement their own ideas. In this context, specified requirements include information about loads, interface to the surrounding structures.

The project is structured as described below:
- Concept development
- design of the component including FEM simulation and stability checks
- manufacturing and structural testing of a prototype
- manufacturing and structural testing of an improved component
- Report

The project work is supported by selected teaching units.
Lecture noteshandouts for selected topics are available
151-0509-00LMicroscale Acoustofluidics Restricted registration - show details
Number of participants limited to 30.
W4 credits3GJ. Dual
AbstractIn this lecture the basics as well as practical aspects (from modelling to design and fabrication ) are described from a solid and fluid mechanics perspective with applications to microsystems and lab on a chip devices.
ObjectiveUnderstanding acoustophoresis, the design of devices and potential applications
ContentLinear and nonlinear acoustics, foundations of fluid and solid mechanics and piezoelectricity, Gorkov potential, numerical modelling, acoustic streaming, applications from ultrasonic microrobotics to surface acoustic wave devices
Lecture notesYes, incl. Chapters from the Tutorial: Microscale Acoustofluidics, T. Laurell and A. Lenshof, Ed., Royal Society of Chemistry, 2015
LiteratureMicroscale Acoustofluidics, T. Laurell and A. Lenshof, Ed., Royal Society of Chemistry, 2015
Prerequisites / NoticeSolid and fluid continuum mechanics. Notice: The exercise part is a mixture of presentation, lab session and hand in homework.
151-0524-00LContinuum Mechanics IW4 credits2V + 1UE. Mazza
AbstractThe lecture deals with constitutive models that are relevant for design and calculation of structures. These include anisotropic linear elsticity, linear viscoelasticity, plasticity, viscoplasticity. Homogenization theories and laminate theory are presented. Theoretical models are complemented by examples of engineering applications and eperiments.
ObjectiveBasic theories for solving continuum mechanics problems of engineering applications, with particular attention to material models.
ContentAnisotrope Elastizität, Linearelastisches und linearviskoses Stoffverhalten, Viskoelastizität, mikro-makro Modellierung, Laminattheorie, Plastizität, Viscoplastizität, Beispiele aus der Ingenieuranwendung, Vergleich mit Experimenten.
Lecture notesyes
151-0532-00LNonlinear Dynamics and Chaos I Information W4 credits2V + 2UG. Haller, F. Kogelbauer
AbstractBasic facts about nonlinear systems; stability and near-equilibrium dynamics; bifurcations; dynamical systems on the plane; non-autonomous dynamical systems; chaotic dynamics.
ObjectiveThis course is intended for Masters and Ph.D. students in engineering sciences, physics and applied mathematics who are interested in the behavior of nonlinear dynamical systems. It offers an introduction to the qualitative study of nonlinear physical phenomena modeled by differential equations or discrete maps. We discuss applications in classical mechanics, electrical engineering, fluid mechanics, and biology. A more advanced Part II of this class is offered every other year.
Content(1) Basic facts about nonlinear systems: Existence, uniqueness, and dependence on initial data.

(2) Near equilibrium dynamics: Linear and Lyapunov stability

(3) Bifurcations of equilibria: Center manifolds, normal forms, and elementary bifurcations

(4) Nonlinear dynamical systems on the plane: Phase plane techniques, limit sets, and limit cycles.

(5) Time-dependent dynamical systems: Floquet theory, Poincare maps, averaging methods, resonance
Lecture notesThe class lecture notes will be posted electronically after each lecture. Students should not rely on these but prepare their own notes during the lecture.
Prerequisites / Notice- Prerequisites: Analysis, linear algebra and a basic course in differential equations.

- Exam: two-hour written exam in English.

- Homework: A homework assignment will be due roughly every other week. Hints to solutions will be posted after the homework due dates.
151-0731-00LForming Technology I - Basic Knowledge Information W4 credits2V + 2UP. Hora
AbstractThe fundamentals of forming technology are ipresented to Mechanical, Production and Material Engineers. The content of the lecture is: Overview of manufacturing with forming techniques, deformation specific description of material properties and their experimental measurement, material laws, residual stresses, heat balance, tribological aspects of forming processes, workpiece and tool failure.
ObjectiveForming technology represents with its 70% global share in manufactured metal volume with respect to yield and cost, the most important manufacturing process in metal-working industries. Typical applications of forming technology range from the manufacturing of sheet metal compontens in auto bodies to applications in food and pharma packaging, fabrication of implants in medical technologies and to the fabrication of leads in microelectronic components. This course introduces the fundamentals which are essential to evaluate metal-forming processes and its industrial applications. This includes, together with the acquirements of the most important forming processes, the characterization of plastic material behavior and manufacturing limits.
ContentOverview of the most important processes of metal-forming technology and its field of applications, characterization of the plastic metal-forming behavior, basic principles of plasto-mechanical calculations, metal-forming residual stresses, thermo-mechanical coupling of metal-forming processes, influence of tribology. Work piece failure through cracking and folding, tool failure through rupture and mechanical wear, metal-forming tools, sheet forming and massive forming processes, handling systems, metal-forming machinery.
Lecture notesja
151-0735-00LDynamic Behavior of Materials and Structures
Does not take place this semester.
W4 credits2V + 2UD. Mohr
AbstractLectures and computer labs concerned with the modeling of the deformation response and failure of engineering materials (metals, polymers and composites) subject to extreme loadings during manufacturing, crash, impact and blast events.
ObjectiveStudents will learn to apply, understand and develop computational models of a large spectrum of engineering materials to predict their dynamic deformation response and failure in finite element simulations. Students will become familiar with important dynamic testing techniques to identify material model parameters from experiments. The ultimate goal is to provide the students with the knowledge and skills required to engineer modern multi-material solutions for high performance structures in automotive, aerospace and navel engineering.
ContentTopics include viscoelasticity, temperature and rate dependent plasticity, dynamic brittle and ductile fracture; impulse transfer, impact and wave propagation in solids; computational aspects of material model implementation into hydrocodes; simulation of dynamic failure of structures;
Lecture notesSlides of the lectures, relevant journal papers and users manuals will be provided.
LiteratureVarious books will be recommended covering the topics discussed in class
Prerequisites / NoticeCourse in continuum mechanics (mandatory), finite element method (recommended)
151-3201-00LStudies on Engineering DesignW+3 credits6AK. Shea, P. Ermanni, M. Meboldt
AbstractThis course introduces students to the exciting world of Engineering Design research, which crosses disciplines and requires a variety of skills. Each student identifies a topic in Engineering Design for further investigation, either based on those proposed or a new, agreed topic.
ObjectiveStudents gain their first knowledge of Engineering Design research and carry out their first, independent scientific study. Students learn how to read scientific literature and critically analyze and discuss them, gain hands-on experience in the area and learn how to document their work concisely through a report and short presentation.
ContentStudents identify 5-10 journal articles, or scientifically equivalent, in consultation with the supervisor and can define a small, related project in the area to gain hands-on experience. In the beginning of the semester, students develop with the supervisor a 2-page proposal outlining the objective of the study, tasks to be carried out and a brief time plan for the work. Once agreed, the project starts resulting in a report combining the state-of-art literature review and project results, if carried out.

The students work independently on a study of selected topics in the field of Engineering Design. They start with a selection of the topic, identify scientific papers for the literature research and can define a small, related project. The results (e.g. state-of-the-art literature review and small project results where defined) are evaluated with respect to predefined criteria.
Prerequisites / NoticeStudents take this course in parallel to the Lecture "Grand Challenges in Engineering Design". A general meeting will be held in the beginning of the semester to propose topics for the studies. Studies are carried out individually and can be the pre-study for a Bachelor thesis.
151-3203-00LGrand Challenges in Engineering DesignW+1 credit3SP. Ermanni, M. Meboldt, K. Shea
AbstractThe course is structured in three main blocks, each of them addressing a specific grand challenge in engineering design. Each block is composed of an introductory lecture and two to three invited talks, considering a good mix between speakers coming from academia and industry. Each talk is introduced and moderated by the students.
ObjectiveThe aim of the course is to introduce students to the engineering design research and practice in a multitude of Mechanical Engineering disciplines and convey knowledge from both academia and industry about state of the art methods, tools and processes.
ContentThe students are exposed to a variety of topics in the field of Engineering Design. Topics are bundled in three main grand challenges and include an introductory lecture held by one of the responsible Professors and 2-3 invited talks of 45 min. each, addressing specific issues. The success of the course is largely dependant on active involvement of the students. Accordingly, a small group of students (1-3) is asked to introduce and moderate each external talk. The group will therefore gather adequate information about the speaker and topic, read and synthesize relevant documents and scientific papers, prepare questions to motivate the interaction with the audience and summarize, at the end of the lecture, the discussed points and outcome.
Prerequisites / NoticeOffered in English and German
151-3207-00LLightweightW+4 credits4GP. Ermanni
AbstractThe elective course Lightweight includes numerical methods for the analysis of the load carrying and failure behavior of lightweight structures, as well as construction methods and design principles for lightweight design.
ObjectiveThe goal of this course is to convey substantiated background for the understanding and the design and sizing of modern lightweight structures in mechanical engineering, vehicle and airplane design.
ContentLightweight design
Thin-walled beams and structures
Instability behavior of thin walled structures
Reinforced shell structures
Load introduction in lightweight structures
Joining technology
Sandwich design
Lecture notesScript, Handouts, Exercises
151-3209-00LEngineering Design Optimization Restricted registration - show details
Number of participants limited to 35.
W4 credits4GK. Shea, T. Stankovic
AbstractThe course covers fundamentals of computational optimization methods in the context of engineering design. It develops skills to formally state and model engineering design tasks as optimization problems and select appropriate methods to solve them.
ObjectiveThe lecture and exercises teach the fundamentals of optimization methods in the context of engineering design. After taking the course students will be able to express engineering design problems as formal optimization problems. Students will also be able to select and apply a suitable optimization method given the nature of the optimization model. They will understand the links between optimization and engineering design in order to design more efficient and performance optimized technical products. The exercises are MATLAB based.
Content1. Optimization modeling and theory 2. Unconstrained optimization methods 2. Constrained optimization methods - linear and non-linear 4. Direct search methods 5. Stochastic and evolutionary search methods 6. Multi-objective optimization
Lecture notesavailable on Moodle
327-0501-00LMetals IW3 credits2V + 1UR. Spolenak
AbstractRepetition and advancement of dislocation theory. Mechanical properties of metals: hardening mechanisms, high temperature plasticity, alloying effects. Case studies in alloying to illustrate the mechanisms.
ObjectiveRepetition and advancement of dislocation theory. Mechanical properties of metals: hardening mechanisms, high temperature plasticity, alloying effects. Case studies in alloying to illustrate the mechanisms.
ContentDislocation theory:
Properties of dislocations, motion and kinetics of dislocations, dislocation-dislocation and dislocation-boundary interactions, consequences of partial dislocations, sessile dislocations
Hardening theory:
a. solid solution hardening: case studies in copper-nickel and iron-carbon alloys
b. particle hardening: case studies on aluminium-copper alloys
High temperature plasticity:
thermally activated glide
power-law creep
diffusional creep: Coble, Nabarro-Herring
deformation mechanism maps
Case studies in turbine blades
alloying effects
LiteratureGottstein, Physikalische Grundlagen der Materialkunde, Springer Verlag
Haasen, Physikalische Metallkunde, Springer Verlag
Rösler/Harders/Bäker, Mechanisches Verhalten der Werkstoffe, Teubner Verlag
Porter/Easterling, Transformations in Metals and Alloys, Chapman & Hall
Hull/Bacon, Introduction to Dislocations, Butterworth & Heinemann
Courtney, Mechanical Behaviour of Materials, McGraw-Hill
327-1204-00LMaterials at Work IW4 credits4SR. Spolenak, E. Dufresne, R.  Koopmans
AbstractThis course attempts to prepare the student for a job as a materials engineer in industry. The gap between fundamental materials science and the materials engineering of products should be bridged. The focus lies on the practical application of fundamental knowledge allowing the students to experience application related materials concepts with a strong emphasis on case-study mediated learning.
ObjectiveTeaching goals:

to learn how materials are selected for a specific application

to understand how materials around us are produced and manufactured

to understand the value chain from raw material to application

to be exposed to state of the art technologies for processing, joining and shaping

to be exposed to industry related materials issues and the corresponding language (terminology) and skills

to create an impression of how a job in industry "works", to improve the perception of the demands of a job in industry
ContentThis course is designed as a two semester class and the topics reflect the contents covered in both semesters.

Lectures and case studies encompass the following topics:

Strategic Materials (where do raw materials come from, who owns them, who owns the IP and can they be substituted)
Materials Selection (what is the optimal material (class) for a specific application)
Materials systems (subdivisions include all classical materials classes)
Joining (assembly)
Materials and process scaling (from nm to m and vice versa, from mg to tons)
Sustainable materials manufacturing (cradle to cradle) Recycling (Energy recovery)

After a general part of materials selection, critical materials and materials and design four parts consisting of polymers, metals, ceramics and coatings will be addressed.

In the fall semester the focus is on the general part, polymers and alloy case studies in metals. The course is accompanied by hands-on analysis projects on everyday materials.
LiteratureManufacturing, Engineering & Technology
Serope Kalpakjian, Steven Schmid
ISBN: 978-0131489653
Prerequisites / NoticeProfound knowledge in Physical Metallurgy and Polymer Basics and Polymer Technology required (These subjects are covered at the Bachelor Level by the following lectures: Metalle 1, 2; Polymere 1,2)
  •  Page  1  of  1