Autumn Semester 2020 takes place in a mixed form of online and classroom teaching.
Please read the published information on the individual courses carefully.

Search result: Courses in Spring Semester 2017

Mechanical Engineering Bachelor Information
6. Semester
Focus Specialization
Manufacturing Science
Focus Coordinator: Prof. Konrad Wegener
To achieve the required 20 credit points for the focus specialization you need to pass all 3 compulsory courses (HS/FS). The other 8 credit points can be achieved from the elective courses.
Elective Courses
NumberTitleTypeECTSHoursLecturers
151-0304-00LEngineering Design II Information W4 credits4G
151-0304-00 GDimensionieren II
Vorlesung: MI, 8-10
Übungen: MI, 10-12
4 hrs
Wed08-10ML H 44 »
10-12HG D 3.1 »
10-12HG D 5.1 »
10-12IFW A 34 »
10-12IFW B 42 »
10-12IFW C 31 »
10-12IFW C 33 »
10-12ML J 34.1 »
10-12ML J 34.3 »
K. Wegener
151-0306-00LVisualization, Simulation and Interaction - Virtual Reality I Information W+4 credits4G
151-0306-00 GVisualization, Simulation and Interaction - Virtual Reality I
Start in the second week of the Semester.
4 hrs
Thu13-17ML H 44 »
A. Kunz
151-0516-00LNon-smooth DynamicsW+5 credits5G
151-0516-00 GNicht-glatte Dynamik5 hrs
Mon12-14HG E 1.1 »
Tue09-10ML F 34 »
12-14HG E 1.1 »
C. Glocker
151-0540-00LExperimental Mechanics Information W4 credits2V + 1U
151-0540-00 VExperimentelle Mechanik2 hrs
Fri10-12ML F 39 »
J. Dual
151-0540-00 UExperimentelle Mechanik1 hrs
Fri12-13ML F 39 »
J. Dual
151-0630-00LNanorobotics Information W4 credits2V + 1U
151-0630-00 VNanorobotics2 hrs
Tue10-12ML F 36 »
06.06.10-12ML F 36 »
S. Pané Vidal, B. Nelson
151-0630-00 UNanorobotics1 hrs
Thu10-11CHN C 14 »
S. Pané Vidal, B. Nelson
151-0641-00LIntroduction to Robotics and Mechatronics Information Restricted registration - show details
Number of participants limited to 60.

Enrollment is only valid through registration on the MSRL Website (www.msrl.ethz.ch) and will open on 12 December 2016. Registration per e-mail is no longer accepted!
W4 credits2V + 2U
151-0641-00 VIntroduction to Robotics and Mechatronics
Permission from lecturers required for all students.
2 hrs
Mon16-18ML F 38 »
10.04.16-18ML D 28 »
B. Nelson
151-0641-00 UIntroduction to Robotics and Mechatronics
Permission from lecturers required for all students.
A choice of four different time slots is arranged for the exercise session in a goup room.
The students will be informed about it during the enrollment process.
2 hrs
29.05.16-18ML F 36 »
B. Nelson
151-0718-00LMetrology for Production - Metrology of WorkpiecesW+4 credits2V + 2U
151-0718-00 VQualitätssicherung - Werkstückmesstechnik2 hrs
Mon10-12ML H 34.3 »
16.03.08-10ML J 37.1 »
23.03.08-10ML J 37.1 »
27.04.08-10ML J 37.1 »
A. Günther
151-0718-00 UQualitätssicherung - Werkstückmesstechnik2 hrs
Thu10-12ML H 34.3 »
27.03.08-10ML H 34.3 »
08.05.08-10ML H 34.3 »
A. Günther
151-0735-00LDynamic Behavior of Materials and StructuresW4 credits2V + 2U
151-0735-00 VDynamic Behavior of Materials and Structures
Does not take place this semester.
2 hrsD. Mohr
151-0735-00 UDynamic Behavior of Materials and Structures
Does not take place this semester.
2 hrsD. Mohr
151-0802-00LAutomation TechnologyW+4 credits2V + 1U
151-0802-00 VAutomation Technology2 hrs
Mon14-16LFV E 41 »
H. Wild, K. Wegener
151-0802-00 UAutomation Technology1 hrs
Mon16-17LFV E 41 »
H. Wild, K. Wegener
151-0834-00LForming Technology II - Introduction Virtual Process Modelling Information W+4 credits2V + 2U
151-0834-00 VUmformtechnik II - Numerische Simulationsverfahren2 hrs
Thu08-10CLA E 4 »
P. Hora
151-0834-00 UUmformtechnik II - Numerische Simulationsverfahren
Die Übung beginnt in der zweiten Semesterwoche.
2 hrs
Wed14-16CLA F 2 »
P. Hora
151-0836-00LVirtual Process Control in Forming Manufacturing Systems Information W+5 credits2V + 2U
151-0836-00 VMethoden der virtuellen Prozessauslegung umformtechnischer Systeme2 hrs
Mon10-12CLA E 4 »
P. Hora
151-0836-00 UMethoden der virtuellen Prozessauslegung umformtechnischer Systeme2 hrs
Tue15-17CLA F 2 »
P. Hora
151-0840-00LPrinciples of FEM-Based Optimization and Robustness Analysis Information W+5 credits2V + 2U
151-0840-00 VPrinciples of FEM-Based Optimization and Robustness Analysis2 hrs
Fri08-10CLA E 4 »
B. Berisha, P. Hora, N. Manopulo
151-0840-00 UPrinciples of FEM-Based Optimization and Robustness Analysis
If required two dates for exercises will be offered.

Bei Bedarf werden zwei Übungstermine angeboten.
2 hrs
Fri10-12CLA F 2 »
B. Berisha, P. Hora, N. Manopulo
151-1224-00LOil-Hydraulics and PneumaticsW4 credits2V + 2U
151-1224-00 VÖlhydraulik und Pneumatik2 hrs
Wed08-10ML F 39 »
31.05.10-13IFW A 36 »
J.  Lodewyks, K. Wegener
151-1224-00 UÖlhydraulik und Pneumatik2 hrs
Wed10-12ML F 39 »
J.  Lodewyks, K. Wegener
227-0516-01LElectrical Drive Systems I Information W6 credits4G
227-0516-01 GElektrische Antriebssysteme I4 hrs
Tue13-17ETF E 1 »
P. Steimer, A. Omlin, C. A. Stulz
  •  Page  1  of  1