Suchergebnis: Katalogdaten im Herbstsemester 2017

Bauingenieurwissenschaften Master Information
3. Semester
Vertiefungsfächer
Vertiefung in Konstruktion
NummerTitelTypECTSUmfangDozierende
101-0119-00LMauerwerk Information W3 KP2GN. Mojsilovic
KurzbeschreibungKenntnisse des Tragverhaltens von Mauerwerk und seiner Komponenten.
Zweckmässige Anwendung von theoretischen Ansätzen bei der Bemessung und konstruktiven Durchbildung von Mauerwerkstragwerken.
Praktischer Umgang mit Mauerwerk anhand von Übungen.
LernzielErwerbung der Kenntnisse des Tragverhaltens von Mauerwerk und seiner Komponenten.
Befähigung zur zweckmässigen Anwendung von theoretischen Ansätzen bei der Bemessung und konstruktiven Durchbildung von Mauerwerkstragwerken.
Befähigung zum praktischen Umgang mit Mauerwerk anhand von Übungen.
InhaltEntwicklung des Mauerwerkbaus
Konstruktion und Ausführung
Baustoffe
Tragverhalten und Modellbildung
Tragwerksanalyse und Bemessung
Bewehrtes Mauerwerk
Seismisches Verhalten
SkriptVorlesungsnotizen
Literatur"Mauerwerk", Zimmerli Bruno, Schwartz Joseph und Schwegler Gregor, Birkhäuser Verlag Basel, 1999
"Mauerwerk, Bemessungsbeispiele zur Norm SIA 266", SIA Dokumentation D0257, 2015
"Mauerwerk", Norm SIA 266, 2015
"Mauerwerk - Ergänzende Festlegungen", Norm SIA 266/1, 2015
Voraussetzungen / BesonderesStahlbeton III
101-0129-00LErhaltung von TragwerkenW3 KP2GT. Vogel
KurzbeschreibungBehandlung des Themenkreises primär aus der Sicht des projektierenden Ingenieurs eines Einzelbauwerks.
Erarbeitung einer systematischen Vorgehensweise für Erhaltungsprojekte.
Vertiefung im Massivbau und Erweiterung auf andere Bauweisen.
Sichtbarmachung der Schnittstellen mit Bauherr, Architekt, Unternehmer und Spezialisten.
LernzielBehandlung des Themenkreises primär aus der Sicht des projektierenden Ingenieurs eines Einzelbauwerks.
Erarbeitung einer systematischen Vorgehensweise für Erhaltungsprojekte.
Vertiefung im Massivbau und Erweiterung auf andere Bauweisen.
Sichtbarmachung der Schnittstellen mit Bauherr, Architekt, Unternehmer und Spezialisten.
InhaltSystematik der Erhaltung, Überprüfung (Zustandserfassung, Zustandsbeurteilung, Massnahmenempfehlung), zerstörungsfreie Prüfmethoden, rechnerische Untersuchungen, Natursteinmauerwerk, Verstärkungsmassnahmen (insb. Klebebewehrung)
SkriptAutographieblätter
LiteraturNormen SIA 269, 269/1 bis 269/6,
SIA-Dokumentationen D 0239 und D 0240 der Einführungskurse
101-0149-00LFlächentragwerkeW3 KP2GT. Vogel, S. Fricker
KurzbeschreibungGrundzüge des Tragverhaltens von Flächentragwerken
LernzielVerständnis des Tragverhaltens von Flächentragwerken in den wichtigsten Grundzügen; Kenntnis typischer Anwendungen in verschiedenen Materialien; Fähigkeit, Resultate numerischer Berechnungen vernünftig interpretieren und kontrollieren zu können; Eröffnung des Zugangs zur Fachliteratur.
InhaltElastische Scheiben (kartesische und Polarkoordinaten)
Kinematik Scheiben
Faltwerke
Kirchhoffsche Platten
Rotationssymmetrische Platten
Dünne elastische Platten mit grosssen Durchbiegungen
Geometrie der gekrümmten Fläche
Schalen (Grundlagen, Membrantheorie, Biegetheorie, Formfindung)
SkriptAutographie "Flächentragwerke"
LiteraturEmpfohlen:
- Girkmann, K.: "Flächentragwerke", Springer-Verlag, Wien, 1963, 632 pp.
- Flügge, S.: "Stresses in Shells", Springer-Verlag, Berlin, 1967, 499 pp.
- Hake, E. ; Meskouris,K. : "Statik der Flächentragwerke", Springer-Verlag, Berlin, 2001
- Timoshenko, S.P.; Woinowsky-Krieger, S.: "Theory of Plates and Shells", McGraw-Hill, New-York, 1959, 580 pp.
101-0159-00LMethod of Finite Elements IIW3 KP2GE. Chatzi, G. Abbiati, K. Agathos
KurzbeschreibungBasic theoretical and procedural concepts of the method of finite elements (FE) for the analysis of
- Plasticity
- Large Displacement Problems
- Fracture Mechanics
- Nonlinear Dynamics
- Thermomechanics
LernzielThe class overviews advanced topics of the Method of Finite Elements, beyond linear elasticity. The concepts are introduced via theory, numerical examples, demonstrators and computer labs.

See the class webpage for more information:
Link
SkriptHandouts, Course Script available on Link
LiteraturCourse Script available on Link

Useful (optional) Reading:
- Nonlinear Finite Elements of Continua and Structures, T. Belytschko, W.K. Liu, and B. Moran.
- Bathe, K.J., Finite Element Procedures, Prentice Hall, 1996.
- Crisfield, M.A., Remmers, J.J. and Verhoosel, C.V., 2012. Nonlinear finite element analysis of solids and structures. John Wiley & Sons.
- De Souza Neto, E.A., Peric, D. and Owen, D.R., 2011. Computational methods for plasticity: theory and applications. John Wiley & Sons.
101-0169-00LHolzbau II Belegung eingeschränkt - Details anzeigen
Voraussetzung: Holzbau I (101-0168-00L)
W3 KP2GA. Frangi, R. Jockwer, M. Klippel, R. Steiger
KurzbeschreibungVerständnis der theoretischen Grundlagen und der konstruktiven Belange des Ingenieur-Holzbaus. Erkennen der holzspezifischen Besonderheiten, insbesondere der Anisotropie, der Schwind- und Quellverformungen und der Langzeiteinflüsse sowie deren konstruktive und bemessungstechnische Bewältigung. Entwurf, Konstruktion und Bemessung von Dach-, Hallen- und Brückenbauten.
LernzielVerständnis und Anwendung der theoretischen Grundlagen und der konstruktiven Belange des Ingenieur-Holzbaus. Erkennen der holzspezifischen Besonderheiten, insbesondere der Anisotropie, der Schwind- und Quellverformungen und der Langzeiteinflüsse, sowie deren konstruktive und bemessungstechnische Bewältigung. Bemessung von Dach-, Hallen- und Brückenbauten.
InhaltAnwendungsgebiete des Holzbaus (materialspezifische Merkmale und deren Auswirkung auf die Konstruktionsweise); Holz als Baustoff (Aufbau des Holzes, Sortierung, physikalische und mechanische Eigenschaften von Holz und Holzwerkstoffen); Dauerhaftigkeit und konstruktiver Holzschutz; Bemessungsgrundlagen und Verbindungen (Verleimung, Nägel, Dübel, Bolzen, Schrauben); Bauteile und wichtigste ebene und räumliche Tragwerke (Berechnung und Bemessung unter Beachtung nachgiebiger Verbindungen); besondere konstruktive Belange des Dach-, Hallen- und Brückenbaus.
SkriptAutographie Holzbau
Folienkopien
LiteraturHolzbautabellen HBT 1, Lignum (2012)
Norm SIA 265 (2012)
Norm SIA 265/1 (2009)
Voraussetzungen / BesonderesHolzbau I
101-0189-00LSeismic Design of Structures IIW3 KP2GB. Stojadinovic
KurzbeschreibungThe following advanced topics are covered: 1) behavior and non-linear response of structural systems under earthquake excitation; 2) seismic behavior and design of moment frame, braced frame, shear wall and masonry structures; 3) fundamentals of seismic isolation; and 4) assessment and retrofit of existing buildings. These topics are discussed in terms of performance-based seismic design.
LernzielAfter successfully completing this course the students will be able to:
1. Use the knowledge of nonlinear dynamic response of structures to interpret the design code provisions and apply them in seismic design structural systems.
2. Explain the seismic behavior of moment frame, braced frame and shear wall structural systems and successfully design such systems to achieve the performance objectives stipulated by the design codes.
3. Determine the performance of structures under earthquake loading using modern performance assessment methods and analysis tools.
InhaltThis course completes the series of two courses on seismic design of structures at ETHZ. Building on the material covered in Seismic Design of Structures I, the following advanced topics will be covered in this course: 1) behavior and non-linear response of structural systems under earthquake excitation; 2) seismic behavior and design of moment frame, braced frame and shear wall structures; 3) fundamentals of seismic isolation; and 4) assessment and retrofit of existing buildings. These topics will be discussed from the standpoint of performance-based design.
SkriptThe electronic copies of the learning material will be uploaded to ILIAS and available through myStudies. The learning material includes the lecture presentations, additional reading, and exercise problems and solutions.
LiteraturEarthquake Engineering: From Engineering Seismology to Performance-Based Engineering, Yousef Borzorgnia and Vitelmo Bertero, Eds., CRC Press, 2004

Dynamics of Structures: Theory and Applications to Earthquake Engineering, 4th edition, Anil Chopra, Prentice Hall, 2014

Erdbebensicherung von Bauwerken, 2nd edition, Hugo Bachmann, Birkhäuser, Basel, 2002
Voraussetzungen / BesonderesETH Seismic Design of Structures I course, or equivalent. Students are expected to understand the seismological nature of earthquakes, to characterize the ground motion excitation, to analyze the response of elastic single- and multiple-degree-of-freedom systems to earthquake excitation, to use the concept of response and design spectrum, to compute the equivalent seismic loads on simple structures, and to perform code-based seismic design of simple structures. Familiarity with structural analysis software, such as SAP2000, and general-purpose numerical analysis software, such as Matlab, is expected.
101-0179-00LProbabilistic Seismic Risk Analysis and Management for Civil Systems
Findet dieses Semester nicht statt.
W3 KP2GB. Stojadinovic, Noch nicht bekannt
KurzbeschreibungAdvanced topics covered in this course are: 1) probabilistic seismic hazard analysis; 2) probabilistic seismic risk analysis; 3) seismic risk management using structural and financial engineering means; and, time permitting, 4) advanced topics in systemic probabilistic risk evaluation.
LernzielAfter successfully completing this course the students will be able to:

1. Gather the necessary data and conduct a probabilistic seismic hazard analysis for a site.
2. Gather the necessary data and conduct a probabilistic vulnerability analysis of a building or an element of a civil infrastructure system at a site.
3. Design structural and/or financial engineering solutions to mitigate the seismic risk at a site.
InhaltThis course extends the series of two courses on seismic design of structures at ETHZ and introduces the topic of probabilistic seismic risk analysis and seismic risk management for the build environment and civil infrastructure systems. The following advanced topics will be covered in this course: 1) probabilistic seismic hazard analysis; 2) probabilistic seismic risk analysis; 3) seismic risk management using structural and financial engineering means; and, time permitting, 4) advanced topics in systemic probabilistic risk evaluation.
SkriptThe electronic copies of the learning material will be uploaded to ILIAS and available through myStudies. This will include the lecture notes, additional reading, and exercise problems and solutions. There is no textbook for this course.
LiteraturReading material:
- Jack R Benjamin, C. Allin Cornell (2014) Probability, Statistics, and Decision for Civil Engineers
- A. H-S. Ang (Author), W. H. Tang Probability Concepts in Engineering: Emphasis on Applications to Civil and Environmental Engineering
- P.E. Pinto, R. Giannini and P. Franchin (2004) Seismic reliability analysis of structures, IUSSPress. Pavia;
- McGuire, R.K. 2004. Seismic hazard and risk analysis: EERI Monograph MNO-10, Earthquake Engineering Research Institute.
- A Mc. Neil, R. Frey and P. Embrechts, Quantitative Risk Management, Concepts, Techniques and Tools, Princeton University Press, 2015
- R. Rees, A. Wambach, The Microeconomics of Insurance, Foundations and Trends in Microeconomics, Vol. 4, Mps. 1-2 (2008), pp. 1- 163, DOI: 10.1561/0700000023
- Earthquake Engineering: From Engineering Seismology to Performance-Based Engineering, Yousef Borzorgnia and Vitelmo Bertero, Eds., CRC Press, 2004
- Dynamics of Structures: Theory and Applications to Earthquake Engineering, 4th edition, Anil Chopra, Prentice Hall, 2012
- Erdbebensicherung von Bauwerken, 2nd edition, Hugo Bachmann, Birkhäuser, Basel, 2002

References:
-Norm SIA 261: Einwirkungen auf Tragwerke (Actions on Structures). Schweizerischer Ingenieur- und Architekten-Verein, Zürich, 2003

Software:
- Bispec: software for unidirectional and bidirectional dynamic time-history and spectral seismic analysis of a simple dynamic system. Link
- SAP2000 v15.1: general-purpose 3D nonlinear structural analysis software. Link
- OpenSees: Open System for Earthquake Engineering Simulation, is an object-oriented, open- source software framework. Link
Voraussetzungen / BesonderesETH Seismic Design of Structures I course (101-0188-00), or equivalent. Students are expected to understand the seismological nature of earthquakes, to characterize the ground motion excitation, to analyze the response of elastic single- and multiple-degree-of-freedom systems to earthquake excitation, to use the concept of response and design spectrum, to compute the equivalent seismic loads on simple structures, and to perform code-based seismic design of simple structures.
  •  Seite  1  von  1