Suchergebnis: Katalogdaten im Frühjahrssemester 2021

Maschineningenieurwissenschaften Bachelor Information
6. Semester
Fokus-Vertiefung
Energy, Flows and Processes
Fokus-Koordinator: Prof. Christoph Müller
Für die erforderlichen 20 KP der Fokus-Vertiefung Energy, Flows and Processes müssen mindestens 2 Kernfächer (W+) (HS/FS) und mindestens 2 der Wahlfächer (HS/FS) gemäss der Präsentation der Fokus-Vertiefung Energy, Flows and Processes (siehe Link) gewählt werden. 1 Kurs kann frei aus dem gesamten Angebot aller D-MAVT Studiengänge (Bachelor und Master) gewählt werden.
NummerTitelTypECTSUmfangDozierende
151-0206-00LEnergy Systems and Power EngineeringW+4 KP2V + 2UR. S. Abhari, A. Steinfeld
KurzbeschreibungIntroductory first course for the specialization in ENERGY. The course provides an overall view of the energy field and pertinent global problems, reviews some of the thermodynamic basics in energy conversion, and presents the state-of-the-art technology for power generation and fuel processing.
LernzielIntroductory first course for the specialization in ENERGY. The course provides an overall view of the energy field and pertinent global problems, reviews some of the thermodynamic basics in energy conversion, and presents the state-of-the-art technology for power generation and fuel processing.
InhaltWorld primary energy resources and use: fossil fuels, renewable energies, nuclear energy; present situation, trends, and future developments. Sustainable energy system and environmental impact of energy conversion and use: energy, economy and society. Electric power and the electricity economy worldwide and in Switzerland; production, consumption, alternatives. The electric power distribution system. Renewable energy and power: available techniques and their potential. Cost of electricity. Conventional power plants and their cycles; state-of-the-art and advanced cycles. Combined cycles and cogeneration; environmental benefits. Solar thermal; concentrated solar power; solar photovoltaics. Fuel cells: characteristics, fuel reforming and combined cycles.
SkriptVorlesungsunterlagen werden verteilt
151-0208-00LComputational Methods for Flow, Heat and Mass Transfer ProblemsW+4 KP4GD. W. Meyer-Massetti
KurzbeschreibungEs werden numerische Methoden zur Lösung von Problemen der Fluiddynamik, Energie- & Verfahrenstechnik dargestellt und anhand von analytischen & numerischen Beispielen illustriert.
LernzielKenntnisse und praktische Erfahrung mit der Anwendung von Diskretisierungs- und Lösungsverfahren für Problem der Fluiddynamik und der Energie- und Verfahrenstechnik
Inhalt- Einleitung mit Anwendungen, Schritte zur numerischen Lösung
- Klassifizierung partieller Differentialgleichungen, Beispiele aus Anwendungen
- Finite Differenzen
- Finite Volumen
- Methoden der gewichteten Residuen, Spektralmethoden, finite Elemente
- Stabilitätsanalyse, Konsistenz, Konvergenz
- Numerische Lösungsverfahren, lineare Löser
Der Stoff wird mit Beispielen aus der Praxis illustriert.
SkriptFolien zur Ergänzung während der Vorlesung werden ausgegeben.
LiteraturReferenzen werden in der Vorlesung angegeben. Notizen in guter Übereinstimmung mit der Vorlesung stehen zur Verfügung.
Voraussetzungen / BesonderesGrundlagen in Fluiddynamik, Thermodynamik und Programmieren (Vorlesung: "Models, Algorithms and Data: Introduction to Computing")
151-0928-00LCO2 Capture and Storage and the Industry of Carbon-Based ResourcesW4 KP3GM. Mazzotti, A. Bardow, P. Eckle, N. Gruber, M. Repmann, T. Schmidt, D. Sutter
KurzbeschreibungCarbon-based resources (coal, oil, gas): origin, production, processing, resource economics. Climate change: science, policies. CCS systems: CO2 capture in power/industrial plants, CO2 transport and storage. Besides technical details, economical, legal and societal aspects are considered (e.g. electricity markets, barriers to deployment).
LernzielThe goal of the lecture is to introduce carbon dioxide capture and storage (CCS) systems, the technical solutions developed so far and the current research questions. This is done in the context of the origin, production, processing and economics of carbon-based resources, and of climate change issues. After this course, students are familiar with important technical and non-technical issues related to use of carbon resources, climate change, and CCS as a transitional mitigation measure.

The class will be structured in 2 hours of lecture and one hour of exercises/discussion. At the end of the semester a group project is planned.
InhaltBoth the Swiss and the European energy system face a number of significant challenges over the coming decades. The major concerns are the security and economy of energy supply and the reduction of greenhouse gas emissions. Fossil fuels will continue to satisfy the largest part of the energy demand in the medium term for Europe, and they could become part of the Swiss energy portfolio due to the planned phase out of nuclear power. Carbon capture and storage is considered an important option for the decarbonization of the power sector and it is the only way to reduce emissions in CO2 intensive industrial plants (e.g. cement- and steel production).
Building on the previously offered class "Carbon Dioxide Capture and Storage (CCS)", we have added two specific topics: 1) the industry of carbon-based resources, i.e. what is upstream of the CCS value chain, and 2) the science of climate change, i.e. why and how CO2 emissions are a problem.
The course is devided into four parts:
I) The first part will be dedicated to the origin, production, and processing of conventional as well as of unconventional carbon-based resources.
II) The second part will comprise two lectures from experts in the field of climate change sciences and resource economics.
III) The third part will explain the technical details of CO2 capture (current and future options) as well as of CO2 storage and utilization options, taking again also economical, legal, and sociatel aspects into consideration.
IV) The fourth part will comprise two lectures from industry experts, one with focus on electricity markets, the other on the experiences made with CCS technologies in the industry.
Throughout the class, time will be allocated to work on a number of tasks related to the theory, individually, in groups, or in plenum. Moreover, the students will apply the theoretical knowledge acquired during the course in a case study covering all the topics.
SkriptPower Point slides and distributed handouts
LiteraturIPCC Special Report on Global Warming of 1.5°C, 2018.
Link

IPCC AR5 Climate Change 2014: Synthesis Report, 2014. Link

IPCC Special Report on Carbon dioxide Capture and Storage, 2005. Link

The Global Status of CCS: 2014. Published by the Global CCS Institute, Nov 2014.
Link
Voraussetzungen / BesonderesExternal lecturers from the industry and other institutes will contribute with specialized lectures according to the schedule distributed at the beginning of the semester.
151-0946-00LMacromolecular Engineering: Networks and GelsW4 KP4GM. Tibbitt
KurzbeschreibungThis course will provide an introduction to the design and physics of soft matter with a focus on polymer networks and hydrogels. The course will integrate fundamental aspects of polymer physics, engineering of soft materials, mechanics of viscoelastic materials, applications of networks and gels in biomedical applications including tissue engineering, 3D printing, and drug delivery.
LernzielThe main learning objectives of this course are: 1. Identify the key characteristics of soft matter and the properties of ideal and non-ideal macromolecules. 2. Calculate the physical properties of polymers in solution. 3. Predict macroscale properties of polymer networks and gels based on constituent chemical structure and topology. 4. Design networks and gels for industrial and biomedical applications. 5. Read and evaluate research papers on recent research on networks and gels and communicate the content orally to a multidisciplinary audience.
SkriptClass notes and handouts.
LiteraturPolymer Physics by M. Rubinstein and R.H. Colby; samplings from other texts.
Voraussetzungen / BesonderesPhysics I+II, Thermodynamics I+II
151-0966-00LIntroduction to Quantum Mechanics for EngineersW4 KP2V + 2UD. J. Norris
KurzbeschreibungThis course provides fundamental knowledge in the principles of quantum mechanics and connects it to applications in engineering.
LernzielTo work effectively in many areas of modern engineering, such as renewable energy and nanotechnology, students must possess a basic understanding of quantum mechanics. The aim of this course is to provide this knowledge while making connections to applications of relevancy to engineers. After completing this course, students will understand the basic postulates of quantum mechanics and be able to apply mathematical methods for solving various problems including atoms, molecules, and solids. Additional examples from engineering disciplines will also be integrated.
InhaltFundamentals of Quantum Mechanics
- Historical Perspective
- Schrödinger Equation
- Postulates of Quantum Mechanics
- Operators
- Harmonic Oscillator
- Hydrogen atom
- Multielectron Atoms
- Crystalline Systems
- Spectroscopy
- Approximation Methods
- Applications in Engineering
SkriptClass Notes and Handouts
LiteraturText: David J. Griffiths and Darrell F. Schroeter, Introduction to Quantum Mechanics, 3rd Edition, Cambridge University Press.
Voraussetzungen / BesonderesAnalysis III, Mechanics III, Physics I, Linear Algebra II
Mechatronics
Fokus-Koordinator: Prof. Marco Hutter
Für die erforderlichen 20 KP der Fokus-Vertiefung Mechatronics ist 151-0640-00L Studies on Mechatronics obligatorisch.
NummerTitelTypECTSUmfangDozierende
151-0640-00LStudies on Mechatronics
Die Professoren, die Studies on Mechatronics betreuen, sind im myStudies bei Belegung des Fachs wählbar.
Für Ausnahmen bitte den Fokus Koordinator und Link kontaktieren.
Dieser Kurs steht für Austauschstudierende nicht zur Verfügung.
O5 KP11ABetreuer/innen
KurzbeschreibungOverview of Mechatronics topics and study subjects. Identification of minimum 10 pertinent refereed articles or works in the literature in consultation with supervisor or instructor. After 4 weeks, submission of a 2-page proposal outlining the value, state-of-the art and study plan based on these articles. After feedback on the substance and technical writing by the instructor, project commences.
LernzielThe goal of this class is to familiarize the students with this fascinating but rapidly evolving engineering discipline. The students learn to find, read and critically evaluate the pertinent literature and methods through in depth studying, presenting, debating of and writing about selected topics or case studies addressing mechatronics engineering.
InhaltOverview of Mechatronics topics and study subjects. Identification of minimum ten pertinent refereed articles or works in the literature in consultation with supervisor orinstructor. After four weeks, submission of a 2-page proposal outlining the value, state-of-the art and study plan based on these articles. After detailed feedback on the substance and technical writing on the proposal by the instructor, project commences. Three to four weeks prior to the end of the semester, a 15 minute oral progress report (presentation) is given by the student that is critiqued by the instructor with detailed comments on substance and effectiveness of lecture and response on questions from audience. At the last day of the semester the student submits a written report that is no longer than 10-pages text following the format of a representative journal article. Throughout the semester the student attends and actively participates in the interactive class lectures given in the form of seminars and debates with active question and answer sessions inviting student and instructor participation.
LiteraturWill be available.
Voraussetzungen / BesonderesLanguage: English or German - depending on the lecturer.
151-0206-00LEnergy Systems and Power EngineeringW4 KP2V + 2UR. S. Abhari, A. Steinfeld
KurzbeschreibungIntroductory first course for the specialization in ENERGY. The course provides an overall view of the energy field and pertinent global problems, reviews some of the thermodynamic basics in energy conversion, and presents the state-of-the-art technology for power generation and fuel processing.
LernzielIntroductory first course for the specialization in ENERGY. The course provides an overall view of the energy field and pertinent global problems, reviews some of the thermodynamic basics in energy conversion, and presents the state-of-the-art technology for power generation and fuel processing.
InhaltWorld primary energy resources and use: fossil fuels, renewable energies, nuclear energy; present situation, trends, and future developments. Sustainable energy system and environmental impact of energy conversion and use: energy, economy and society. Electric power and the electricity economy worldwide and in Switzerland; production, consumption, alternatives. The electric power distribution system. Renewable energy and power: available techniques and their potential. Cost of electricity. Conventional power plants and their cycles; state-of-the-art and advanced cycles. Combined cycles and cogeneration; environmental benefits. Solar thermal; concentrated solar power; solar photovoltaics. Fuel cells: characteristics, fuel reforming and combined cycles.
SkriptVorlesungsunterlagen werden verteilt
151-0516-00LNicht-glatte Dynamik
Diese Lerneinheit wird zum letzten Mal im FS21 angeboten.
W5 KP5GC. Glocker
KurzbeschreibungUngleichungsprobleme in der Dynamik, speziell Reib- und Stoßprobleme mit Geschwindigkeits- und Beschleunigungssprüngen. Modellierung von einseitigen Kontakten, Reibung, Freiläufen, vorgespannten Federn. Formulierung über mengenwertige Funktionen als lineare Komplementaritätsprobleme. Numerische Zeitintegration des kombinierten Reib-Stoss-Kontaktproblems.
LernzielDie Vorlesung vermittelt den Studierenden einen Einstieg in die moderne Behandlung von Ungleichungsproblemen in der Dynamik. Der Vorlesungsstoff ist speziell auf reibungsbehaftete Kontakte in der Mechanik zugeschnitten, läßt sich aber strukturell auf eine große Klasse von Ungleichungsproblemen in den technischen Wissenschaften übertragen. Ziel der Veranstaltung ist es, die Studierenden mit einer konsistenten Erweiterung der klassischen Mechanik auf Systeme mit Unstetigkeiten vertraut zu machen, und den Umgang mit Ungleichungen in der Form von mengenwertigen Stoffgesetzen zu erlernen.
Inhalt1. Kinematik: Drehung, Geschwindigkeit, Beschleunigung, virtuelle Verschiebung.
2. Aufbau der Mechanik: Definition der Kraft, virtuelle Arbeit, innere und äussere Kräfte, Wechselwirkungsprinzip, Erstarrungsprinzip, mathematische Form des Freischneidens, Definition der idealen Bindung.
3. Starre Körper: Variationelle Form der Gleichgewichtsbedingungen, Systeme starrer Körper, Übergang auf Minimalkoordinaten.
4. Einfache generalisierte Kräfte: Generalisierte Kraftrichtungen, Kinematik der Kraftelemente, Kraftgesetze, Parallel- und Reihenschaltung.
5. Darstellung mengenwertiger Kraftgesetze: Normalkegel, proximale Punkte, exakte Regularisierung. Anwendung auf einseitige Kontakte und Coulomb-Reibgesetze.
6. Stossfreie und stossbehaftete Bewegung: Bewegungsgleichung, Stossgleichung, Newton-Stossgesetze, Diskussion von Mehrfachstössen, Kane's Paradoxon.
7. Numerische Behandlung: Lineares Komplementaritätsproblem (LCP), Zeitdiskretisierung nach Moreau, Kontaktproblem in lokalen Koordinaten als LCP.
SkriptEs gibt kein Vorlesungsskript. Den Studierenden wird empfohlen, eine eigene Mitschrift der Vorlesung anzufertigen. Ein Katalog mit Übungsaufgaben und den zugehörigen Musterlösungen wird ausgegeben.
Voraussetzungen / BesonderesKinematik und Statik & Dynamics
151-0540-00LExperimentelle MechanikW4 KP2V + 1UJ. Dual, T. Brack
Kurzbeschreibung1. Allgemeines: Messkette, Frequenzgang, Schwingungen und Wellen in kontinuierlichen Systemen, Modalanalyse, Statistik, Digitale Signalanalyse, Phasenregelkreis 2. Optische Methoden 3. Piezoelektrizität 4. Elektromagnetische Erzeugung und Messung von Schwingungen und Wellen 5. Kapazitive Messaufnehmer
LernzielVerständnis, quantitative Modellierung und praktische Anwendung von experimentellen Methoden zur Erzeugung und Messung von mechanischen Grössen (Bewegung, Deformation, Spannungen)
Inhalt1. Allgemeines: Messkette, Frequenzgang, Frequenzgangmessung, Schwingungen und Wellen in kontinuierlichen Systemen, Modalanalyse, Statistik, Digitale Signalanalyse, Phasenregelkreis 2. Optische Methoden (Akustooptische Modulation, Interferometrie, Holographie, Spannungsoptik, Schattenoptik, Moiré Methoden) 3. Piezoelektrische Materialien: Grundgleichungen, Anwendungen Beschleunigungsaufnehmer, Verschiebungsmessung) 4. Elektromagnetische Erzeugung und Messung von Schwingungen und Wellen 5. Kapazitive Messaufnehmer, Praktika und Uebungen
Skriptja
Voraussetzungen / BesonderesVoraussetzungen: Mechanik I bis III, Physik, Elektrotechnik
151-0630-00LNanorobotics Information W4 KP2V + 1US. Pané Vidal
KurzbeschreibungNanorobotics is an interdisciplinary field that includes topics from nanotechnology and robotics. The aim of this course is to expose students to the fundamental and essential aspects of this emerging field.
LernzielThe aim of this course is to expose students to the fundamental and essential aspects of this emerging field. These topics include basic principles of nanorobotics, building parts for nanorobotic systems, powering and locomotion of nanorobots, manipulation, assembly and sensing using nanorobots, molecular motors, and nanorobotics for nanomedicine.
151-0641-00LIntroduction to Robotics and Mechatronics Information Belegung eingeschränkt - Details anzeigen
Number of participants limited to 45.

Enrollment is only valid through registration on the MSRL website (Link). Registrations per e-mail is no longer accepted!
W4 KP2V + 2UB. Nelson, N. Shamsudhin
KurzbeschreibungThe aim of this lecture is to expose students to the fundamentals of mechatronic and robotic systems. Over the course of these lectures, topics will include how to interface a computer with the real world, different types of sensors and their use, different types of actuators and their use.
LernzielAn ever-increasing number of mechatronic systems are finding their way into our daily lives. Mechatronic systems synergistically combine computer science, electrical engineering, and mechanical engineering. Robotics systems can be viewed as a subset of mechatronics that focuses on sophisticated control of moving devices.

The aim of this course is to practically and theoretically expose students to the fundamentals of mechatronic and robotic systems. Over the course of the semester, the lecture topics will include an overview of robotics, an introduction to different types of sensors and their use, the programming of microcontrollers and interfacing these embedded computers with the real world, signal filtering and processing, an introduction to different types of actuators and their use, an overview of computer vision, and forward and inverse kinematics. Throughout the course, students will periodically attend laboratory sessions and implement lessons learned during lectures on real mechatronic systems. By the end of the course, you will be able to independently choose, design and integrate these different building blocks into a working mechatronic system.
InhaltThe course consists of weekly lectures and lab sessions. The weekly topics are the following:
0. Course Introduction
1. C Programming
2. Sensors
3. Data Acquisition
4. Signal Processing
5. Digital Filtering
6. Actuators
7. Computer Vision and Kinematics
8. Modeling and Control
9. Review and Outlook

The lecture schedule can be found on our course page on the MSRL website (Link)
Voraussetzungen / BesonderesThe students are expected to be familiar with C programming.
151-1224-00LÖlhydraulik und PneumatikW4 KP2V + 2UJ.  Lodewyks
KurzbeschreibungVermittlung der physikalischen und technischen Grundlagen ölhydraulischer und pneumatischer Systeme und ihrer Bauelemente wie Pumpen, Motoren, Zylinder und Ventile, mit Schwergewicht auf der Servo- und Proportionaltechnik und der Regelung fluidischer Antriebe. Überblick über Anwendungsbeispielen aus dem Maschinenbau.
LernzielDer Student
- kann die Funktionsweise eines ölhydraulischen oder pneumatischen Systems interpretieren und kann einfache Schaltungen entwerfen
- kann den Aufbau und die Funktionsweise der Bauelemente erklären und kann sie nach Anforderungen dimensionieren und auswählen
- kann das dynamische Verhalten eines servohydraulischen Zylinder- antriebes simulieren und kann eine optimale Zustandsregelung mit Beobachter auslegen.
InhaltBedeutung der Oelhydraulik und Pneumatik, Begriffe, Anwendungsbeispiele,
Repetitorium der wichtigsten strömungstechnischen Grundlagen u.a. Kompressibilität eines Fluides, Durchfluss durch Drosseln und Spalten und Reibungsverluste in Leitungen.
Aufbau und Elemente hydraulischer und pneumatischer Anlagen, Funktion und Bauformen von Pumpen, Motoren und Zylinder, Druck-, Mengen-, Sperr-, Wege-, Proportional- und Servoventile,
Grundschaltungen hydraulischer und pneumatischer Systeme.
Dynamisches Verhalten und Zustandsregelung hydraulischer und pneumatischer Servoantriebe.
Übungen
Rechenübungen zur Auslegung fluidischer Antriebe
Aufnahme der Kennlinien von Drosseln, Ventilen und Pumpen
Aufbau eines pneumatisch gesteuerten Antriebes
Simulation und experimentelle Untersuchung eines zustandsgeregelten servohydraulischen Zylinderantriebes.
SkriptAutographie Oelhydraulik
Manuskript Zustandsregelung eines Servohydraulischen Zylinderantriebes
Manuskript Elemente einer Druckluftversorgung
Manuskript Modellierung eines Servopneumatischen Zylinderantriebes
Voraussetzungen / BesonderesDie Vorlesung eignet sich für Studierende ab dem 5. Semester. Im FS2021 finden die Vorlesungen mindestens bis Ostern ausschliesslich digital statt. Alle notwendigen Informationen und Unterlagen befinden sich auf Moodle.
151-0135-00LErgänzendes Projekt für die Fokus-Vertiefung Belegung eingeschränkt - Details anzeigen
Nur für D-MAVT Bachelor-Studierende der Fokusvertiefung.
Für die Belegung der Lerneinheit kontaktieren Sie bitte die D-MAVT Studienadministration.
W1 KP2AProfessor/innen
KurzbeschreibungSelbständige Einarbeitung in ein umgrenztes Teilgebiet der gewählten Fokus-Vertiefung
LernzielSelbständige Einarbeitung in ein umgrenztes Teilgebiet der gewählten Fokus-Vertiefung
227-0518-10LDesign and Control of Electric MachinesW6 KP4GD. Bortis
KurzbeschreibungThis course covers modeling and control concepts of modern drive systems and provides a deeper understanding of the dynamic operation of electric machines. Different aspects arising in the design of electric drive systems are investigated. The exercises are used to consolidate the concepts discussed.
LernzielThe objective of this course is to convey knowledge on control strategies of different types of electric machines and on design principles of variable speed drive systems. A dynamic modeling of the electromechanical system is investigated, enabling the proper design of cascaded speed, torque/current controllers. Further objectives are the identification of machine parameters and a short insight into basic inverter circuits applied in advanced motor drive systems. Exercises are used to consolidate the presented theoretical concepts.
Inhalt1. Introduction to variable speed motor drive systems consisting of:
- Electromechanical system
- Power electronic system
- Control system
- Measurement system

2. Control structures and strategies of DC Machine/Synchronous machine/Asynchronous machine/Brushless DC machine.
- Cascaded control
- U/f Control
- Slip Control
- Field-oriented control

3. Dynamic Operation of electric machines
- Dynamic modeling of electromechanical system
- Controller types and design
- Current/torque control
- Speed control (Voltage control / Flux weakening)

4. Power electronic inverter circuits in variable speed drive systems
- Voltage and current source inverter systems
- Basic operation and pulse width modulation

5. Identification of machine parameters

6. Design principles of variable speed motor drives systems
SkriptLecture notes and associated exercises including correct answers
Voraussetzungen / BesonderesPrerequisites: Fundamentals of Electric Machines
Mikrosysteme und Nanotechnologie
Fokus-Koordinator: Prof. Christofer Hierold
NummerTitelTypECTSUmfangDozierende
151-0643-00LStudies on Micro and Nano Systems
Dieser Kurs steht für Austauschstudierende nicht zur Verfügung.
W+5 KP11ABetreuer/innen
KurzbeschreibungThe students get familiarized with the challenges of the fascinating and interdisciplinary field of Micro- and Nanosystems. They are introduced to the basics of independent non-experimental scientific research and are able to summarize and to present the results efficiently.
LernzielThe students get familiarized with the challenges of the fascinating and interdisciplinary field of Micro- and Nanosystems. They are introduced to the basics of independent non-experimental scientific research and are able to summarize and to present the results efficiently.
InhaltStudents work independently on a study of selected topics in the field of Micro- and Nanosystems. They start with a selection of scientific papers, and continue with an independent iterature research. The results (e.g. state-of-the-art, methods) are evaluated with respect to predefined criteria. Then the results are presented in an oral presentation and summarized in a report, which takes the discussion of the presentation into account.
LiteraturLiterature will be provided
151-0060-00LThermodynamics and Transport Phenomena in NanotechnologyW4 KP2V + 2UT. Schutzius, D. Taylor
KurzbeschreibungThe lecture deals with thermodynamics and transport phenomena in nano- and microscale systems. Typical areas of applications are microelectronics manufacturing and cooling, manufacturing of novel materials and coatings, surface technologies, wetting phenomena and related technologies, and micro- and nanosystems and devices.
LernzielThe student will acquire fundamental knowledge of interfacial and micro-nanoscale thermofluidics including electric field and light interaction with surfaces. Furthermore, the student will be exposed to a host of applications ranging from superhydrophobic surfaces and microelectronics cooling to solar energy, all of which will be discussed in the context of the course. The student will also judge state-of-the-art scientific research in these areas.
InhaltThermodynamic aspects of intermolecular forces; Interfacial phenomena; Surface tension; Wettability and contact angle; Wettability of Micro/Nanoscale textured surfaces: superhydrophobicity and superhydrophilicity.

Physics of micro- and nanofluidics as well as heat and mass transport phenomena at the nanoscale.

Scientific communication and exposure to state-of-the-art scientific research in the areas of Nanotechnology and the Water-Energy Nexus.
Skriptyes
151-0172-00LMicrosystems II: Devices and Applications Information W6 KP3V + 3UC. Hierold, C. I. Roman
KurzbeschreibungThe students are introduced to the fundamentals and physics of microelectronic devices as well as to microsystems in general (MEMS). They will be able to apply this knowledge for system research and development and to assess and apply principles, concepts and methods from a broad range of technical and scientific disciplines for innovative products.
LernzielThe students are introduced to the fundamentals and physics of microelectronic devices as well as to microsystems in general (MEMS), basic electronic circuits for sensors, RF-MEMS, chemical microsystems, BioMEMS and microfluidics, magnetic sensors and optical devices, and in particular to the concepts of Nanosystems (focus on carbon nanotubes), based on the respective state-of-research in the field. They will be able to apply this knowledge for system research and development and to assess and apply principles, concepts and methods from a broad range of technical and scientific disciplines for innovative products.

During the weekly 3 hour module on Mondays dedicated to Übungen the students will learn the basics of Comsol Multiphysics and utilize this software to simulate MEMS devices to understand their operation more deeply and optimize their designs.
InhaltTransducer fundamentals and test structures
Pressure sensors and accelerometers
Resonators and gyroscopes
RF MEMS
Acoustic transducers and energy harvesters
Thermal transducers and energy harvesters
Optical and magnetic transducers
Chemical sensors and biosensors, microfluidics and bioMEMS
Nanosystem concepts
Basic electronic circuits for sensors and microsystems
SkriptHandouts (on-line)
151-0516-00LNicht-glatte Dynamik
Diese Lerneinheit wird zum letzten Mal im FS21 angeboten.
W5 KP5GC. Glocker
KurzbeschreibungUngleichungsprobleme in der Dynamik, speziell Reib- und Stoßprobleme mit Geschwindigkeits- und Beschleunigungssprüngen. Modellierung von einseitigen Kontakten, Reibung, Freiläufen, vorgespannten Federn. Formulierung über mengenwertige Funktionen als lineare Komplementaritätsprobleme. Numerische Zeitintegration des kombinierten Reib-Stoss-Kontaktproblems.
LernzielDie Vorlesung vermittelt den Studierenden einen Einstieg in die moderne Behandlung von Ungleichungsproblemen in der Dynamik. Der Vorlesungsstoff ist speziell auf reibungsbehaftete Kontakte in der Mechanik zugeschnitten, läßt sich aber strukturell auf eine große Klasse von Ungleichungsproblemen in den technischen Wissenschaften übertragen. Ziel der Veranstaltung ist es, die Studierenden mit einer konsistenten Erweiterung der klassischen Mechanik auf Systeme mit Unstetigkeiten vertraut zu machen, und den Umgang mit Ungleichungen in der Form von mengenwertigen Stoffgesetzen zu erlernen.
Inhalt1. Kinematik: Drehung, Geschwindigkeit, Beschleunigung, virtuelle Verschiebung.
2. Aufbau der Mechanik: Definition der Kraft, virtuelle Arbeit, innere und äussere Kräfte, Wechselwirkungsprinzip, Erstarrungsprinzip, mathematische Form des Freischneidens, Definition der idealen Bindung.
3. Starre Körper: Variationelle Form der Gleichgewichtsbedingungen, Systeme starrer Körper, Übergang auf Minimalkoordinaten.
4. Einfache generalisierte Kräfte: Generalisierte Kraftrichtungen, Kinematik der Kraftelemente, Kraftgesetze, Parallel- und Reihenschaltung.
5. Darstellung mengenwertiger Kraftgesetze: Normalkegel, proximale Punkte, exakte Regularisierung. Anwendung auf einseitige Kontakte und Coulomb-Reibgesetze.
6. Stossfreie und stossbehaftete Bewegung: Bewegungsgleichung, Stossgleichung, Newton-Stossgesetze, Diskussion von Mehrfachstössen, Kane's Paradoxon.
7. Numerische Behandlung: Lineares Komplementaritätsproblem (LCP), Zeitdiskretisierung nach Moreau, Kontaktproblem in lokalen Koordinaten als LCP.
SkriptEs gibt kein Vorlesungsskript. Den Studierenden wird empfohlen, eine eigene Mitschrift der Vorlesung anzufertigen. Ein Katalog mit Übungsaufgaben und den zugehörigen Musterlösungen wird ausgegeben.
Voraussetzungen / BesonderesKinematik und Statik & Dynamics
151-0540-00LExperimentelle MechanikW4 KP2V + 1UJ. Dual, T. Brack
Kurzbeschreibung1. Allgemeines: Messkette, Frequenzgang, Schwingungen und Wellen in kontinuierlichen Systemen, Modalanalyse, Statistik, Digitale Signalanalyse, Phasenregelkreis 2. Optische Methoden 3. Piezoelektrizität 4. Elektromagnetische Erzeugung und Messung von Schwingungen und Wellen 5. Kapazitive Messaufnehmer
LernzielVerständnis, quantitative Modellierung und praktische Anwendung von experimentellen Methoden zur Erzeugung und Messung von mechanischen Grössen (Bewegung, Deformation, Spannungen)
Inhalt1. Allgemeines: Messkette, Frequenzgang, Frequenzgangmessung, Schwingungen und Wellen in kontinuierlichen Systemen, Modalanalyse, Statistik, Digitale Signalanalyse, Phasenregelkreis 2. Optische Methoden (Akustooptische Modulation, Interferometrie, Holographie, Spannungsoptik, Schattenoptik, Moiré Methoden) 3. Piezoelektrische Materialien: Grundgleichungen, Anwendungen Beschleunigungsaufnehmer, Verschiebungsmessung) 4. Elektromagnetische Erzeugung und Messung von Schwingungen und Wellen 5. Kapazitive Messaufnehmer, Praktika und Uebungen
Skriptja
Voraussetzungen / BesonderesVoraussetzungen: Mechanik I bis III, Physik, Elektrotechnik
151-0622-00LMeasuring on the Nanometer ScaleW2 KP2GA. Stemmer
KurzbeschreibungIntroduction to theory and practical application of measuring techniques suitable for the nano domain.
LernzielIntroduction to theory and practical application of measuring techniques suitable for the nano domain.
InhaltConventional techniques to analyze nano structures using photons and electrons: light microscopy with dark field and differential interference contrast; scanning electron microscopy, transmission electron microscopy. Interferometric and other techniques to measure distances. Optical traps. Foundations of scanning probe microscopy: tunneling, atomic force, optical near-field. Interactions between specimen and probe. Current trends, including spectroscopy of material parameters.
SkriptSlides and recordings available via Moodle (registered participants only).
  •  Seite  1  von  4 Nächste Seite Letzte Seite     Alle