From 2 November 2020, the autumn semester 2020 will take place online. Exceptions: Courses that can only be carried out with on-site presence.
Please note the information provided by the lecturers via e-mail.

Search result: Courses in Spring Semester 2017

Mechanical Engineering Bachelor Information
6. Semester
Focus Specialization
Mechatronics
Focus Coordinator: Prof. Bradley Nelson
To achieve the 20 credits for Focus Specialization Mechatronics, 151-0640-00L Studies on Mechatronics is compulsory.
Elective Courses
NumberTitleTypeECTSHoursLecturers
151-0206-00LEnergy Systems and Power EngineeringW4 credits2V + 2U
151-0206-00 VEnergy Systems and Power Engineering2 hrs
Tue10-12ML H 44 »
R. S. Abhari, A. Steinfeld
151-0206-00 UEnergy Systems and Power Engineering
Die Übungen finden ab der 2. Semesterwoche statt.
2 hrs
Tue12-14ML F 36 »
12-14ML H 44 »
R. S. Abhari, A. Steinfeld
151-0516-00LNon-smooth DynamicsW5 credits5G
151-0516-00 GNicht-glatte Dynamik5 hrs
Mon12-14HG E 1.1 »
Tue09-10ML F 34 »
12-14HG E 1.1 »
C. Glocker
151-0540-00LExperimental Mechanics Information W4 credits2V + 1U
151-0540-00 VExperimentelle Mechanik2 hrs
Fri10-12ML F 39 »
J. Dual
151-0540-00 UExperimentelle Mechanik1 hrs
Fri12-13ML F 39 »
J. Dual
151-0630-00LNanorobotics Information W4 credits2V + 1U
151-0630-00 VNanorobotics2 hrs
Tue10-12ML F 36 »
06.06.10-12ML F 36 »
S. Pané Vidal, B. Nelson
151-0630-00 UNanorobotics1 hrs
Thu10-11CHN C 14 »
S. Pané Vidal, B. Nelson
151-0641-00LIntroduction to Robotics and Mechatronics Information Restricted registration - show details
Number of participants limited to 60.

Enrollment is only valid through registration on the MSRL Website (www.msrl.ethz.ch) and will open on 12 December 2016. Registration per e-mail is no longer accepted!
W4 credits2V + 2U
151-0641-00 VIntroduction to Robotics and Mechatronics
Permission from lecturers required for all students.
2 hrs
Mon16-18ML F 38 »
10.04.16-18ML D 28 »
B. Nelson
151-0641-00 UIntroduction to Robotics and Mechatronics
Permission from lecturers required for all students.
A choice of four different time slots is arranged for the exercise session in a goup room.
The students will be informed about it during the enrollment process.
2 hrs
29.05.16-18ML F 36 »
B. Nelson
151-1224-00LOil-Hydraulics and PneumaticsW4 credits2V + 2U
151-1224-00 VÖlhydraulik und Pneumatik2 hrs
Wed08-10ML F 39 »
31.05.10-13IFW A 36 »
J.  Lodewyks, K. Wegener
151-1224-00 UÖlhydraulik und Pneumatik2 hrs
Wed10-12ML F 39 »
J.  Lodewyks, K. Wegener
227-0124-00LEmbedded Systems Information W6 credits4G
227-0124-00 GEmbedded Systems
Übungen in Gruppen.
4 hrs
Wed13-17ETF C 1 »
15-17ETZ D 61.1 »
15-17ETZ D 61.2 »
17-19ETZ D 61.1 »
17-19ETZ D 61.2 »
L. Thiele
227-0516-01LElectrical Drive Systems I Information W6 credits4G
227-0516-01 GElektrische Antriebssysteme I4 hrs
Tue13-17ETF E 1 »
P. Steimer, A. Omlin, C. A. Stulz
151-0135-00LAdditional Case for the Focus Specialization Restricted registration - show details
Exclusive for D-MAVT Bachelor's students in Focus Specialization.
For enrollment, please contact the D-MAVT Student Administration.
W1 credit2A
151-0135-00 AErgänzendes Projekt für die Fokus-Vertiefung Special students and auditors need a special permission from the lecturers.30s hrsby appt.Professors
Microsystems and Nanoscale Engineering
Focus Coordinator: Prof. Christofer Hierold
NumberTitleTypeECTSHoursLecturers
151-0060-00LThermodynamics and Energy Conversion in Micro- and Nanoscale TechnologiesW4 credits2V + 2U
151-0060-00 VThermodynamics and Energy Conversion in Micro- and Nanoscale Technologies2 hrs
Wed13-15ML F 39 »
T. Schutzius, H. Eghlidi
151-0060-00 UThermodynamics and Energy Conversion in Micro- and Nanoscale Technologies2 hrs
Thu09-11ML F 40 »
24.05.12-15HG E 23 »
31.05.12-15HG E 23 »
T. Schutzius, H. Eghlidi
151-0516-00LNon-smooth DynamicsW5 credits5G
151-0516-00 GNicht-glatte Dynamik5 hrs
Mon12-14HG E 1.1 »
Tue09-10ML F 34 »
12-14HG E 1.1 »
C. Glocker
151-0540-00LExperimental Mechanics Information W4 credits2V + 1U
151-0540-00 VExperimentelle Mechanik2 hrs
Fri10-12ML F 39 »
J. Dual
151-0540-00 UExperimentelle Mechanik1 hrs
Fri12-13ML F 39 »
J. Dual
151-0622-00LMeasuring on the Nanometer ScaleW2 credits2G
151-0622-00 GMeasuring on the Nanometer Scale2 hrs
Thu10-12ML F 38 »
A. Stemmer
151-0630-00LNanorobotics Information W4 credits2V + 1U
151-0630-00 VNanorobotics2 hrs
Tue10-12ML F 36 »
06.06.10-12ML F 36 »
S. Pané Vidal, B. Nelson
151-0630-00 UNanorobotics1 hrs
Thu10-11CHN C 14 »
S. Pané Vidal, B. Nelson
151-0643-00LStudies on Micro and Nano Systems Information
Please contact one of the following professors directly:
J. Dual, C. Hierold, B. Nelson, D. Norris, D. Poulikakos, S.E. Pratsinis and A. Stemmer

This course is not available to incoming exchange students.
W5 credits5A
151-0643-00 AStudies on Micro and Nano Systems5 hrsby appt.Professors
151-0902-00LMicro- and Nanoparticle TechnologyW6 credits2V + 2U
151-0902-00 VMicro- and Nanoparticle Technology2 hrs
Tue10-12CLA E 4 »
S. E. Pratsinis, R. Büchel, M. Eggersdorfer, K. Wegner
151-0902-00 UMicro- and Nanoparticle Technology2 hrs
Wed15-17CLA E 4 »
K. Wegner, R. Büchel, M. Eggersdorfer
151-0966-00LIntroduction to Quantum Mechanics for EngineersW4 credits2V + 2U
151-0966-00 VIntroduction to Quantum Mechanics for Engineers2 hrs
Wed10-12HG E 5 »
D. J. Norris
151-0966-00 UIntroduction to Quantum Mechanics for Engineers
The exercise will start in the 2nd week of the Semester.
2 hrs
Wed13-15IFW A 36 »
13-15LFW E 15 »
Thu08-10CHN C 14 »
08-10NO C 6 »
D. J. Norris
151-0135-00LAdditional Case for the Focus Specialization Restricted registration - show details
Exclusive for D-MAVT Bachelor's students in Focus Specialization.
For enrollment, please contact the D-MAVT Student Administration.
W1 credit2A
151-0135-00 AErgänzendes Projekt für die Fokus-Vertiefung Special students and auditors need a special permission from the lecturers.30s hrsby appt.Professors
Manufacturing Science
Focus Coordinator: Prof. Konrad Wegener
To achieve the required 20 credit points for the focus specialization you need to pass all 3 compulsory courses (HS/FS). The other 8 credit points can be achieved from the elective courses.
Compulsory Courses
NumberTitleTypeECTSHoursLecturers
151-0720-00LProduction Machines IO4 credits4G
151-0720-00 GProduktionsmaschinen I4 hrs
Tue10-12ML H 41.1 »
Thu10-12CLA E 4 »
K. Wegener, S. Weikert
Elective Courses
NumberTitleTypeECTSHoursLecturers
151-0304-00LEngineering Design II Information W4 credits4G
151-0304-00 GDimensionieren II
Vorlesung: MI, 8-10
Übungen: MI, 10-12
4 hrs
Wed08-10ML H 44 »
10-12HG D 3.1 »
10-12HG D 5.1 »
10-12IFW A 34 »
10-12IFW B 42 »
10-12IFW C 31 »
10-12IFW C 33 »
10-12ML J 34.1 »
10-12ML J 34.3 »
K. Wegener
  • First page Previous page Page  2  of  5 Next page Last page     All