Mechanical Engineering Master  |
 Core Courses |
| Number | Title | Type | ECTS | Hours | Lecturers |
|---|
| 151-0105-00L | Imaging in Fluid Dynamics | W | 4 credits | 3G | F. Coletti |
| 151-0109-00L | Turbulent Flows | W | 4 credits | 2V + 1U | P. Jenny |
| 151-0125-00L | Hydrodynamics and Cavitation | W | 4 credits | 3G | O. Supponen |
| 151-0163-00L | Nuclear Energy Conversion | W | 4 credits | 2V + 1U | A. Manera |
| 151-0204-00L | Aerospace Propulsion | W | 4 credits | 2V + 1U | R. S. Abhari,
V. Iranidokht |
| 151-0209-00L | Renewable Energy Technologies | W | 4 credits | 3G | A. Bardow,
E. Casati |
| 151-0213-00L | Fluid Dynamics with the Lattice Boltzmann Method | W | 4 credits | 3G | I. Karlin |
| 151-0215-00L | Fundamentals of Acoustics  Number of participants limited to 40. | W | 4 credits | 3G | N. Noiray,
B. Van Damme |
| 151-0216-00L | Wind Energy | W | 4 credits | 2V + 1U | N. Chokani |
| 151-0221-00L | Introduction to Modeling and Optimization of Sustainable Energy Systems | W | 4 credits | 4G | G. Sansavini,
A. Bardow,
S. Moret |
| 151-0225-00L | Material Characterization by X-ray Techniques: Diffraction, Absorption, Total Scattering | W | 4 credits | 3G | P. M. Abdala,
D. Piankova |
| 151-0227-00L | Basics of Air Transport (Aviation I) | W | 4 credits | 3G | P. Wild |
| 151-0245-00L | Energy Systems Analysis: an Introduction and Overview with Applications | W | 4 credits | 2V + 2U | R. McKenna,
P. Burgherr,
E. Panos,
R. Sacchi |
| 151-0251-00L | Principles, Efficiency Optimization and Future Applications of IC Engines | W | 4 credits | 2V + 1U | Y. Wright,
P. Soltic |
| 151-0317-00L | Visualization, Simulation and Interaction - Virtual Reality II | W | 4 credits | 3G | A. Kunz |
| 151-0323-00L | Hands-on Self-Driving Cars with Duckietown Number of participants limited to 30.
Note: The previous course title until HS20 "Autonomous Mobility on Demand: From Car to Fleet". | W | 4 credits | 4G | M. Di Cicco |
| 151-0325-00L | Planning and Decision Making for Autonomous Robots | W | 4 credits | 2V + 1U | E. Frazzoli |
| 151-0353-00L | Mechanics of Composite Materials | W | 4 credits | 2V + 1U | G. Pappas |
| 151-0368-00L | Aeroelasticity | W | 4 credits | 2V + 1U | M. Righi |
| 151-0371-00L | Advanced Model Predictive Control Number of participants limited to 60. | W | 4 credits | 2V + 1U | M. Zeilinger,
A. Carron,
L. Hewing,
J. Köhler |
| 151-0409-00L | Multiphysics Modeling and Simulation | W | 4 credits | 2V + 2U | C. I. Roman |
| 151-0509-00L | Acoustics in Fluid Media: From Robotics to Additive Manufacturing | W | 4 credits | 3G | D. Ahmed |
| 151-0524-00L | Continuum Mechanics I | W | 4 credits | 2V + 1U | A. E. Ehret |
| 151-0525-00L | Dynamic Behavior of Materials | W | 4 credits | 2V + 2U | T. Tancogne-Dejean,
C. Roth |
| 151-0529-00L | Nonlinear FEA Does not take place this semester.
Note: The previous course title until HS23 "Computational Mechanics II: Nonlinear FEA" | W | 4 credits | 2V + 2U | L. De Lorenzis |
| 151-0532-00L | Nonlinear Dynamics and Chaos I | W | 4 credits | 4G | G. Haller |
| 151-0535-00L | Optical Methods in Experimental Mechanics and Processing Technology Does not take place this semester. | W | 4 credits | 3G | |
| 151-0544-00L | Metal Additive Manufacturing - Mechanical Integrity and Process Simulation Note: The previous course title until HS22 "Metal Additive Manufacturing - Mechanical Integrity and Numerical Analysis" | W | 4 credits | 3G | E. Hosseini |
| 151-0550-00L | Adaptive Materials for Structural Applications | W | 4 credits | 3G | A. Bergamini |
| 151-0563-01L | Dynamic Programming and Optimal Control | W | 4 credits | 2V + 1U | R. D'Andrea |
| 151-0567-00L | Engine Systems | W | 4 credits | 3G | C. Onder |
| 151-0569-00L | Vehicle Propulsion Systems | W | 4 credits | 3G | C. Onder,
P. Elbert |
| 151-0593-00L | Embedded Control Systems | W | 4 credits | 6G | C. Onder,
M. Schmid Daners |
| 151-0604-00L | Microrobotics | W | 4 credits | 3G | B. Nelson |
| 151-0620-00L | Embedded MEMS Lab | W | 5 credits | 3P | C. Hierold,
A. Güntner,
M. Haluska |
| 151-0621-00L | Microsystems I: Process Technology and Integration | W | 6 credits | 3V + 2U | M. Haluska,
C. Hierold |
| 151-0632-00L | Vision Algorithms for Mobile Robotics (University of Zurich) | W | 6 credits | 2V + 2U | D. Scaramuzza |
| 151-0642-00L | Seminar on Micro and Nanosystems | Z | 0 credits | 1S | C. Hierold |
| 151-0655-00L | Skills for Creativity and Innovation | W | 4 credits | 4G | C. Kobe,
I. Goller |
| 151-0703-00L | Operational Simulation of Production Lines | W | 4 credits | 2V + 1U | A. Kunz,
P. Acél |
| 151-0709-00L | Stochastic Methods for Engineers and Natural Scientists | W | 4 credits | 4G | D. W. Meyer-Massetti |
| 151-0720-00L | Production Machines I | W | 4 credits | 4G | M. Bambach,
J. Mayr |
| 151-0723-00L | Manufacturing of Electronic Devices | W | 4 credits | 3G | A. Kunz,
R.‑D. Moryson,
F. Reichert |
| 151-0725-00L | Exciting Leadership in a Thrilling Real Business World | W | 4 credits | 3G | A. Halbleib |
| 151-0727-00L | Colloquium on Manufacturing Technology | W | 4 credits | 2.5K | A. Kunz |
| 151-0741-00L | Sustainable Materials | W | 4 credits | 2V + 2A | L. Deillon |
| 151-0833-00L | Applied Finite Element Analysis | W | 4 credits | 2V + 2U | B. Berisha,
D. Mohr |
| 151-0851-00L | Robot Dynamics | W | 4 credits | 2V + 2U | M. Hutter,
R. Siegwart |
| 151-0905-00L | Medical Technology Innovation - From Concept to Clinics | W | 4 credits | 3G | I. Herrmann |
| 151-0913-00L | Introduction to Photonics | W | 4 credits | 2V + 2U | R. Quidant,
J. Ortega Arroyo |
| 151-0917-00L | Mass Transfer | W | 4 credits | 2V + 2U | M. Tibbitt,
V. Mavrantzas,
C.‑J. Shih |
| 151-0927-00L | Rate-Controlled Separations in Fine Chemistry | W | 6 credits | 3V + 1U | M. Mazzotti,
V. Becattini,
N. Casas,
F. Kiefer |
| 151-0941-00L | Molecular Sensors: From Fundamentals to Health and Environmental Applications Note: previous course title until HS23 " Molecular Health Sensors and Devices" | W | 4 credits | 2V + 2U | A. Güntner,
P. Gerber |
| 151-0951-00L | Process Design and Safety | W | 4 credits | 2V + 1U | F. Trachsel,
C. Hutter |
| 151-1116-00L | Introduction to Aircraft and Car Aerodynamics | W | 4 credits | 3G | M. Immer,
F. Schröder-Pernet |
| 151-3204-00L | Coaching Innovation Projects | W | 2 credits | 2V | I. Goller,
K. Weiss |
| 151-3209-00L | Engineering Design Optimization | W | 4 credits | 4G | K. Shea,
T. Stankovic |
| 151-3215-00L | Design for Additive Manufacturing Please write a short motivation letter to apply for the course. The motivation letter should state why you wish to attend the course. Please also mention any experience you have with relevant topics such as CAD, project work, additive manufacturing (AM), simulation or experimental design. Please also mention in the letter if you already have a proposal for an AM component to be designed as part of the project, or if you have a real-world challenge that you could address using AM. Please send your letter to Julian Ferchow (email: ferchowj@ethz.ch). | W | 4 credits | 2G | M. Meboldt,
J. Ferchow |
| 151-8101-00L | International Engineering: from Hubris to Hope | W | 4 credits | 3G | E. Tilley,
J. Freihardt,
C. Walder |
| 151-9905-00L | Applied Category Theory for Engineering I Note: The previous course title until HS22 "Applied Compositional Thinking for Engineers II" | W | 4 credits | 3G | J. Lorand |
| 101-0187-00L | Structural Reliability and Risk Analysis | W | 3 credits | 2G | S. Marelli |
| 227-0124-00L | Embedded Systems | W | 6 credits | 4G | M. Magno |
| 227-0225-00L | Linear System Theory | W | 6 credits | 5G | J. Lygeros,
A. Tsiamis |
| 227-0385-10L | Biomedical Imaging | W | 6 credits | 5G | S. Kozerke,
K. P. Prüssmann |
| 227-0386-00L | Biomedical Engineering | W | 4 credits | 3G | J. Vörös,
S. J. Ferguson,
S. Kozerke,
M. P. Wolf,
M. Zenobi-Wong |
| 227-0393-10L | Bioelectronics and Biosensors | W | 6 credits | 2V + 2U | J. Vörös,
M. F. Yanik |
| 227-0447-00L | Image Analysis and Computer Vision | W | 6 credits | 3V + 1U | E. Konukoglu,
E. Erdil,
F. Yu |
| 227-0517-10L | Fundamentals of Electric Machines | W | 6 credits | 4G | D. Bortis |
| 227-0523-00L | Railway Systems I | W | 6 credits | 4G | M. Meyer |
| 252-0535-00L | Advanced Machine Learning | W | 10 credits | 3V + 2U + 4A | J. M. Buhmann,
C. Cotrini Jimenez |
| 252-0543-01L | Computer Graphics | W | 8 credits | 3V + 2U + 2A | M. Gross,
M. Papas |
| 227-0689-00L | System Identification | W | 4 credits | 2V + 1U | R. Smith |
| 227-0939-00L | Cell Biophysics | W | 6 credits | 4G | T. Zambelli |
| 227-0981-00L | Cross-Disciplinary Research and Development in Medicine and Engineering A maximum of 12 medical degree students and 12 (biomedical) engineering degree students can be admitted, their number should be equal.
IMPORTANT: Note that a special permission from the lecturers is required to register for this course. Contact the head lecturer to that end. | W | 4 credits | 2V + 2A | V. Kurtcuoglu,
D. de Julien de Zelicourt,
M. Meboldt |
| 227-0965-00L | Micro and Nano-Tomography of Biological Tissues | W | 4 credits | 3G | M. Stampanoni,
F. Marone Welford |
| 252-0834-00L | Information Systems for Engineers | W | 4 credits | 2V + 1U | G. Fourny |
| 252-3110-00L | Human Computer Interaction | W | 8 credits | 3V + 2U + 2A | C. Holz,
A. Wang |
| 263-5210-00L | Probabilistic Artificial Intelligence | W | 8 credits | 3V + 2U + 2A | A. Krause |
| 263-5902-00L | Computer Vision | W | 8 credits | 3V + 1U + 3A | M. Pollefeys,
S. Tang |
| 351-0555-00L | Open- and User Innovation Not for students belonging to D-MTEC! | W | 3 credits | 2G | S. Häfliger,
S. Spaeth |
| 363-0445-00L | Production and Operations Management | W | 3 credits | 2G | T. Netland |
| 363-0541-00L | Economic Dynamics and Complexity | W | 3 credits | 3G | F. Schweitzer,
L. Verginer |
| 376-0121-00L | Multiscale Bone Biomechanics | W | 6 credits | 3S | R. Müller,
X.‑H. Qin |
| 376-1176-00L | Wearable and Mobile Technologies of the Future - Focus on Sports and Health | W | 4 credits | 3G | C. Menon,
C. Ahmadizadeh,
C. Otesteanu |
| 376-1177-00L | Human Factors I | W | 3 credits | 2V | M. Menozzi Jäckli |
| 376-1219-00L | Rehabilitation Engineering II: Rehabilitation of Sensory and Vegetative Functions | W | 3 credits | 2V | R. Riener,
O. Lambercy |
| 376-1504-00L | Physical Human Robot Interaction (pHRI) | W | 4 credits | 2V + 2U | O. Lambercy,
P. Wolf |
| 376-1651-00L | Clinical and Movement Biomechanics | W | 4 credits | 3G | D. K. Ravi,
S. H. Hosseini Nasab,
R. List,
further lecturers |
| 376-1714-00L | Biocompatible Materials | W | 4 credits | 3V | K. Maniura,
M. Rottmar,
M. Zenobi-Wong |
| 376-1721-00L | Bone Biology: Basics, Research and Clinics | W | 2 credits | 2V | E. Wehrle,
G. A. Kuhn,
M. Rüger |
| 376-1985-00L | Trauma Biomechanics | W | 4 credits | 2V + 1U | K.‑U. Schmitt,
M. H. Muser |
| 401-0647-00L | Introduction to Mathematical Optimization | W | 5 credits | 2V + 1U | D. Adjiashvili |
| 402-0341-00L | Medical Physics I | W | 6 credits | 2V + 1U | P. Manser |
| 551-0319-00L | Cellular Biochemistry (Part I) | W | 3 credits | 2V | U. Kutay,
F. Allain,
T. Kleele,
I. Zemp |
